Utah Camaros!

[Unreal]

Traction. 111mph traps is enough for 12.2s or faster. Doesn't need any more power to run those times, just needs to hook up. Friend of mine ran 12.3@109 and another ran 11.5@115 with a decent hooking car.

I should have said 12.2s without adding any more power. 326rwhp is enough to probably touch high 11s setup properly.

[My 5th]

Originally Posted by SSOOCH

Sunday and Monday. I'm not running. Just spectating. There's something wrong with My Camaro. After I'm up to temps I have a weird vibration at low speeds when accelerating. Not sure, it almost sounds like a metal on metal high pitched vibration. Hopefully it's just an exhaust thing. I've heard of peoples heat shields coming loose but it's weird that it's only under light acceleration. If something was rubbing against the drive shaft you would think the noise would be anytime I'm accelerating...

I need to take it to the dealer. Not sure if they'll look at it with My bolt on mods though.

Stupid POS Camaro!

Rick, I've had my car into Gus Paulos a couple of times. They will look at it mods or no, but will charge you for it if it's not covered under warranty. I think they like to see Camaros with mods, breaks up the monotony of all stock, all the time.

[SixGracing]

Originally Posted by Unreal

Traction. 111mph traps is enough for 12.2s or faster. Doesn't need any more power to run those times, just needs to hook up. Friend of mine ran 12.3@109 and another ran 11.5@115 with a decent hooking car.

I should have said 12.2s without adding any more power. 326rwhp is enough to probably touch high 11s setup properly.

I hear ya, that's what I'm up against as well. I've past the traps once at 113, once at 112 and consistently at 111 but running high 12's. I know when I get the drag radials, and get the 3.45 gears just installed dialed in, I'll be in the low 12's. The goal is high 11's before I SC the car in the fall.

[Unreal]

If you want a blower do an ECS kit with the right size pulley/restrictor, make 600rwhp uncorrected, and go lay down some awesome times.

That being said at elevation and with the number of good kits out, I would do a turbo setup.

[SSOOCH]

Originally Posted by My 5th

Rick, I've had my car into Gus Paulos a couple of times. They will look at it mods or no, but will charge you for it if it's not covered under warranty. I think they like to see Camaros with mods, breaks up the monotony of all stock, all the time.

Thanks!

[SixGracing]

Originally Posted by Unreal

If you want a blower do an ECS kit with the right size pulley/restrictor, make 600rwhp uncorrected, and go lay down some awesome times.

That being said at elevation and with the number of good kits out, I would do a turbo setup.

Not real big on turbos. I Hear turbo and I picture ricers. I've been doing research on a Procharger setup for over a year now and about 99% certain that's the way I'm going. I don't like the look of the ECS chargers. They look like an Army surplus charger.. Big and bulky. With a smaller pulley, a wastegate to control the boost pressures up high, my car will put down over 600 at the wheels with this setup. There are several that already are. If I can run anywhere in the 10's, I'll be happy.

[sheslc4]

Originally Posted by sheslc4

Our next event will be June 2nd.
Looking forward to another great day of cars, friends and fun!
9am - 11am Cars & Coffee 673 W S Jordan Parkway (106th So)
11am - 2pm Alpine Loop Cruise
2pm BBQ hosted by David & Brook
BYOM and a side dish to share

RSVP utahcamaros@gmail.com
to receive directions to BBQ

The weather is looking good for the cruise and BBQ!!

[thebrainhart]

Several of us are going out to Miller Motorsports Park next weekend (June 8-10) for the PCA Full Track Event!
If you have some prior experience on both tracks (East and West), then you are able to join in the fun and action!
You can sign up for 1, 2, or all 3 days.
Instructors are available at no additional cost!
This is the cheapest event you will find for a wide open full track at Miller.

Registration closes Mon Jun 4, 2012 at 11:59PM

Info and registration:
http://www.motorsportreg.com/index.c...BF67D118E93946

Tentative Schedule:
http://www.irpca.org/resources/DE_Schedule.pdf

[geminidreams]

I will be in New York and Jersey from June 9th to the 20th. So I wont get to see you all run but I know you will have a blast..

Looking forward to the cruise tomorrow and the bbq..

[sheslc4]

Mirror Lake Cruise and Picnic July 7th

Bring a picnic lunch, your hiking shoes
and your cameras.

We will leave from Cars and Coffee
673 W S Jordan Parkway (106th South)
at 10 am and cruise to the recreational area
at Mirror Lake for lunch and to enjoy this
beautiful area.

Hope to see you there!

[sheslc4]

CAMARO5 Fest III
August 2-4, 2012
Lucas Oil Raceway, Indianapolis
We are tentatively planning a departure date of July 31st from Salt Lake.
Anyone that is planning on or wants to make this trip and would like to cruise with our group,
please contact us at utahcamaros@gmail.com . We will keep you updated with meet up
times and places.

[JDP Motorsports]

Originally Posted by sheslc4

Mirror Lake Cruise and Picnic July 7th

Bring a picnic lunch, your hiking shoes
and your cameras.

We will leave from Cars and Coffee
673 W S Jordan Parkway (106th South)
at 10 am and cruise to the recreational area
at Mirror Lake for lunch and to enjoy this
beautiful area.

Hope to see you there!

We'll be there!!! Looking forward to a fun trip!!!

Originally Posted by sheslc4

CAMARO5 Fest III
August 2-4, 2012
Lucas Oil Raceway, Indianapolis
We are tentatively planning a departure date of July 31st from Salt Lake.
Anyone that is planning on or wants to make this trip and would like to cruise with our group,
please contact us at utahcamaros@gmail.com . We will keep you updated with meet up
times and places.

I can't believe how quickly it is approaching!!!

It looks like we're going to roll out with the caravan this year!!

Kind regards,

Jordan Priestley
888.308.6007

[Slowkray]

Just installed my heritage grill. Best father's day present ever!
Before, during, and after.

[JDP Motorsports]

SWEET!!! It looks excellent, Sir!