Lashway rear diff swap - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Stalkker66 · 11-13-2012, 11:39 AM

Hey guys, just got lashway rear diff assembly and i am probably going to swap it out this weekend. Just seeing if anyone has swaped already or has good directions with pics? I'm sure i can handle it without but easier with directions and pics.

Thanks,
Jeff

Mr_Draco · 11-13-2012, 04:40 PM

This guide actually is about just changing the bushings but it also tells you how to remove the diff so the first part will still apply to you..

http://www.pfadtracing.com/blog/wp-c...ation-reva.pdf

Stalkker66 · 11-13-2012, 09:51 PM

Awesome! Thanks man. Looks like my Saturday will be fun!!!

LS3 Handler · 11-03-2013, 11:02 PM

I see in the intructions that you have to pop the half shafts out and they have retention rings. What is the best way to pop them out. Also i hear some bolts that are removed are torque to yield and need to be replaced. Which ones need to be replaced?

11-13-2012, 11:39 AM	#1
Stalkker66 Drives: 2012 Imperial Blue Metallic Join Date: May 2012 Location: derry nh Posts: 82 View My Garage	Lashway rear diff swap Hey guys, just got lashway rear diff assembly and i am probably going to swap it out this weekend. Just seeing if anyone has swaped already or has good directions with pics? I'm sure i can handle it without but easier with directions and pics. Thanks, Jeff

11-13-2012, 04:40 PM	#2
Mr_Draco Drives: 2SS/RS Join Date: Sep 2008 Location: Western North Carolina Posts: 7,177	This guide actually is about just changing the bushings but it also tells you how to remove the diff so the first part will still apply to you.. http://www.pfadtracing.com/blog/wp-c...ation-reva.pdf

11-13-2012, 09:51 PM	#3
Stalkker66 Drives: 2012 Imperial Blue Metallic Join Date: May 2012 Location: derry nh Posts: 82 View My Garage	Awesome! Thanks man. Looks like my Saturday will be fun!!!

11-03-2013, 11:02 PM	#4
LS3 Handler I love the LS3 Drives: 2010 IOM 2SS Manual Join Date: Dec 2012 Location: Washington NC Posts: 361	I see in the intructions that you have to pop the half shafts out and they have retention rings. What is the best way to pop them out. Also i hear some bolts that are removed are torque to yield and need to be replaced. Which ones need to be replaced?