Davenport Motorsports, the building of a Supercar series Camaro! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Davenport · 12-08-2011, 03:50 PM

Follow along and view a photo diary of the build of our 1st "Supercar" series Camaro.

This particular car will be getting a stroker, forged LS3 to 427 ci. TVS 2300 Supercharger, upgraded camshaft, cylinder heads, long tube headers, high flow cats, Pfadt suspension, Baer Brakes, HRE wheels, Nitto Tires and a host of body and interior upgrades.

We started with a brand new 45th Aniv, 6 spd manual vert.

Baseline dyno'd it, and then....

We tore it apart!

Fuel tank with new Lingenfelter twin fuel pumps installed.

Rear subframe out ready to get fortified with Pfadt.

As will all high horsepower Camaro's that we build, Pfadt Aluminum subframe bushings are being installed.

As well as Pfadts differential mounts.

DSS 1400 hp axle, compared to stock.

More Pfadt goodness.

More pic's to come as the build continues.

Davenport · 12-08-2011, 04:44 PM

Private Label Baer brakes.

15" two piece rotors with 6 Piston forged Monoblock Calipers.

HRE P45S', 20" X 9" front, 20" X 11" rear, 275 Invo's on the front and 315 Invo's on the rear.

RED DEMON SS · 12-08-2011, 04:47 PM

Wow already looking good, also pm me if you want to sell the stock Calipers?

AngelSpeedFreak · 12-08-2011, 05:10 PM

very nice... there is something about stock part sitting on the floor that just gets me excited....

The Stig · 12-08-2011, 05:15 PM

looking good

Merc · 12-08-2011, 05:24 PM

Nice!

Davenport · 12-08-2011, 05:28 PM

Quote:

Originally Posted by farthestnorth

Wow already looking good, also pm me if you want to sell the stock Calipers?

This car is going back to the dealership, to be sold, when we're done. Whoever the lucky new owner is will get to choose whether they want all the stock parts with the car.

Quote:

Originally Posted by AngelSpeedFreak

very nice... there is something about stock part sitting on the floor that just gets me excited....

Us too!

Quote:

Originally Posted by stieger

looking good

Thanks!

The Stig · 12-08-2011, 05:41 PM

Quote:

Originally Posted by Davenport

This car is going back to the dealership, to be sold, when we're done. Whoever the lucky new owner is will get to choose whether they want all the stock parts with the car.

Us too!

Thanks!

Would this void my warranty?

Davenport · 12-08-2011, 06:02 PM

Quote:

Originally Posted by stieger

Would this void my warranty?

We're going to include a warranty on the engine and all the parts that we install.

5thGenCamaroKid · 12-08-2011, 08:47 PM

Looking good!

You guys sleeving the LS3 block for the FI 427?

The Stig · 12-08-2011, 09:01 PM

Quote:

Originally Posted by Davenport

We're going to include a warranty on the engine and all the parts that we install.

Oh no I'm sure. I was just being a smart ass is all. Glad to see that you guys are warrantying your work though.

Davenport · 12-09-2011, 09:33 AM

Quote:

Originally Posted by 5thGenCamaroKid

Looking good!

You guys sleeving the LS3 block for the FI 427?

Thanks!

We're using a 4.1" stroke and a 4.070 bore, so no need to sleeve it.

Quote:

Originally Posted by stieger

Oh no I'm sure. I was just being a smart ass is all. Glad to see that you guys are warrantying your work though.

I figured you were joking around.

Thanks for following the thread!

PfadtRacing · 12-09-2011, 11:53 AM

Great build Davenport! I hope the future owner can appreciate the effort and part selection that went into this car. It's going to be a riot to drive when it's finished!

Those HRE's look awesome!

Davenport · 12-09-2011, 02:19 PM

Quote:

Originally Posted by PfadtRacing

Great build Davenport! I hope the future owner can appreciate the effort and part selection that went into this car. It's going to be a riot to drive when it's finished!

Those HRE's look awesome!

Thanks! Here's a little more love for you guys.

Not the greatest shot in the world of your sway bar, but it was the best i could do from underneath the car.

He had HRE request the color code from Baer, so the pinstripe would match the calipers. Turned out really good!

More photo's coming, stay tuned!

12-08-2011, 03:50 PM	#1
Davenport Drives: 2016 with, Magnuson Heartbeat, FF15 Join Date: Sep 2009 Location: Calgary, Alberta Canada Posts: 304	Davenport Motorsports, the building of a Supercar series Camaro! Follow along and view a photo diary of the build of our 1st "Supercar" series Camaro. This particular car will be getting a stroker, forged LS3 to 427 ci. TVS 2300 Supercharger, upgraded camshaft, cylinder heads, long tube headers, high flow cats, Pfadt suspension, Baer Brakes, HRE wheels, Nitto Tires and a host of body and interior upgrades. We started with a brand new 45th Aniv, 6 spd manual vert. Baseline dyno'd it, and then.... We tore it apart! Fuel tank with new Lingenfelter twin fuel pumps installed. Rear subframe out ready to get fortified with Pfadt. As will all high horsepower Camaro's that we build, Pfadt Aluminum subframe bushings are being installed. As well as Pfadts differential mounts. DSS 1400 hp axle, compared to stock. More Pfadt goodness. More pic's to come as the build continues.

12-08-2011, 04:47 PM	#3
RED DEMON SS OFF THE CHAIN Drives: PSHHH UWISH Join Date: Sep 2011 Location: This Side Of Hell Posts: 8,406 View My Garage	Wow already looking good, also pm me if you want to sell the stock Calipers? __________________

12-08-2011, 05:10 PM	#4
AngelSpeedFreak Most hated in NM.... Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011 Location: New Mexico Posts: 2,904	very nice... there is something about stock part sitting on the floor that just gets me excited.... __________________

12-08-2011, 05:15 PM	#5
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	looking good __________________

12-08-2011, 05:24 PM	#6
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,291	Nice! __________________ My Build Thread

12-08-2011, 04:44 PM	#2
Davenport Drives: 2016 with, Magnuson Heartbeat, FF15 Join Date: Sep 2009 Location: Calgary, Alberta Canada Posts: 304	Private Label Baer brakes. 15" two piece rotors with 6 Piston forged Monoblock Calipers. HRE P45S', 20" X 9" front, 20" X 11" rear, 275 Invo's on the front and 315 Invo's on the rear.

12-08-2011, 08:47 PM	#10
5thGenCamaroKid No fat chix, car scrapes. Drives: 2014 GMC Sierra 1500 Join Date: May 2010 Location: Alexandria, VA Posts: 296	Looking good! You guys sleeving the LS3 block for the FI 427?

12-09-2011, 11:53 AM	#13
PfadtRacing Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009 Location: SLC, UT Posts: 3,370	Great build Davenport! I hope the future owner can appreciate the effort and part selection that went into this car. It's going to be a riot to drive when it's finished! Those HRE's look awesome!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SEMA Show 2011 - New Camaro Products Showcase!	Sean@Phastek	Camaro Photos \| Spyshots \| Video \| Media Gallery	85	01-16-2012 10:51 PM
Automobile Reviews 2011 Chevrolet Camaro Convertible 2SS	Tran	Camaro Convertible Forum	33	07-28-2011 07:36 PM
Modern Camaro Performance - Lowest Prices Anywhere!	PartsTaxi.com	Sponsor Announcements / Giveaways / Contests	0	11-03-2010 10:50 AM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM