How much to Forge Stroke motor to 418ci - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

UNRIVALED SS · 05-09-2013, 08:13 AM

This Old Motörhead guy knows what he's talking about brother!

Rdunn · 05-09-2013, 03:11 PM

dont stroke it. just upgrade rods&pistons and throw the power at it....way cheaper and will run its ass off.

UNRIVALED SS · 05-09-2013, 07:51 PM

If you're on a budget, forged pistons and H beam rods will give you a solid combo. The stock crank is a good piece. Good machine work on the block and balance the rotating assembly . You'll have as solid of a motor as you'll need for a long time. When I break the one I have now. It's probably what I'll do next .

05-09-2013, 03:11 PM	#30
Rdunn Really, Really Fast Drives: 2010 Camaro SS Join Date: Feb 2013 Location: St.Louis,Mo Posts: 686	dont stroke it. just upgrade rods&pistons and throw the power at it....way cheaper and will run its ass off. __________________ Procharger F1X, TH400, E85, CBI Street Cars, DSX Tuning, 1300whp

05-09-2013, 08:13 AM	#29
UNRIVALED SS Drives: 2010 Camaro SS Join Date: Aug 2010 Location: El Paso Posts: 704 View My Garage	This Old Motörhead guy knows what he's talking about brother!

05-09-2013, 07:51 PM	#31
UNRIVALED SS Drives: 2010 Camaro SS Join Date: Aug 2010 Location: El Paso Posts: 704 View My Garage	If you're on a budget, forged pistons and H beam rods will give you a solid combo. The stock crank is a good piece. Good machine work on the block and balance the rotating assembly . You'll have as solid of a motor as you'll need for a long time. When I break the one I have now. It's probably what I'll do next .