10-17-2013, 08:05 AM | #1 |
Whipple Hood Clearance with MPD "Z Force Hood
Is there anyone that has the Whipple SC with a MPD "Z" hood on their Camaro that are experiencing clearance problems?
__________________
|
|
10-17-2013, 01:54 PM | #2 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
I spoke with Eric about this recently. He stated if any issues woukd be minimal and body shop could correct easy enough. I chose to wait on z force hood until Whipple installed to see if current hood will clear ok.
Sent from my SAMSUNG-SM-N900A using Tapatalk |
10-17-2013, 09:17 PM | #3 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
you mean like this one..whipple undeath hood..
__________________
|
10-17-2013, 09:18 PM | #4 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
you mean like this one..whipple undeath hood..better pic
__________________
|
10-18-2013, 05:11 AM | #5 |
That is the hood! Everything on the Whipple fits no rubbing under the bottom of the hood?
__________________
|
|
10-18-2013, 07:08 AM | #6 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
i have no issue, 427lsx with mast black label heads and 102mm throttle body...i did have issues with the coilover knobs hitting , but they are easily removed..i would install the whipple 1st , then test fit everything with play dough to check clearances, if any issues , you can always make light modification and then sand-seal and paint hood...i spent hrs checking everything 1st before painting hood..good luck
__________________
|
|
|
|
|