What suspension mods TSW Nuburgring 9 &10" x20 on Invos - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

skar · 07-22-2012, 03:56 PM

TSW Nuburgring 9 &10" 275 & 315 Invos 20"
What suspension mods you guys recomend . Note my wheels
Stick out even with the fenders (20 & 35 off sets) they say a one drop will work
? Also sway bars and trailing arms or what ever.

ITGuy11 · 07-22-2012, 09:49 PM

I have the Pfadt stage 3 setup with my Nurbs and it handles awesome. I am running the 305 nitto dr's in back, stock rubber for now up front.

Horsepower Direct · 07-22-2012, 10:03 PM

The Hellwig adjustable sway bars are top notch .. We have them on sale

PfadtRacing · 07-23-2012, 10:20 AM

Quote:

Originally Posted by ITGuy11

I have the Pfadt stage 3 setup with my Nurbs and it handles awesome. I am running the 305 nitto dr's in back, stock rubber for now up front.

Very nice setup! Do you have any pics?

If you're looking to make your car not only look better but handle much better as well, you should take a look at one of our Camaro package upgrades. Our upgrade packages run the gamut from drop spring and sway bars, to complete street car setups, so full on drag or road course setups.

Sounds like you want to make the car look a little better and make it more fun to drive. I would suggest taking a look at our Camaro Stage2 package, it includes our 1.25" drop springs and sway bars... between the two of those upgrades these cars not only look great, but become a whole lot more fun to drive as well. If you were looking to optimize drag performance and eliminate wheel hop putting some Trailing Arms and Toe Rods on in the rear will make the car much more confident out of the hole.

We definitely have the parts to get you where you want to be! Let us know if we can help you out in any way. Our number is 1-888-972-2464, you can PM us over the forums, or you can email me directly to jarrett@pfadtracing.com.

Here is some footage we took during our Camaro Stage2 development at Miller Motorsports park. You can see how much lower the car sits, and how much flatter it corners after install.

newagemuscle · 07-23-2012, 10:28 AM

Quote:

Originally Posted by skar

TSW Nuburgring 9 &10" 275 & 315 Invos 20"
What suspension mods you guys recomend . Note my wheels
Stick out even with the fenders (20 & 35 off sets) they say a one drop will work
? Also sway bars and trailing arms or what ever.

I still need to check these 315 invos out in person on your car. I saw the 305 555r on ITguys's a couple weeks back and they looked great. If I don't go the route of a drag tire I am considering doing the same set up you have on my Nurburgrings.

skar · 07-24-2012, 02:27 PM

Quote:

Originally Posted by newagemuscle

I still need to check these 315 invos out in person on your car. I saw the 305 555r on ITguys's a couple weeks back and they looked great. If I don't go the route of a drag tire I am considering doing the same set up you have on my Nurburgrings.

Maybe Woodward

Hotchkis · 08-03-2012, 02:05 PM

I would definitely take a look at the springs that we offer. Our springs lower the Camaro by 1" all around, giving it a more aggressive stance, lower center of gravity, and better handling without compromising it usability.

Though you may be only starting with springs now, if you decide to keep modifying your suspension we have all of the parts needed to take your suspension from basic to advanced. All of our products are designed and engineered to complement each other so there is no need to worry that parts won't fit or work correctly like when you mix-'n-match.

Check out what Autoblog (http://www.autoblog.com/2010/03/12/h...r-than-before/) and Road and Track (http://www.hotchkis.net/_uploaded_fi...5thgen_zz1.pdf) think about our improvements to the 5th Gen Camaro.

07-22-2012, 03:56 PM	#1
skar Drives: 2010 2SSRS headers/CAI/tune/corsa, Join Date: May 2010 Location: Commerce twp Michigan Posts: 1,413	What suspension mods TSW Nuburgring 9 &10" x20 on Invos TSW Nuburgring 9 &10" 275 & 315 Invos 20" What suspension mods you guys recomend . Note my wheels Stick out even with the fenders (20 & 35 off sets) they say a one drop will work ? Also sway bars and trailing arms or what ever. __________________ Stainless works headers/cats Roto fab CAI / Corsa install and tune Livernois TSW Nuburgring 9 &10" x 20 on Invos (315 & 275 ) JL Audio XD400/4 amp Pfadt trailing arms & tie rods sway bars. pedders street 1 package. ,Hurst short throw shifter With bronze bushings .

07-22-2012, 09:49 PM	#2
ITGuy11 Burning up tires Drives: 2023 ZL1 Vert Join Date: Jul 2010 Location: Macomb Twp, MI Posts: 717	I have the Pfadt stage 3 setup with my Nurbs and it handles awesome. I am running the 305 nitto dr's in back, stock rubber for now up front.

07-22-2012, 10:03 PM	#3
Horsepower Direct Drives: We own a few muscle cars... Join Date: Jan 2012 Location: Madison, WI Posts: 61	The Hellwig adjustable sway bars are top notch .. We have them on sale

08-03-2012, 02:05 PM	#7
Hotchkis Drives: 1st through 5th gen Camaros Join Date: Sep 2009 Location: Sante Fe Springs, CA Posts: 458	I would definitely take a look at the springs that we offer. Our springs lower the Camaro by 1" all around, giving it a more aggressive stance, lower center of gravity, and better handling without compromising it usability. Though you may be only starting with springs now, if you decide to keep modifying your suspension we have all of the parts needed to take your suspension from basic to advanced. All of our products are designed and engineered to complement each other so there is no need to worry that parts won't fit or work correctly like when you mix-'n-match. Check out what Autoblog (http://www.autoblog.com/2010/03/12/h...r-than-before/) and Road and Track (http://www.hotchkis.net/_uploaded_fi...5thgen_zz1.pdf) think about our improvements to the 5th Gen Camaro.