01-04-2013, 10:42 PM | #1 |
Drives: 2010 Camaro 2SS RS Join Date: Nov 2011
Location: NYC
Posts: 2,387
|
Part number for trunk liner clips?
Can't find the part number- been searching for a while... The clips I need the PN for are the Xmas tree type fasteners that hold up the liner that is attached to the bottom of the trunk lid
Thanks ! |
01-04-2013, 11:17 PM | #2 |
2016 Camaro 1LT 2.0T
Drives: Nemesis Join Date: Feb 2011
Location: Albuquerque, NM
Posts: 844
|
I used to have the link to them but deleted my other Google account with more info than I thought was there...
Anyway, I know a 20 pack goes for around $8... Wishing I had the link... Sorry |
01-04-2013, 11:21 PM | #3 |
Drives: 2010 Camaro 2SS RS Join Date: Nov 2011
Location: NYC
Posts: 2,387
|
hahaha i know the feeling... did that more than once, havent learned yet
Im about to buy some of the push type clips, so i figured id pick these up as well in the same order.. ive removed my liner a few times, so my fasteners are pretty worn |
01-04-2013, 11:36 PM | #4 |
2016 Camaro 1LT 2.0T
Drives: Nemesis Join Date: Feb 2011
Location: Albuquerque, NM
Posts: 844
|
|
01-04-2013, 11:48 PM | #5 | |
Drives: 2010 Camaro 2SS RS Join Date: Nov 2011
Location: NYC
Posts: 2,387
|
Quote:
The site you posted and that ive been using has a bunch of different sizes... just wanted to try and cross reference with the part number to make sure i get the right sizes |
|
01-08-2013, 08:24 AM | #6 |
Drives: 2010 Camaro 2SS RS Join Date: Nov 2011
Location: NYC
Posts: 2,387
|
Bump
|
01-08-2013, 09:14 AM | #7 |
Barossa's handler
Drives: 2LT/RS RJT Join Date: Mar 2010
Location: Highland Chev,Aurora Ontario
Posts: 1,097
|
Which piece of trim does it hold and how many? there are a few different ones back there. Let me know and I'll get you a number ASAP.
__________________
SLP's GTA Master Specialty Vehicle and Master Parts Dealer
|
01-08-2013, 09:38 AM | #8 |
Drives: 2010 Camaro 2SS RS Join Date: Nov 2011
Location: NYC
Posts: 2,387
|
there are more all around.. maybe 11-13 or so?
but these: |
01-08-2013, 09:51 AM | #9 |
Drives: 2011 CAMARO SIM 2SS/RS Join Date: Nov 2012
Location: Chicago
Posts: 598
|
YES! i so need these, thanks for the link
|
01-08-2013, 10:00 AM | #10 |
2nd mosted hated in NM
Drives: Tuned for her Pleasure Join Date: Aug 2012
Location: Rio Rancho
Posts: 578
|
|
03-16-2014, 02:32 AM | #11 |
Aim Small...Miss Small
Drives: 2018 ZL1 M6 Join Date: Jun 2012
Location: San Jose, CA
Posts: 866
|
Anybody have a part number for these? The Christmas tree looking ones?
__________________
2010 Camaro 2SS/RS
|
03-16-2014, 04:04 AM | #12 |
U.S. Army Veteran
Drives: 2LT/RS SGM M6 Polished 20's Join Date: Mar 2011
Location: Bloomsburg, PA
Posts: 795
|
Hey guy! Didn't I send you some of these not too long ago? You must take that off a lot!! Anyway, I think I can find the Part number for you. I bought like 50 or more of them. I'll dig through some of my stuff and let you know. |
03-16-2014, 09:41 AM | #13 |
Aim Small...Miss Small
Drives: 2018 ZL1 M6 Join Date: Jun 2012
Location: San Jose, CA
Posts: 866
|
No...I bumped the thread because I needed some of these. Can you Post the part number?
Thank you
__________________
2010 Camaro 2SS/RS
|
03-16-2014, 11:00 AM | #14 |
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,563
|
What you need is GM part number 1605396 for the Christmas tree retainers. 11/16" head size, 13/16" in length, 5/16" stem diameter. However, they're like 3 bucks and change each.
Auveco sells them in packs of 25 (p/n 11146) or 100 (p/n 15414) Clipsandfasteners.com sells them for either 3 and change or 6 and change respectively. Hope this helps.
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
|
|
|
|
|