Replaced K&N Aircharger with CAI Inc CAI

[MagnumForceGB]

Finally got tired of my K&N, so I bought and installed a CAI Inc brand CAI. Biggest pain was getting the Roto-Fab W/W kit back in with the box there. I'll be able to see if there is a difference when I burn her through the 1/4 mile on Friday against my wife's Mustang.



Thanks to CAI Inc for making the intake, and Apex for fast shipping.

[Apex Motorsports]

Originally Posted by MagnumForceGB

Finally got tired of my K&N, so I bought and installed a CAI Inc brand CAI. Biggest pain was getting the Roto-Fab W/W kit back in with the box there. I'll be able to see if there is a difference when I burn her through the 1/4 mile on Friday against my wife's Mustang.



Thanks to CAI Inc for making the intake, and Apex for fast shipping.

Thank you for your order. It looks great!

[Lil' Nasty]

Great decision, love me some Cai inc

[ActNup NY]

Originally Posted by Franklin's Bee

Great decision, love me some Cai inc

I agree ! I have a K&N on my old beamer wasn't to impress with it.

[menendez1293]

Congrats on the upgrade I love my CAI inc CAI. In my oppinion the best system for the LLT out there

[Sales @ CAI Inc]

Originally Posted by MagnumForceGB

Finally got tired of my K&N, so I bought and installed a CAI Inc brand CAI. Biggest pain was getting the Roto-Fab W/W kit back in with the box there. I'll be able to see if there is a difference when I burn her through the 1/4 mile on Friday against my wife's Mustang.



Thanks to CAI Inc for making the intake, and Apex for fast shipping.

Thank you for choosing Cold Air Inductions Inc.! It looks great, love the Synergy Green / Black combo!!

Originally Posted by Franklin's Bee

Great decision, love me some Cai inc

Thanks!!

Originally Posted by menendez1293

Congrats on the upgrade I love my CAI inc CAI. In my oppinion the best system for the LLT out there

Thanks!!

[RickRay]

Originally Posted by Apex Chase

Thank you for your order. It looks great!

Originally Posted by Bill @ CAI Inc

Thank you for choosing Cold Air Inductions Inc.! It looks great, love the Synergy Green / Black combo!!

Thanks!!

Will one of you guys be at the C5F3 will Specials???

I just read the other thread...
See you guys at the C5F3

[Adwal99]

Originally Posted by MagnumForceGB

Finally got tired of my K&N, so I bought and installed a CAI Inc brand CAI. Biggest pain was getting the Roto-Fab W/W kit back in with the box there. I'll be able to see if there is a difference when I burn her through the 1/4 mile on Friday against my wife's Mustang.



Thanks to CAI Inc for making the intake, and Apex for fast shipping.

that looks clean as **** bro!

[Sales @ CAI Inc]

Originally Posted by RickRay

Will one of you guys be at the C5F3 will Specials???

I just read the other thread...
See you guys at the C5F3

See you there!!

[MagnumForceGB]

Hooked up my torque app while driving today and saw some interesting things. My intake temp was 2 degrees higher then the temp on the radio, but 10 degrees higher then the ECU ambient temp. Also, my LTFT's are -20 at idle and -15 at cruising speed. I'll see if they calm down after a few hundred miles, I don't want to do a datalog until I get the ported throttle body and intake manifold. I like the CAI though, seems like I gained a little bit of low end pull. I'll find out if its true tomorrow night.

I don't think I'll be able to do anything about the temps at idle unless I wrap my stainless steel headers, or buy a hood with heat extractors.

Originally Posted by Apex Chase

Thank you for your order. It looks great!

Do you guys sell the tank top that Amanda wore? My wife would like to get one.

[11 Camaro IBM]

It looks great!!, but if you cared about track times you should have gone with vararam

[MagnumForceGB]

Originally Posted by 11 Camaro IBM

It looks great!!, but if you cared about track times you should have gone with vararam

Nah, Injen would have been it then since they own 6 of the top 10 in bolt-ons fast times. I already had the scoop and W/W relocation, so might as well make use of them.

[Sales @ CAI Inc]

Originally Posted by MagnumForceGB

Hooked up my torque app while driving today and saw some interesting things. My intake temp was 2 degrees higher then the temp on the radio, but 10 degrees higher then the ECU ambient temp.

Thats awesome, a 2 degrees is great and greatness is what we strive for with our products! Sounds like there is obviously a difference with readings between the ECU and radio in terms of what temp it thinks it is. Either way, the difference in IAT would still be pretty impressive, especially considering the heat those headers are putting off! Glad to hear that you are happy and that our ceramic coated intake tube and enclosed & insulated air box is doing the job it was designed to do!

[RickRay]

Originally Posted by MagnumForceGB

Hooked up my torque app while driving today and saw some interesting things. My intake temp was 2 degrees higher then the temp on the radio, but 10 degrees higher then the ECU ambient temp. Also, my LTFT's are -20 at idle and -15 at cruising speed. I'll see if they calm down after a few hundred miles, I don't want to do a datalog until I get the ported throttle body and intake manifold. I like the CAI though, seems like I gained a little bit of low end pull. I'll find out if its true tomorrow night.

I don't think I'll be able to do anything about the temps at idle unless I wrap my stainless steel headers, or buy a hood with heat extractors.



Do you guys sell the tank top that Amanda wore? My wife would like to get one.

Like this;