Reduced engine power. Help please. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TheGuy203 · 12-08-2021, 04:06 PM

Hey guys. 2010 Camaro LS3 W/Huron single t4 kit and BTR stage 2 turbo cam. Melted front lighting harness/engine harness. Repaired and replaced back in the car. Fuel and spark are good. Car has a real rough and rich idle and goes into limp mode at any breathe of the pedal. Gives me a p2101 and p1516. Can’t relearn the crankshaft position because procedure wants me to redline car and it won’t go above 3k and the computer is not responding to relearns to the idle or throttle body. Cleaned up the idle by a hair but something is still wrong. I’m assuming to just grab a throttle body and see however I have to consult you guys first to see if any ones dealt with a similar issue.

12-08-2021, 04:06 PM	#1
TheGuy203 Drives: 2010 Cammed Black Camaro SS Join Date: Nov 2016 Location: Connecticut Posts: 17	Reduced engine power. Help please. Hey guys. 2010 Camaro LS3 W/Huron single t4 kit and BTR stage 2 turbo cam. Melted front lighting harness/engine harness. Repaired and replaced back in the car. Fuel and spark are good. Car has a real rough and rich idle and goes into limp mode at any breathe of the pedal. Gives me a p2101 and p1516. Can’t relearn the crankshaft position because procedure wants me to redline car and it won’t go above 3k and the computer is not responding to relearns to the idle or throttle body. Cleaned up the idle by a hair but something is still wrong. I’m assuming to just grab a throttle body and see however I have to consult you guys first to see if any ones dealt with a similar issue.