Bumblebee-LIKE cheap bumper look a like - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mjbreese · 05-23-2011, 11:04 PM

Quote:

Originally Posted by STINGS

Not sure if this helps, but here is a picture of the trace of the port for a V6 bumper, with some measurements. If this isn't enough info, you can pm a mailing address and I can send it to you.

Joe

thanks joe... that helps a lot! i should be good with the measurements

mjbreese · 05-24-2011, 11:29 PM

awesome thanks a lot! ill definitely see if i can throw something together before i spend big bucks on the ports.

and for everyone looking for what i originally stated (cheap bumblebee cover)
http://youtu.be/3lZzFg6T-yc

i finally found it!!! made by american car craft... after contacting them, though, i was pretty disappointed to hear it cost 100 and shipping. I guess this is not so cheap at all. mine as well get t3 ports

whiteknight012 · 05-27-2011, 08:34 AM

You guys asked for it...my CGM with finished T2 ports!

I gotta say...I like the way it turned out!

Now I need to ask Hazman for a new Sig!

ajt · 05-27-2011, 08:56 AM

Quote:

Originally Posted by whiteknight012

You guys asked for it...my CGM with finished T2 ports!

I gotta say...I like the way it turned out!

Now I need to ask Hazman for a new Sig!

That looks amazing even without the splitter. Beautiful CGM

whiteknight012 · 05-27-2011, 10:37 AM

Quote:

Originally Posted by ajt

That looks amazing even without the splitter. Beautiful CGM

Thanks so much! I like it more every time I see it!

CiscoBee · 05-27-2011, 02:49 PM

Looking good!!!!!

dma05 · 05-27-2011, 06:38 PM

Whiteknight: Are those the factory DRL's on there as well? Is it easy to keep them with the T2 ports installed... Im looking to do this same mod (I have a CGM as well) and wanted to keep my factory DRLs...

thanks,
Allen

Vengeance Graphix · 05-27-2011, 06:55 PM

That came out looking great with CGM

CiscoBee · 05-27-2011, 11:12 PM

Quote:

Originally Posted by dma05

Whiteknight: Are those the factory DRL's on there as well? Is it easy to keep them with the T2 ports installed... Im looking to do this same mod (I have a CGM as well) and wanted to keep my factory DRLs...

thanks,
Allen

They sell a bracket to mount the factory DRL's (from ACS composites).

whiteknight012 · 05-27-2011, 11:19 PM

Quote:

Originally Posted by CiscoBee

Looking good!!!!!

Thanks!

Quote:

Originally Posted by dma05

Whiteknight: Are those the factory DRL's on there as well? Is it easy to keep them with the T2 ports installed... Im looking to do this same mod (I have a CGM as well) and wanted to keep my factory DRLs...

thanks,
Allen

Yeah it's still the factory DRL's. I think eventually I'll look into possibly changing them, but it looks even better than I thought it would so it's a low priority at this point.

Quote:

Originally Posted by CiscoBee

They sell a bracket to mount the factory DRL's (from ACS composites).

Exactly right. I got my ports at Camaro5 Fest II and talked to Joseph from ACS, and he shipped me the mounting brackets when I got home. I definitely recommend ACS...great people to work with.

Quote:

Originally Posted by xVengeancex28

That came out looking great with CGM

Thank you!!

sangerbanger58 · 05-27-2011, 11:43 PM

WhiteKnight012 here are some pic's i took of ur Camaro

tjk_art · 05-28-2011, 02:58 PM

Can you buy the splitter separately after?

Is it cheaper to buy them separate and have them installed or just buy the full fascia?

1meanss · 05-28-2011, 11:07 PM

hey there, the t2s look great! where can i get a set of these with hardware and install instructions? please pm me

whiteknight012 · 05-29-2011, 09:58 AM

Quote:

Originally Posted by tjk_art

Can you buy the splitter separately after?

Is it cheaper to buy them separate and have them installed or just buy the full fascia?

Yeah the splitter can be purchased separately. From what the guy at ACS told me it's a lot more expensive to just buy the whole new fascia, and I imagine it would be kind of a pain to color-match the rest of the car and get it right!

Quote:

Originally Posted by 1meanss

hey there, the t2s look great! where can i get a set of these with hardware and install instructions? please pm me

Thanks! PM sent.

05-27-2011, 08:34 AM	#31
whiteknight012 Drives: 2011 CAMARO RS (1LT) CGM/BLK Join Date: Jun 2010 Location: Fresno, CA Posts: 564 View My Garage	You guys asked for it...my CGM with finished T2 ports! I gotta say...I like the way it turned out! Now I need to ask Hazman for a new Sig! __________________ "Celeste" - 2011 1LT/RS CGM/BLK -A member of CVC- Central Valley Camaros [Build]http://www.camaro5.com/forums/showthread.php?t=237634

05-27-2011, 06:38 PM	#35
dma05 Drives: 2011 Camaro 2SS/RS Join Date: Jan 2011 Location: Azusa, CA Posts: 360	Whiteknight: Are those the factory DRL's on there as well? Is it easy to keep them with the T2 ports installed... Im looking to do this same mod (I have a CGM as well) and wanted to keep my factory DRLs... thanks, Allen __________________ Allen 2011 Camaro 2SS/RS

05-27-2011, 06:55 PM	#36
Vengeance Graphix Drives: 2017 Corvette Grand Sport Join Date: May 2010 Location: Central NJ Posts: 10,870	That came out looking great with CGM __________________ Vengeance Graphix

05-27-2011, 11:43 PM	#39
sangerbanger58 Drives: 2010 IBM Camaro 1LT/RS Join Date: Feb 2010 Location: Sanger,CA Posts: 1,834	WhiteKnight012 here are some pic's i took of ur Camaro Attached Images __________________ *CVC Fresno*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTT: MY V6 Bumper for SS Bumper	HBMike	Exterior Parts & Accessories	0	09-30-2010 06:52 PM
SS Prototype Bumper or Original Bumper (Bumpergate has begun)	Fandango	Cosmetics and Lighting Modification Discussions	68	08-26-2010 01:06 AM
Bumblebee bumper??	Jlpinc4y	Cosmetics and Lighting Modification Discussions	15	03-26-2010 11:32 AM
Whats better looking, the RS or SS bumper?	ihc95	5th Gen Camaro SS LS LT General Discussions	158	03-23-2009 04:32 PM

05-24-2011, 11:29 PM	#30
mjbreese Drives: 2010 Camaro- Veronica Join Date: Dec 2010 Location: East Hanover, NJ Posts: 67 View My Garage	awesome thanks a lot! ill definitely see if i can throw something together before i spend big bucks on the ports. and for everyone looking for what i originally stated (cheap bumblebee cover) http://youtu.be/3lZzFg6T-yc i finally found it!!! made by american car craft... after contacting them, though, i was pretty disappointed to hear it cost 100 and shipping. I guess this is not so cheap at all. mine as well get t3 ports

05-27-2011, 02:49 PM	#34
CiscoBee Account Suspended Drives: 2010 Camaro Rally Yellow 2LT Join Date: Aug 2009 Location: Smithtown, NY Posts: 689 View My Garage	Looking good!!!!!

05-28-2011, 02:58 PM	#40
tjk_art Drives: 2010 Join Date: May 2010 Location: US Posts: 1,661	Can you buy the splitter separately after? Is it cheaper to buy them separate and have them installed or just buy the full fascia?

05-28-2011, 11:07 PM	#41
1meanss Drives: 2010 Black Camaro SS/RS Join Date: Oct 2009 Location: NW Indiana Posts: 173	hey there, the t2s look great! where can i get a set of these with hardware and install instructions? please pm me