Generation 5 roll cage???? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tys2010camaro · 01-15-2011, 05:30 PM

I've been searching all over the U.S. looking for a Generation 5 roll cage for my 2010 SS. I don't need to go to full extreme but would like a 6 point that looks good but is practicle and drivable. Any help would be GREATLY APPRECIATED!!!

ToolFan66 · 01-15-2011, 06:09 PM

There should be some shops in your area to do the work I would think..

Bryan · 01-15-2011, 06:20 PM

There is a vendor on this forum that makes a bolt in roll cage. Don't remember who it was though. Might have to search.

Bryan · 01-15-2011, 06:21 PM

http://www.camaro5.com/forums/showthread.php?t=120624

Here is the thread.

pbm457 · 01-15-2011, 06:22 PM

Here you go.
http://www.phastekperformance.com/Fa...-roll-cage.htm

Trackspec Motorsports · 01-17-2011, 10:20 AM

I think we have the solution that everyone has been looking for! Made by RPM Roll Bars, a certified chassis shop for over 20 yers building race chassis, this 5pt (upgradable to a 6 pt) roll bar is perfect for the street driven camaro looking for an NHRA legal, 100% welded, fully coated, bolt in roll bar. It will get you legal and you can install it yourself. If you have checked the prices of custom cages these days, its nearly half that cost!

I think its exactly what you are looking for from as far as roll cages and practicallity goes!

Front seat maintains full adjustability
Swing out door bars- Remove in seconds for the street, installs easily at the track
Rear seat is still usable
Looks great coated in standard colors with optional color matching to vehicle and also the cool carbon fiber look!
Installs with simple hand tools, comes fully welded.
Bolt it in in an afternoon!
100% NHRA Legal 10.0 to 11.49
Each bar is tagged and certified with date of manufacture and serial number
Completely removable if you need to sell the car. Also, resale of the bar will be easy and you will get top dollar for it!

Please PM us with any questions!
As an introductory offer, get free shipping on your fully assembled roll bars!
See link below for more details
2010 2011 Camaro Bolt In NHRA Legal roll cage

mws444 · 01-21-2011, 09:14 PM

So you are saying I can still put the front seat all the way back? I am 6'4" kinda need the leg room.

Trackspec Motorsports · 01-22-2011, 10:55 AM

Depending on your angle of gangster lean on the seat back, the bar is designed to allow fore and aft movement of the seat which no other bar has built into it.

Hang on tight as there will be installs going on shortly and a report out with pics will be out soon!

At 6'4"! I can see your concern!!

John@trackspecmotorsports.com

Trackspec Motorsports · 01-30-2011, 08:36 PM

Some good info and pics

5th Gen Camaro Roll Cage

Trackspec Motorsports · 02-05-2011, 10:32 PM

The official GROUP BUY page!

http://www.camaro5.com/forums/showthread.php?p=2808191#post2808191

For you corner carvers, pick up the roadrace/autocross bar!

Trackspec Motorsports · 02-17-2011, 12:09 AM

Its official!

We have hit our goal of 10 cages in the group buy and moved the group up to the biggest discount bracket!!!!

We still have until the close of business monday feb 21st to enter the group buy so if anyone is looking for an NHRA legal, 10.0-11.50 second, fully coated, fully welded, bolt in roll cage, NOW IS THE TIME TO SAVE!!!!! You may never see discounts like this again!

Trackspec Motorsports · 02-21-2011, 09:24 AM

Last day on the group buy!!!

01-15-2011, 05:30 PM	#1
tys2010camaro Drives: 2010 camaro ss Join Date: Jul 2010 Location: Utah Posts: 352	Generation 5 roll cage???? I've been searching all over the U.S. looking for a Generation 5 roll cage for my 2010 SS. I don't need to go to full extreme but would like a 6 point that looks good but is practicle and drivable. Any help would be GREATLY APPRECIATED!!!

01-17-2011, 10:20 AM	#6
Trackspec Motorsports Drives: 2010 SS Camaro Join Date: Aug 2010 Location: Easton, Pa Posts: 181	RPM Roll bars- Bolt in, 100% NHRA legal, Completely removable! I think we have the solution that everyone has been looking for! Made by RPM Roll Bars, a certified chassis shop for over 20 yers building race chassis, this 5pt (upgradable to a 6 pt) roll bar is perfect for the street driven camaro looking for an NHRA legal, 100% welded, fully coated, bolt in roll bar. It will get you legal and you can install it yourself. If you have checked the prices of custom cages these days, its nearly half that cost! I think its exactly what you are looking for from as far as roll cages and practicallity goes! Front seat maintains full adjustability Swing out door bars- Remove in seconds for the street, installs easily at the track Rear seat is still usable Looks great coated in standard colors with optional color matching to vehicle and also the cool carbon fiber look! Installs with simple hand tools, comes fully welded. Bolt it in in an afternoon! 100% NHRA Legal 10.0 to 11.49 Each bar is tagged and certified with date of manufacture and serial number Completely removable if you need to sell the car. Also, resale of the bar will be easy and you will get top dollar for it! Please PM us with any questions! As an introductory offer, get free shipping on your fully assembled roll bars! See link below for more details 2010 2011 Camaro Bolt In NHRA Legal roll cage

01-21-2011, 09:14 PM	#7
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	So you are saying I can still put the front seat all the way back? I am 6'4" kinda need the leg room. __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who manufactures the strongest and thickest front sway bar?	55Designs	Suspension / Brakes / Chassis	36	10-01-2010 10:56 AM
5th Generation roll bar	tys2010camaro	5th Gen Camaro SS LS LT General Discussions	1	07-17-2010 11:42 PM
Anyone have a roll cage yet???	jrpxxii	5th Gen Camaro SS LS LT General Discussions	3	02-18-2010 07:32 PM
Pfadt or Eibach	DTS2SS	Suspension / Brakes / Chassis	9	01-22-2010 12:07 PM
Sway Bars. Myths, Knowledge, Understanding	Info@PeddersUSA.com	Suspension / Brakes / Chassis	24	11-16-2009 07:48 PM

01-15-2011, 06:09 PM	#2
ToolFan66 Drives: 2011 2SS 6.2L W/RS package Join Date: Jan 2011 Location: Colorado Posts: 3,008	There should be some shops in your area to do the work I would think..

01-15-2011, 06:20 PM	#3
Bryan Drives: SIM 2SS/RS M6 Join Date: Oct 2009 Location: Orlando, FL Posts: 279	There is a vendor on this forum that makes a bolt in roll cage. Don't remember who it was though. Might have to search.

01-15-2011, 06:21 PM	#4
Bryan Drives: SIM 2SS/RS M6 Join Date: Oct 2009 Location: Orlando, FL Posts: 279	http://www.camaro5.com/forums/showthread.php?t=120624 Here is the thread.

01-15-2011, 06:22 PM	#5
pbm457 Drives: 2009 Dodge "Cuda", 2010 Camaro Join Date: Nov 2010 Location: St. Pete, Fl. Posts: 120 View My Garage	Here you go. http://www.phastekperformance.com/Fa...-roll-cage.htm

01-22-2011, 10:55 AM	#8
Trackspec Motorsports Drives: 2010 SS Camaro Join Date: Aug 2010 Location: Easton, Pa Posts: 181	Depending on your angle of gangster lean on the seat back, the bar is designed to allow fore and aft movement of the seat which no other bar has built into it. Hang on tight as there will be installs going on shortly and a report out with pics will be out soon! At 6'4"! I can see your concern!! John@trackspecmotorsports.com

01-30-2011, 08:36 PM	#9
Trackspec Motorsports Drives: 2010 SS Camaro Join Date: Aug 2010 Location: Easton, Pa Posts: 181	Some good info and pics 5th Gen Camaro Roll Cage

02-05-2011, 10:32 PM	#10
Trackspec Motorsports Drives: 2010 SS Camaro Join Date: Aug 2010 Location: Easton, Pa Posts: 181	The official GROUP BUY page! http://www.camaro5.com/forums/showthread.php?p=2808191#post2808191 For you corner carvers, pick up the roadrace/autocross bar!

02-17-2011, 12:09 AM	#11
Trackspec Motorsports Drives: 2010 SS Camaro Join Date: Aug 2010 Location: Easton, Pa Posts: 181	Its official! We have hit our goal of 10 cages in the group buy and moved the group up to the biggest discount bracket!!!! We still have until the close of business monday feb 21st to enter the group buy so if anyone is looking for an NHRA legal, 10.0-11.50 second, fully coated, fully welded, bolt in roll cage, NOW IS THE TIME TO SAVE!!!!! You may never see discounts like this again!

02-21-2011, 09:24 AM	#12
Trackspec Motorsports Drives: 2010 SS Camaro Join Date: Aug 2010 Location: Easton, Pa Posts: 181	Last day on the group buy!!!