12-09-2012, 08:51 AM | #1 |
Drives: 2LS Inferno Orange "PHOENIX" Join Date: May 2012
Location: WV
Posts: 681
|
need some help guys
ok so when u take the engine cover off ur camaro and look under it theres a firewall under the cover is there aw way i can remove that firewall so i can do some wiring under it then put it back on to protect the wires
__________________
PHOENIX 323HP "LEGENDS NEVER DIE" |
12-09-2012, 10:27 AM | #2 |
Drives: 2LS Inferno Orange "PHOENIX" Join Date: May 2012
Location: WV
Posts: 681
|
come on guys someone got to have a idea
__________________
PHOENIX 323HP "LEGENDS NEVER DIE" |
12-09-2012, 10:43 AM | #3 |
Drives: '11 Camaro 2SS/RS LS3 Join Date: Jan 2012
Location: Lexington, SC
Posts: 3,483
|
Not 100% sure but you could take a dremmel to it or just take it out.
|
12-09-2012, 10:54 AM | #4 |
Drives: Black 2011 Camaro LS Join Date: Feb 2011
Location: Texas
Posts: 1,694
|
If I remember correctly there are little metal tabs that hold it on. It's just a heat mat for noise and heat insulation.
__________________
White Fender Hashes from Big Worm Graphix with Custom White Bowties
GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs |
12-09-2012, 11:07 AM | #5 |
Drives: 2020 Camaro convertible RS Auto Join Date: Feb 2010
Location: Illinois
Posts: 887
|
It should just slide off those metal tabs. I did that on my v6 engine cover and hid the wires under it. Best I recall it just pulled off and went right back on.
|
12-09-2012, 11:24 AM | #6 |
Drives: 2LS Inferno Orange "PHOENIX" Join Date: May 2012
Location: WV
Posts: 681
|
so should i just tug at it alittle
__________________
PHOENIX 323HP "LEGENDS NEVER DIE" |
12-09-2012, 11:31 AM | #7 |
Drives: 2012 camaro Join Date: Feb 2012
Location: central VA
Posts: 3,196
|
|
12-09-2012, 11:45 AM | #8 |
Drives: 2012 45th anniversary Join Date: Apr 2012
Location: Currently in Corpus Christi Texas
Posts: 363
|
Yep when we did ours i used some needle nose pliers on those little silver washers and they slid off removed the matting did my wiring and reinstalled all removed parts. Just be careful not to break any of the posts off.
__________________
|
12-09-2012, 01:32 PM | #9 |
Drives: 2LS Inferno Orange "PHOENIX" Join Date: May 2012
Location: WV
Posts: 681
|
ok thx guys
__________________
PHOENIX 323HP "LEGENDS NEVER DIE" |
12-09-2012, 09:51 PM | #10 |
Drives: 2LS Inferno Orange "PHOENIX" Join Date: May 2012
Location: WV
Posts: 681
|
Well guys so far so good the firewall come off with no problem now im just tryin to find some amber lights to use that are the right size thats the only thing stopping my first underhood lighting mod
__________________
PHOENIX 323HP "LEGENDS NEVER DIE" |
12-09-2012, 10:06 PM | #11 |
Raised by Wolves
|
grab some light strips at autozone.
|
12-10-2012, 09:39 AM | #12 |
Drives: 2LS Inferno Orange "PHOENIX" Join Date: May 2012
Location: WV
Posts: 681
|
well i found some lights from superbrightleds.com im gonna use
__________________
PHOENIX 323HP "LEGENDS NEVER DIE" |
|
|
|
|