Looking to build a Twin Turbo Camaro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RR · 11-08-2012, 12:09 PM

I have a 2010 camaro with full bolt-ons including a full pedders race suspension and i am now looking at forced induction and i decided on twin turbos. Now my question is what do i need to support around 1100 horsepower to the wheels on 93 octane? I need recommendations on a new engine to support that type of horsepower, what kind of internals, turbo size, etc.

Unreal · 11-08-2012, 01:34 PM

6 bolt, sleeved or iron block.

Twin 67s should do it, or around there. Fuel system, drivetrain, etc.

kpwalls06 · 11-08-2012, 01:50 PM

My advice is to talk to a builder or shop that's been there before. Ted Jannetty is a reputable builder in the Northeast, maybe talk to him about it. Do you want a kit, or custom fab setup? Price is a big decider on that.

Z_Rocks · 11-08-2012, 06:47 PM

This built done right will cost you north of $40K. If you ready to spend and have enough to replace broken parts, then I say talk to reputable builder. With HP, you'll break things fast.
Good luck!

IPS Brandon · 11-08-2012, 08:09 PM

Call me at the shop 740-657-3278, I will chat your ear off about all you want to know.

We are the best at these set ups'

Z_Rocks · 11-09-2012, 12:21 PM

Quote:

Originally Posted by IPS Brandon

Call me at the shop 740-657-3278, I will chat your ear off about all you want to know.

We are the best at these set ups'

Agreed 100%! And they do excellent work, but not cheap. I guess, you get what you pay for.

realsquash · 11-10-2012, 08:25 AM

You need a Squash fuel system

Andy

11-08-2012, 12:09 PM	#1
RR Nie Drives: Camaro 2SS/RS Join Date: Aug 2009 Location: NY Posts: 272	Looking to build a Twin Turbo Camaro I have a 2010 camaro with full bolt-ons including a full pedders race suspension and i am now looking at forced induction and i decided on twin turbos. Now my question is what do i need to support around 1100 horsepower to the wheels on 93 octane? I need recommendations on a new engine to support that type of horsepower, what kind of internals, turbo size, etc. __________________ 1100-6/15/09

11-08-2012, 01:34 PM	#2
Unreal Drives: 2006 Z06 Join Date: Oct 2010 Location: Gilbert, AZ Posts: 5,712	6 bolt, sleeved or iron block. Twin 67s should do it, or around there. Fuel system, drivetrain, etc. __________________ Nick Corvette Z06 -1200ish rwhp

11-10-2012, 08:25 AM	#7
realsquash Drives: Four Door Camaro Join Date: Apr 2010 Location: SE WI Posts: 189	You need a Squash fuel system Andy __________________ Squash Performance LLC 2010+ Camaro 800 LPH fuel systems

11-08-2012, 01:50 PM	#3
kpwalls06 Cory Drives: 2010 Camaro 2SS/RS M6; Join Date: Nov 2009 Location: Carrollton, Tx Posts: 299 View My Garage	My advice is to talk to a builder or shop that's been there before. Ted Jannetty is a reputable builder in the Northeast, maybe talk to him about it. Do you want a kit, or custom fab setup? Price is a big decider on that.

11-08-2012, 06:47 PM	#4
Z_Rocks Drives: everyone crazy... Join Date: May 2009 Location: SW Florida Posts: 2,109	This built done right will cost you north of $40K. If you ready to spend and have enough to replace broken parts, then I say talk to reputable builder. With HP, you'll break things fast. Good luck!

11-08-2012, 08:09 PM	#5
IPS Brandon Drives: 2010 Camaro SS black Join Date: Aug 2009 Location: Columbus Ohio Posts: 907	Call me at the shop 740-657-3278, I will chat your ear off about all you want to know. We are the best at these set ups'