Stock V6 ETs about 14.5sec...what if.... - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Beauwulf · 02-24-2011, 06:57 PM

Quote:

Originally Posted by rtcat600man

Really. I thought people had found that it ran rich.......

Auto and 19's

Are you using a dyno to verify the numbers when playing with the fuel mixture............becasue the GREAT one (SCRMNG) found thru his research and PLENTY of dyno time that this engine like to run rich, and hot but ingeste cold air. It does not react like any other engine that has been played with.

Be careful.

Hey RT... what is the height of your tire wheel combo?

rtcat600man · 02-24-2011, 07:21 PM

Quote:

Originally Posted by Beauwulf

Hey RT... what is the height of your tire wheel combo?

Stock 19's 245/50/19 = 28.64" dia.

KMPrenger · 02-24-2011, 07:26 PM

Quote:

Originally Posted by DarkneSS

rtcat your car is auto correct? and those are 19s or 20s?

Btw after today I can tell you that the stock fuel map seems to be kind of conservative, not much backfire at all. The car runs lean.

Hrrmmm...its been a common understanding here that the LLT likes to run rich.

Beauwulf · 02-24-2011, 07:53 PM

I thought the OE19s were just a bit taller than the 20s. Do you know how tall GTOs DRs are?

67 GTO · 02-24-2011, 08:03 PM

Quote:

Originally Posted by Beauwulf

I thought the OE19s were just a bit taller than the 20s. Do you know how tall GTOs DRs are?

Hey Terry, congrats on the COTW. My Nitto DRs are 27.72 tall. Ahout .9 shorter than the 19" stock 2LT tires.

Beauwulf · 02-24-2011, 08:22 PM

Quote:

Originally Posted by 67 GTO

Hey Terry, congrats on the COTW. My Nitto DRs are 27.72 tall. Ahout .9 shorter than the 19" stock 2LT tires.

Thanks my friend!

Hmmm mine are an inch shorter than yours at 26.7". If I get some good air I'll have to go after a better position on the fast list! hehe! Been I while since I was on top....

67 GTO · 02-24-2011, 08:37 PM

Quote:

Originally Posted by Beauwulf

Thanks my friend!

Hmmm mine are an inch shorter than yours at 26.7". If I get some good air I'll have to go after a better position on the fast list! hehe! Been I while since I was on top....

I know you'll be in the mix for sure. Your car is built for all kinds of racing.

I only know a straight line.

Beauwulf · 02-24-2011, 09:06 PM

Quote:

Originally Posted by 67 GTO

I know you'll be in the mix for sure. Your car is built for all kinds of racing.

I only know a straight line.

Sorry to the OP for the jack... just one more... I promise.

I built one pretty much just like this in the 70s. My only real straight line car...

DarkneSS · 02-24-2011, 11:47 PM

Ah guess Im wrong then. My car barely backfires but I guess that doesnt necessarily mean its running lean. The dyno will tell.

Actually had a set back and ruined one of the parts I ordered =[ Eta is now about two weeks until I'll post up my short list of mods and hopefully some nice dyno charts.

TJ91 · 02-25-2011, 02:04 AM

so whats the fastest m6 time on the track?
To be quite honest, Ive never been down a track. I missed the last track meet, but im pretty nervous about going down the track :(. Seen to many vids of people loosing it with stock cars.
If anyone knows, whats the best rpm to launch the m6v6 to minimize wheel spin?

shrinkdoc · 02-01-2014, 03:19 AM

Quote:

Originally Posted by CamaroFreako

rtcat600man with just intake and axleback and springs were able to reach 13.7

I think that pretty decent improvement

Yeh...thats about my times too. One day after the warranty I will go with a tune, headers and ported intake.

02-24-2011, 07:53 PM	#60
Beauwulf Drives: '10 LT RS A6 & '04 Acura RSX Type S Join Date: Oct 2009 Location: Florida Posts: 1,529	I thought the OE19s were just a bit taller than the 20s. Do you know how tall GTOs DRs are? __________________

02-25-2011, 02:04 AM	#66
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,033	so whats the fastest m6 time on the track? To be quite honest, Ive never been down a track. I missed the last track meet, but im pretty nervous about going down the track :(. Seen to many vids of people loosing it with stock cars. If anyone knows, whats the best rpm to launch the m6v6 to minimize wheel spin? __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DEALS: Magnaflow Exhausts for V6 and V6 Camaros - IN STOCK!	MJM Distributing	V6 Bolt-Ons & Tunes	40	03-28-2015 05:28 PM
LLT V6 stock flowrates....simply sad!	bmwdon	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	304	09-13-2011 01:39 PM
stock fit classic shift knobs for v8 and v6 models in stock right now!!!!!	MGW	Transmission / Driveline	32	05-04-2011 08:53 PM
Wanted: stock v6 headers	Pt_killa	V6 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	1	01-14-2011 03:24 PM
MGW SHIFT KNOB FOR STOCK V8 AND V6 SHIFTERS NOW READY>>>	MGW	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	15	12-22-2010 03:01 PM

02-24-2011, 11:47 PM	#65
DarkneSS Account Suspended Drives: 2010 Camaro 2SS/RS 6MT Join Date: Apr 2010 Location: Westchester, New York Posts: 3,715	Ah guess Im wrong then. My car barely backfires but I guess that doesnt necessarily mean its running lean. The dyno will tell. Actually had a set back and ruined one of the parts I ordered =[ Eta is now about two weeks until I'll post up my short list of mods and hopefully some nice dyno charts.