06-10-2009, 01:41 PM | #15 | |
Quote:
http://www.ninosport.com/Altec-Remot...category=21817 I cannot vouch for it, but its seems like an ideal solution. Thanks, Kelly
__________________
2010 Camaro 2SS, IOM, IO Interior, RS, 6M
Came home 09-07-22 VIN# 25963 1969 Firebird 400 1978 Camaro 305 V8 1994 Firebird Formula LT1 2002 Formula Firehawk LS1 |
||
06-10-2009, 01:46 PM | #16 |
Drives: 2SS Join Date: May 2009
Location: Fort Collins
Posts: 611
|
check this out also...................http://www.ninosport.com/Altec-Remot...e-Holder-400EU
__________________
2SS/RS CGM/BLK GFX MN6418 Stroker.785rwhp/885lbtq.50 SHOT NO2..Pfadt arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.E-FORCE SC.8 rib IW 10%OD.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX MONSTER CatchCan.DSS axels/DS.Hammerhead rear, 3:73's. WYOSPEED builthttp://www.camaro5.com/forums/showthread.php?t=115687
|
06-10-2009, 02:07 PM | #17 |
|
I saw a Vette with the plate attached to the passenger sun visor and the visor was down so it was showing.
Good idea.
__________________
2010 Camaro 2LT / RS - Black w/IO interior & M6
Sporting MRT V1, Hurst short throw, and Injen long tube and loving it!!! Also, over 125,000 miles and going. |
06-10-2009, 04:28 PM | #18 |
Thank you Oshawa/St.Cats!
Drives: was 2010 2LT RS 2G1FC1EV4A9103434 Join Date: May 2009
Location: NW NJ
Posts: 3,481
|
Altec Show N Go manual version would mount at an angle given how steep the front bumper is - I know as my Service tech and I tried to figure it out today with one I ordered from Amazon. See other thread and pictures of another member who has it or something similar http://www.camaro5.com/forums/showthread.php?t=24244. I assume the automatic version would have similar issue.
I've emailed Altec seeking an alternative solution - they don't have one yet. For now I am leaving the plate in my glove box along with the "We Owe" form for the Front License Plate GM frame... I'd like to see more photos of the bracket camaropete showed and hopefully the final product is a bit more finished in the welding (unless you can't see it once mounted).
__________________
#3434 Born 4-15-2009, Delivered 5-22-2009 BBOMG 2/3/4 - Traded-in 8/31/2019:
|
06-24-2009, 07:45 PM | #19 |
Drives: 2010 camaro 2ss IOM Join Date: Jun 2009
Location: rochester ny
Posts: 767
|
front plates
How bout Nooooooo front plates ever on a camaro
|
06-24-2009, 08:11 PM | #20 |
Hello!
|
I like the one CamaroPete did up but don't like the fact that so much of the cooling is blocked...and here in Texas, where everyday seems to be 100, I need all the cooling coming in the front as possible!
|
06-24-2009, 08:38 PM | #21 |
Drives: 2010 Camaro 2SS/RS ABM Join Date: Jun 2009
Location: Westchester County, NY
Posts: 224
|
these new guys need to learn how to read a thread....i mean FOR REAL, "nal" you asked for something that was posted 2 spots above you:slice:
__________________
2SS/RS/M6 | ABM | White Stripes | Black Int
Mods: American Racing Headers & Exhaust, Airaid Intake, Pfadt Front/Rear Sway Bars, Stealth Bulbs, AAC LED bowtie, AAC Concept LED Side-markers ABM/Tinted, 20% Tints, Chuck COW Tune, MGW shifter (blue with white racing stripes). Coming Soon: 4:10 Gears? |
06-25-2009, 02:01 PM | #22 |
|
well i know that the motorized one does not flap in the wind on the road. also i am selling them for 129.95 free shipping. i have told people about them but i have yet had time to install on my car havent had it long enough its been at shops for r&d on new products. but if interested let me know contact me at andrew@sightwaves.com. going to drop the car off this monday for fitting of the motorized plate so i should have pics up tuesday.
|
06-26-2009, 08:15 PM | #23 |
I have seen a whole bunch of discussion but no one who has actually ordered/installed anything yet. I see Shevyman should have something up by Tuesday, so I will wait and review how it looks and works.
Shevyman, I would love to see pics and videos of it once you get it installed. If it all comes together as I hope, I will order one!!! Thanks!!!
__________________
Ordered 10-13-08 2SS/RS M6 BLK/GRY
VIN #2386 Delivered 6-11-09 - Woo Hoo!!! Hey Houston locals-------- Join the H-Town Camaro Club www.H-TownCamaroClub.com |
|
06-26-2009, 10:28 PM | #24 |
Considering a Camaro
Drives: Infiniti, Toyota Join Date: May 2009
Location: Austin, TX
Posts: 8
|
Julie,
In Texas, it is NOT a moving violation. So, if someone actually does write you a ticket (which is highly unlikely, but still possible) for NO FRONT PLATE, then the worst that will happen is you pay a fine. You don't get tick marks against your DL, and it doesn't go on your record because this isn't a hazardous (otherwise known as a moving) violation. Just thought you should know. |
06-26-2009, 10:29 PM | #25 |
Considering a Camaro
Drives: Infiniti, Toyota Join Date: May 2009
Location: Austin, TX
Posts: 8
|
Also, I haven't had a front plate on any of my vehicles since about 1994, and I've been pulled over zero times for it. This goes for trucks, SUVs, F-bodies, and Corvettes.
|
06-27-2009, 12:00 AM | #26 |
Drives: 2010 Camaro SS/RS 92 300zx 2001 Ram Join Date: Feb 2009
Location: Staten Island, NYC
Posts: 1,388
|
i really want a hide away plater holder...motorized to be exact but the camaros bumper isnt flat and it angles up...pointed like i guess u can say, so u see the actual bracket when its "hidden"...ruined it for me...so i ordered the plate holder trm0002 made...it screws into the existing holes under the front fascia...im assume this are the bolt that hold the bottom of the fascia to the bottom of the car...i just take out those bolts silde thebracket arms over the hole and screw in longer bolts...they 2 arms come from out the boottom of the car and u mount the originally dealer plate holder to the arms...its low and centers due to the fact that ur using the orignial plastic holder thing with the arm/bend wuteva u wanna call it...its looks good, check out the thread its somewhere on here but im too tired right now to search for it
and its only 36 buks...quick fix to hold me over till a motorized hideaway that actually hides away and looks good on the camaro is made
__________________
|
06-27-2009, 08:10 AM | #27 |
OMG Bumblebee!! UM NO!!
|
I am planning on building a bracket using clamps and nosing the factory mount to just hook into the lower grill if I get too many tickets. but for now no plate on the front of my car.
|
06-27-2009, 07:08 PM | #28 |
Drives: 2ss on order, 06 f-150 Join Date: Jun 2009
Location: Utah
Posts: 42
|
Here in Utah it is now a secondary offense, I can't stop a vehicle based on the lack of a front plate.
I don't cite for it anyways, which is good considering the fact that when my Camaro arrives, it will not have a front plate. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Not having front license plate attached by dealer | New2010CamaroLover | 5th Gen Camaro SS LS LT General Discussions | 154 | 10-07-2010 04:01 PM |
Front License Plate Bracket | blackZbandit | 5th Gen Camaro SS LS LT General Discussions | 76 | 08-17-2009 05:51 PM |
Front License Plate Holder (from Top Flight Reproductions) | Splitter | Cosmetics and Lighting Modification Discussions | 24 | 07-29-2009 07:51 AM |
Front license plate | SSCamaro2010 | Cosmetics and Lighting Modification Discussions | 21 | 04-25-2009 04:07 PM |
front license plate | myold88 | 5th Gen Camaro SS LS LT General Discussions | 26 | 02-16-2009 07:09 AM |