FS Axle back Borla S-Type Exhaust - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

automatic1221 · 12-08-2010, 02:53 PM

SOLD

FS Axle back Borla S-Type Exhaust
Selling my axle back Borla S-Type exhaust. I do have the factory body kit on it so they do not have any tips on it, but obviously can be added very easily. I put the exhaust on a week ago and it has less than 50 miles on it. I want a louder more aggressive sound. They are still on my car, but my Camaro is a weekender only car. Won't drive it again with the exhaust on it. New from Borla it retails for over $750 all I'm trying to get out of it is $550.

automatic1221 · 12-08-2010, 06:47 PM

Save time from having to order them and come get mine today

automatic1221 · 12-09-2010, 08:31 AM

I have had a little interest, but no one serious yet. Still FS

dukefanok · 12-09-2010, 12:14 PM

You might want to lower your price, I was selling an exahust a while back and wasn't aware what you could buy this stuff for now. Maryland Speed is selling these new for $547. Good luck with the sale.

automatic1221 · 12-09-2010, 01:45 PM

It is a new set of exhaust, drive time from the shop to the house is all that was put on it. Car hasn't been touched since then. Plus no dealing with shipping and the waitting for it to get there. Still a good deal. Thank you though for letting me know they are going for that, I'll have to check out the website. can you send a link to the exhaust?

dukefanok · 12-09-2010, 05:46 PM

I hear you...I had a 3" Borla system that was 1800 but was selling for 1200 new when I got rid of it. Here is the link to maryland speed.
http://marylandspeed.com/borla-stype...75-p-2364.html

automatic1221 · 12-09-2010, 05:53 PM

Well that's a good deal there from maryland speed, but if you local (Tyler Tx.) you can snag them same day. I'm still pretty good at $550, but feel free to make an offer if you are local and want them asap.

automatic1221 · 12-11-2010, 09:10 AM

Alright everyone I need these gone, lets do it for $500.

automatic1221 · 12-13-2010, 09:41 AM

Took the exhaust off my car over the weekend, had to take her out for a spin. Straight pipes is just a little too much, but the exhaust is off the car ready to go when you are.

automatic1221 · 12-14-2010, 08:53 AM

Took her out yesterday, no pipes just straight exhaust. Borla is still for sale

Dr Jkel · 12-14-2010, 08:58 AM

What are you going to use Borla ATAK?

automatic1221 · 12-14-2010, 09:01 AM

I would like to use either that or a Corsa exhaust. Just something more aggressive. I am loyal to Borla because I have ran their cat backs on my Corvettes before, but I am hearing good things about the Corsa too.

Dr Jkel · 12-14-2010, 09:04 AM

OK, I have the ATAK that is too aggressive for me. Really has alot of drone, but I have a cammed car and that may be the reason. I took it off after 100 miles.

automatic1221 · 12-14-2010, 09:11 AM

Mine is all stock as of now, I hear the ATAK has less drone on a more stock car, but I have no idea on a cammed car. Would you be interested in trading exhaust? Axle back that is

12-08-2010, 02:53 PM	#1
automatic1221 Drives: 2010 Camaro 2SS RS Join Date: Dec 2010 Location: Tyler Posts: 227	FS Axle back Borla S-Type Exhaust SOLD FS Axle back Borla S-Type Exhaust Selling my axle back Borla S-Type exhaust. I do have the factory body kit on it so they do not have any tips on it, but obviously can be added very easily. I put the exhaust on a week ago and it has less than 50 miles on it. I want a louder more aggressive sound. They are still on my car, but my Camaro is a weekender only car. Won't drive it again with the exhaust on it. New from Borla it retails for over $750 all I'm trying to get out of it is $550. Attached Images Last edited by automatic1221; 12-30-2010 at 11:50 AM.

12-14-2010, 08:53 AM	#10
automatic1221 Drives: 2010 Camaro 2SS RS Join Date: Dec 2010 Location: Tyler Posts: 227	Borla Axle back for sale Took her out yesterday, no pipes just straight exhaust. Borla is still for sale Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Borla S type CatBack vs. Axle Back	nessa131	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	8	07-26-2012 10:38 PM
Headers & Exhaust Systems, Complete & Axle Back - www.PartsTaxi.com	PartsTaxi.com	V8 Bolt-Ons & Tunes	3	11-03-2010 10:31 AM
FS: Borla Touring axle back & Magnaflow 3" x-pipe	stubby	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	6	10-15-2010 09:36 AM
Manual vs Auto GTAHVIT vs PQ... The video wars.	76z28	5th Gen Camaro SS LS LT General Discussions	443	08-26-2010 12:26 PM
F/S Borla s type axle back	JCSSCamaro	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	2	04-01-2010 05:22 PM

12-08-2010, 06:47 PM	#2
automatic1221 Drives: 2010 Camaro 2SS RS Join Date: Dec 2010 Location: Tyler Posts: 227	Save time from having to order them and come get mine today

12-09-2010, 08:31 AM	#3
automatic1221 Drives: 2010 Camaro 2SS RS Join Date: Dec 2010 Location: Tyler Posts: 227	I have had a little interest, but no one serious yet. Still FS

12-09-2010, 12:14 PM	#4
dukefanok Drives: 2011 Camaro 2SS/RS Black on Black Join Date: Aug 2010 Location: Oklahoma Posts: 54	You might want to lower your price, I was selling an exahust a while back and wasn't aware what you could buy this stuff for now. Maryland Speed is selling these new for $547. Good luck with the sale.

12-09-2010, 01:45 PM	#5
automatic1221 Drives: 2010 Camaro 2SS RS Join Date: Dec 2010 Location: Tyler Posts: 227	It is a new set of exhaust, drive time from the shop to the house is all that was put on it. Car hasn't been touched since then. Plus no dealing with shipping and the waitting for it to get there. Still a good deal. Thank you though for letting me know they are going for that, I'll have to check out the website. can you send a link to the exhaust?

12-09-2010, 05:46 PM	#6
dukefanok Drives: 2011 Camaro 2SS/RS Black on Black Join Date: Aug 2010 Location: Oklahoma Posts: 54	I hear you...I had a 3" Borla system that was 1800 but was selling for 1200 new when I got rid of it. Here is the link to maryland speed. http://marylandspeed.com/borla-stype...75-p-2364.html

12-09-2010, 05:53 PM	#7
automatic1221 Drives: 2010 Camaro 2SS RS Join Date: Dec 2010 Location: Tyler Posts: 227	Well that's a good deal there from maryland speed, but if you local (Tyler Tx.) you can snag them same day. I'm still pretty good at $550, but feel free to make an offer if you are local and want them asap.

12-11-2010, 09:10 AM	#8
automatic1221 Drives: 2010 Camaro 2SS RS Join Date: Dec 2010 Location: Tyler Posts: 227	Alright everyone I need these gone, lets do it for $500.

12-13-2010, 09:41 AM	#9
automatic1221 Drives: 2010 Camaro 2SS RS Join Date: Dec 2010 Location: Tyler Posts: 227	Took the exhaust off my car over the weekend, had to take her out for a spin. Straight pipes is just a little too much, but the exhaust is off the car ready to go when you are.

12-14-2010, 08:58 AM	#11
Dr Jkel and MR. HYDE Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009 Location: Oxford, Alabama Posts: 4,375	What are you going to use Borla ATAK?

12-14-2010, 09:01 AM	#12
automatic1221 Drives: 2010 Camaro 2SS RS Join Date: Dec 2010 Location: Tyler Posts: 227	I would like to use either that or a Corsa exhaust. Just something more aggressive. I am loyal to Borla because I have ran their cat backs on my Corvettes before, but I am hearing good things about the Corsa too.

12-14-2010, 09:04 AM	#13
Dr Jkel and MR. HYDE Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009 Location: Oxford, Alabama Posts: 4,375	OK, I have the ATAK that is too aggressive for me. Really has alot of drone, but I have a cammed car and that may be the reason. I took it off after 100 miles.

12-14-2010, 09:11 AM	#14
automatic1221 Drives: 2010 Camaro 2SS RS Join Date: Dec 2010 Location: Tyler Posts: 227	Mine is all stock as of now, I hear the ATAK has less drone on a more stock car, but I have no idea on a cammed car. Would you be interested in trading exhaust? Axle back that is