01-19-2011, 02:01 PM | #225 |
BLESSEDCHEF10
|
thanks!
__________________
|
01-25-2011, 07:06 PM | #226 |
Drives: 2017 ZL1 Status "Thank You!" Join Date: Feb 2009
Location: SC
Posts: 2,498
|
YOU SAID: Milk 1027;367718] ""I want to get all the known performance products for V6 in one thread to keep organized and make them easier to find.""
MILK I just came on this thread......... VERY NICE. My timing is off since it is now January 2011 and the new models will have an improved 6 cyl, but hopefully this info will remain available for a long time to come. I have not purchased my Camaro yet. I have been waiting for a Z/28, but have considered getting a 6 cyl as a daily driver! And, mods to it would be very nice. Especially the sound improvement and suspension departments! Thanks for the time you take to do this. |
02-01-2011, 02:07 AM | #227 |
R2C Performance Cold Air Intake System for 2010 Camaro SS and RS
I just recently put a cold air intake on my 2010 V6 Camaro. This being my first engine modification, I was very excited to throw it on. R2C uses a 14 inch cone that really looks bad ass when you pop the hood. It sounds really tight and requires zero lifetime maintenance. The first time I drove it I was shocked with the throttle response time and my gas mileage has actually gone up. Shocking due to the fact I get on it every chance I get. Their dyno tests report an average of 14+ HP and 17+ for the SS which would only increase if you had a cat-back system. I am very happy and impressed with the system.
http://www.r2cperformance.com or http://www.r2cperformance.com/2010-c...ke-system.aspx |
|
02-25-2011, 11:42 AM | #228 | |
How much
How much? The website does not say?
Quote:
|
||
04-12-2011, 01:42 PM | #229 |
EMERALD COAST CAMAROS
Drives: Malibu.camaro/ Join Date: Nov 2008
Location: lynn haven fl.
Posts: 102
|
hi was thinking about getting a set of headers for my v6 I have mrt 2.0 and cai I was wondering if i bought shorty headers if i need to buy extensions or any thing . same question for long headers
|
05-24-2011, 04:29 PM | #230 |
der Hammer
Drives: 2010 Chevrolet Camaro RS/2LT Join Date: Apr 2010
Location: Morris County, New Jersey
Posts: 6
|
Here's one for the BBK CAI. Very easy and simple to install.
__________________
2010 Camaro RS/2LT | BBK full-length headers w/ catalytic converters | BBK cold air induction | SLP PowerFlow exhaust
|
06-20-2011, 09:02 AM | #231 |
|
Well you might. I swapped out my entire exhaust system with a set of Stainless Works LT/HF cats and SOLO Mach LLT exhaust and my tips were sticking way out the backend probably 4-5 inches. I think that system is designed to bolt up to stock exhaust manifolds and the stock catalitic converter downpipes as most prolly are. I had to take my car to a muffler shop and have them shorten the exhaust a bit.
__________________
IPF supercharger kit, IPF tune, SW LT's, R. Tech HFC's, ARK DT-S catback, SS Brembo brake upgrade, BC Racing adjustable coilovers, Hurst STS, Pfadt rear arm package, Pfadt adjustable sways & end links, Pfadt diff bushings, BMR rear cradle full kit blk bezels,SS diffuser, Innovate gauges.
|
06-27-2011, 09:31 AM | #232 |
Two Questions. First I was thinking about the Borla system, are you skeptical about it's true performance and which one is the best? Two Cold Air induction, I was reading about CAI. inc they say their the best for 2011 lt v6 what say you?
|
|
06-27-2011, 09:45 AM | #233 | |
having FUN now 13.66@101
|
Quote:
INJEN. for many reasons. Vararam, Roto-Fab, and CAI were not available at the time. The testing that was done shows it is at the top for performance. The V6 1/4 mile list shows INJEN's are on the top 5 list.
__________________
|
|
06-27-2011, 06:50 PM | #234 |
Caffeinated Gearhead
|
Okay, so I'm VERY new to performance mods on my Camaro...
I'm interested in a decently priced performance enhancer for my V6 RS. I'm not very familiar with terminology or details about motors, as I'm more of a guy who drives it because he loves American muscle! Where should I start? What should I get? Does installing any of these void the GM warranty? Thx in advance! |
07-06-2011, 02:51 PM | #235 | |
Drives: 2011 Camaro LT1 RS, Cyber Metalic Join Date: Jun 2011
Location: Dallas, TX
Posts: 4
|
Quote:
Injen CAI is the safest bet (Amsoil EaO filter which is great), and I've yet to go forward with installing Solo Mach X-LLT, though may once I get comfortable with how things are back at stock headers. I can actually say that just the CAI and remaining exhaust system up to the headers is probably safe to do. Anything extreme (headers could cause serious problems if not done properly, and the stock ones have integrated heat shields that are designed for the cars engine bay.) Though you can buy the headers I have for $600 if you want? . . . Phastek doesn't want used returns. |
|
07-13-2011, 01:18 PM | #236 |
Death Before Dishonor
|
Here is a link for a Volant Air Intake. From what I am reading it's better than the gauze filters. http://www.volant.com/edetail.asp?ID=759
|
07-19-2011, 04:03 PM | #237 |
Drives: 2010 Camaro V6 Yellow and black Join Date: Jun 2011
Location: Asheboro NC
Posts: 23
|
wanting to add cai and axle back exhaust....which should i do first
|
08-02-2011, 11:48 AM | #238 |
Drives: 2011 RS V6 Join Date: Aug 2011
Location: Lansdale
Posts: 6
|
DOES NOT VOID WARRANTY IF SLP INSTALLS!!!
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Camaro Laws | ChevyNut | Off-topic Discussions | 107 | 11-09-2016 05:40 PM |
Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 07:05 PM |
Fesler-Moss Camaro Announced | swchopper | 5th Gen Camaro SS LS LT General Discussions | 72 | 05-07-2009 09:40 AM |
Camaro Accessories from SEMA | FenwickHockey65 | 5th Gen Camaro SS LS LT General Discussions | 1 | 11-03-2008 02:25 PM |
Q&A with fbodfather (Scott Settlemire) regarding upcoming Camaro | JustinZS | 5th Gen Camaro SS LS LT General Discussions | 22 | 05-20-2008 07:48 PM |