10-04-2009, 07:56 AM | #1 |
Drives: 2010 Camaro 2SS/RS IBM GFX Join Date: Jul 2009
Location: Virginia Beach
Posts: 42
|
Tinting the Camaros Windows?
I just got my car tinted yesterday and of course your not supposed to roll down your windows for 3-5 days cuz the tint needs time to adhere. My question is since everytime you open and close the doors on the camaro they roll down about a quarter of an inch and fully close when you shut the door. Is there a chance you may mess up the tint still?
__________________
Wizzle!
1100: 07/14/09 3000: TPW 08/31/09 3800: 09/07/09 GOT VIN SHIPPED 09/12/09 DELIEVERED TO DEALER 09/23/09 DEALER TO BUYER(ME!) 09/26/09 |
10-04-2009, 08:00 AM | #2 | |
Co-founder of CDCNY
Drives: 2016 Camaro 2LT Hyper Blue Join Date: May 2009
Location: Latham N.Y.
Posts: 829
|
Quote:
Never been told that. I have had 5 cars tinted by Ziebart, no problems at all. They didn't say anything about not using the windows. |
|
10-04-2009, 08:01 AM | #3 |
Institutionally Insane
|
There is a gap cut into the tint on the edge of the window where it sets in the weatherstripping. The gap is about 3-4mm wide and barely noticable when the window indexes.
__________________
It's got a cop motor, a 440 cubic inch plant, it's got cop tires, cop suspension, cop shocks. It's a model made before catalytic converters so it'll run good on regular gas. What do you say, is it the new Bluesmobile or what?
|
10-04-2009, 09:08 AM | #4 |
Drives: 2010 Chevrolet Camaro CGM 2LT Join Date: Jul 2009
Location: Lantana, TX
Posts: 136
|
I had my windows tinted and had a sticker across the window buttons that said not to roll them down for 48 hours. I had that done 2 weeks ago and didn't notice any issues with the tint. I looks good.
|
10-04-2009, 10:03 AM | #5 |
TigerTail
Drives: 2SS/RS/Auto/IOM/IO/Halo/Aftrburnr Join Date: Aug 2009
Location: Cumming, GA
Posts: 89
|
48 hrs is standard and all worked well in my tinting. It was hard enough not to touch the switch for 48hrs let along thinking of not touching it for 3-5 days. No you will be fine.
__________________
2SS/RS/Auto/IOM/IO/faded gills/Gill Accents/Stainless Gas Cover/AAC Dual Amber+White Halos with DRL/Afterburner breaks,Oracle Taillights, Engine Cover - Atlanta Hydro Imaging, ARH Header 1-7/8 x 3, Long X pipe W/Cats, Vararam CAI, Vengeance Racing Tune
|
10-04-2009, 10:05 AM | #6 |
Waiting...
Drives: 2009 G8 GXP M6 Join Date: Jun 2008
Location: Jamestown NC
Posts: 275
|
I was told 3 to 4 days too.
__________________
SOLD 2009 Maverick Silver G8 GXP M6
Engine Mods: TVS 2300 Magnacharger 6.5lbs, ARH 1 7/8" long tubes with catted x-pipe Roto-Fab Intake, Custom Fuel System, Tuned by Me Drivetrain Mods: Stage 4 Monster Clutch, GForce 300M Race Axles Suspension Mods: Pedders/Wretched basic drag pack - BMR trailing arms and toe rods Misc Mods: Jamesbiz Catch can - GRRRR8 Heater hose relo kit |
10-04-2009, 10:08 AM | #7 |
Drives: 2010 2ss/rs Join Date: Sep 2009
Location: Austin
Posts: 1,016
|
got mine done yesterday as well , ive always been told 2 to 3 days , it has something to do with the glue they said, i asked them about the window indexing and they said it would be fine
|
10-04-2009, 10:21 AM | #8 |
Drives: Inferno Orange 2SS Join Date: Aug 2009
Location: Louisiana
Posts: 76
|
I think you're not supposed to roll them down all the way. The gap at the top of the window can be jacked up by the weather stripping if the window goes all the way into the door. I think that the indexing won't hurt it.
|
10-04-2009, 10:49 AM | #9 |
Drives: Cars Join Date: Feb 2009
Location: N/A
Posts: 1,986
|
Indexing shouldn't affect the tint. I asked about it when I got mine done, and they said they heat the top and the bottom when they put it on, so there won't be any issues.
|
10-04-2009, 10:49 AM | #10 |
Master of All Things
Drives: '20 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,331
|
its a standard practice, just don't roll them down all the way, the indexing won't hurt anything. The guy that did mine, has done EVERY camaro that has come into my dealer, he told me specifically that the indexing wasn't a problem.
__________________
|
10-04-2009, 12:36 PM | #11 |
ours messed up because of the window indexing. we took it back the next day and he redid the drivers window, heated the lower edge going into the door with a heat gun effectively causing the glue to dry in minutes instead of days. After that there were no issues, but yes the indexing did mess ours up.
__________________
Her Hot Rod. |
|
10-04-2009, 12:39 PM | #12 |
Clap Clap
Drives: 2SS/RS LS3 Join Date: Sep 2009
Location: NC
Posts: 326
|
Doest anyone have pictures of a Black camaro with tinting?
|
10-04-2009, 12:41 PM | #13 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Yes. I had 1 window that had to be re-done.
|
10-04-2009, 01:35 PM | #14 |
Account Suspended
Drives: 89 IROC 350 Join Date: Mar 2009
Location: Back roads, southern Ohio
Posts: 12,504
|
i didnt read all responses but i asked the tinter and he said not to worry about it becasue the heat and dry that area so it wont mess up but only open the doors when absolutly nesessary. I think I opened my driver door 3 times in the 4 days. Never the pass door. No issues with mine.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
10 Camaros that should be built | SSOOCH | 5th Gen Camaro SS LS LT General Discussions | 47 | 11-03-2009 05:46 PM |
70 Camaros reported at Wentzville, MO Rail Yard | Liberty1 | Camaro Price | Ordering | Tracking | Dealers Discussions | 34 | 08-26-2009 10:40 AM |
Need Pic's of Camaro's!!!!!!!! | Camarosales70 | Camaro Photos | Spyshots | Video | Media Gallery | 0 | 07-04-2009 11:14 PM |
Chance to drive 2010 Camaros...... | fbodfather | 5th Gen Camaro SS LS LT General Discussions | 15 | 06-18-2009 08:13 AM |
Ton of new Camaros on cars.com | Shadowmind | Camaro Price | Ordering | Tracking | Dealers Discussions | 5 | 06-01-2009 09:19 PM |