02-24-2012, 08:46 AM | #1 |
Drives: 05 GTO Join Date: Jul 2009
Location: Wichita, KS
Posts: 1,243
|
BullF-16's 9" IRS Install
BullF-16 Called us up awhile back to get one of our fabricated 9" IRS kits, after talking with him for a bit he decided to have it installed at SNL Performance in Fort Worth. SNL is also the home of Monster Clutch Company.
Since SNL is one of our largest dealers I decided I would come down for the install to answer any questions and to snap a few photo's. Jim (BullF-16) chose the Strange 35 spline S-Trac pumpkin along with our big 35 spline inner stubs. This way he gets a Lifetime warranty for the entire rear since the Strange S-Trac comes with a lifetime warranty plus all the Gforce parts are covered by our Lifetime warranty as well. Our 9" kits also come with 300m axles, billet outer stubs and all the brackets and hardware to bolt right in. Our 9" kit for the Camaro was designed to be bolted into the IRS Camaro, it's much more then a stock housing, it's a fully fabricated housing using all laser cut and cnc machined parts plus it's fully tig welded in our jig. The face plates are 3/8" thick and the covers are 3/16" thick. We designed our housing for use in 2000+hp applications but it works great in a stock Camaro as well since it bolts right in with many pumpkin options available. Just one look by customers and they see why our fabricated 9" is the bad boy on the market! For Jim's 9" kit, we used a new driveshaft that we have been working with Dynotech Driveshafts to develop for the new Camaro. It is an aluminum shaft with no cv joint on the front. This greatly reduces the weight on the nose of the shaft. This eliminates vibrations and gives the car a nice firm feel. It uses an aluminum splined slip assembly in the front, it's not anything like the old steel slip shafts from the old days. Dynotech has been making and selling shafts like this to the GT500 Mustang guys for a while now and they just love them. The shafts are spun on Dynotechs high speed ballancer and tested before leaving Dynotech. The great thing about the new shaft is it dropped a little over 9 lbs over the stock shaft. The stock shaft weighed in at about 24 lbs, the new Dynotech shaft weighs in at just 15 lbs. We will be offering these new driveshafts for OEM replacement shafts in the very near future at a great price. The install photo's speak for themselves, it took about 5 hours for the removal of the stock parts and install of the 9" kit. Jim also had a clutch installed so we were there all day. Jim is a very happy customer to say the least Here is Jim's 9" laid out before we packed it up for the trip to SNL (Monster Clutch Co.) [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/DS****14.jpg[/IMG] [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/DS****15.jpg[/IMG] [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/DS****18.jpg[/IMG] Here we are at SNL Performance in Fortworth First off we got everything unpacked and laid out for assembly. [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/BullF-16%209%20Inch%20IRS%20Install/DS****40.jpg[/IMG] Step 1 is installing the studs in the housing and putting the pumpkin in. [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/BullF-16%209%20Inch%20IRS%20Install/DS****43.jpg[/IMG] [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/BullF-16%209%20Inch%20IRS%20Install/DS****41.jpg[/IMG] Dont forget to put a bead of silicone around the pumpkin, our housings are precision machined so no gasket is needed. [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/BullF-16%209%20Inch%20IRS%20Install/DS****45.jpg[/IMG] [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/BullF-16%209%20Inch%20IRS%20Install/DS****47.jpg[/IMG] Next step before tightening down the studs is installing the inner stubs to make sure the pumpkin is lined up with the bearing bores. Again, a little bit of silicone around the bearings to seal the stubs in. [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/BullF-16%209%20Inch%20IRS%20Install/DS****49.jpg[/IMG] [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/BullF-16%209%20Inch%20IRS%20Install/DS****57.jpg[/IMG] [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/BullF-16%209%20Inch%20IRS%20Install/DS****85.jpg[/IMG] [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/BullF-16%209%20Inch%20IRS%20Install/DS****88.jpg[/IMG] [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/BullF-16%209%20Inch%20IRS%20Install/DS****90.jpg[/IMG] [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/BullF-16%209%20Inch%20IRS%20Install/DS****91.jpg[/IMG] [IMG]http://i25.photobucket.com/albums/c91/nicholscl/Camaro%20-%20G8/BullF-16%209%20Inch%20IRS%20Install/DS****96.jpg[/IMG] Next up was installing the new Dynotech driveshaft All done except for putting cat back on We didnt have to cut anything on the Stainless works cat back, just had to loosen some clamps and twist some pipes here and there to get everything to clear. |
02-24-2012, 08:47 AM | #2 |
Drives: 05 GTO Join Date: Jul 2009
Location: Wichita, KS
Posts: 1,243
|
All the photo's can be seen at www.photobucket.com/bullf-16
|
02-24-2012, 10:18 AM | #3 |
USAF retired! Thank God!
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011
Location: North Texas
Posts: 2,799
|
Excellent write-up Chris! I am one happy customer. Only 200 miles left on the clutch and rear end break-in then i can let loose and not worry about leaving parts all over the street.
The car drives better than stock and the tranny feels more connected to the motor. Thanks for driving down to oversee everything....Now thats customer service!
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: 1281/1133 SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates all setup by JusticePete! :Gforce 9" 35spline S-Trac, 1500hp Outlaw axles, 3.5"alum DS, Monster Triple disc; 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
|
02-24-2012, 07:49 PM | #4 |
USAF retired! Thank God!
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011
Location: North Texas
Posts: 2,799
|
One hundred miles more till all is broken in! Couldnt resist and hammered on it a bit to get this annoying crotch rocket dude away from me. I guess he thought his wheelys were impressing me. I think it ended with me impressing him. Got a big thumbs up from him at the end of it when he caught back up. No speed limits were harmed in the filming of this episode!
also a shameless bump for GForce engineering and Chris for this truly amazing setup!
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: 1281/1133 SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates all setup by JusticePete! :Gforce 9" 35spline S-Trac, 1500hp Outlaw axles, 3.5"alum DS, Monster Triple disc; 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
|
02-24-2012, 08:00 PM | #5 | |
Drives: 05 GTO Join Date: Jul 2009
Location: Wichita, KS
Posts: 1,243
|
Quote:
I bet he was surprised ! |
|
02-24-2012, 08:38 PM | #6 |
Camaro SS Lover
Drives: 2010 Camaro 2SS/RS Black IOM Join Date: Jun 2010
Location: Toronto, Ontario (Canada)
Posts: 2,863
|
That things looks very solid, and I can't say enough about how awesome that was to help you install the product. Cheers to EForce.
I bet you can't wait to slam the pedal into the ground. |
02-24-2012, 09:07 PM | #7 |
WICKDSS
Drives: 2011 1SS/RS IOM LS3 Join Date: May 2010
Location: Wichita, Kansas
Posts: 1,111
|
Very nice setup! I really do like the way the new driveshaft is made. The slip joint is nothing like you imagine, it is super tight.
__________________
2011 IOM SS/RS, M6. Look up our all generation Camaro club website at Heartland Camaros
Gforce Engineering Drivetrain, ECS 1500 Supercharger, TSP Cam, Alky Controls Meth single nozzle. 91 octane, 698 RWHP 625 rwtq. 4200#+, Tuned by Justin "Justune" Kalwei 11.57 @ 126.8 mph with a crappy 1.80 60'.....still learning to drive....M&H DR's and skinnies on 17" Welds. |
02-24-2012, 09:19 PM | #8 |
SST...
Drives: SST Camaro 2010 Join Date: Oct 2008
Location: East Coast of Florida
Posts: 5,927
|
Great install and nice lifetime warranty...
Good stuff Jim. |
02-24-2012, 11:34 PM | #9 |
Drives: 2010 camaro Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,273
|
looks good , but take it easy on them new gears..def better set up then the old style m6 dshaft
__________________
|
02-25-2012, 09:16 AM | #10 |
USAF retired! Thank God!
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011
Location: North Texas
Posts: 2,799
|
Finished the break in last night. I took the car out this morning on the back roads and did some high speed testing. Only got to 140, did not want to push anything. Smooth a glass, not a single noise or vibration felt. Could have easily pushed past 150 but haven't changed the diff fluid yet.
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: 1281/1133 SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates all setup by JusticePete! :Gforce 9" 35spline S-Trac, 1500hp Outlaw axles, 3.5"alum DS, Monster Triple disc; 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
|
02-25-2012, 09:27 AM | #11 | |
Drives: 05 GTO Join Date: Jul 2009
Location: Wichita, KS
Posts: 1,243
|
Quote:
And to think some tried to say that shaft isnt for high speed.. that is down right silly That new driveshaft is the most innovative product I've seen in a long time, right behind our fabricated 9" |
|
02-25-2012, 11:21 AM | #12 |
Account Suspended
Drives: 2014 SS Join Date: Jan 2011
Location: Haslet, TX
Posts: 744
|
Always a pleasure working on your car Jim, and nice seeing you Chris, it's been a while.
Glad to hear your enjoying it, this was by far the easiest install on one of these we've done. Very simple bolt in, no cutting, welding, or cussing necessary! |
02-25-2012, 11:30 AM | #13 | |
USAF retired! Thank God!
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011
Location: North Texas
Posts: 2,799
|
Quote:
Hey Steve, welcome to Camaro5! Awesome install from you guys BTW! You guys always impress I'm gonna post a thread in the Texas section to give you guys some credit.
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: 1281/1133 SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates all setup by JusticePete! :Gforce 9" 35spline S-Trac, 1500hp Outlaw axles, 3.5"alum DS, Monster Triple disc; 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
|
|
02-25-2012, 11:51 AM | #14 | |
Drives: 05 GTO Join Date: Jul 2009
Location: Wichita, KS
Posts: 1,243
|
Quote:
And agreed, our Camaro 9" kit is one of the best designed products we've come out with yet! |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gforce Engineering Fabricated 9" IRS | GFORCE1320 | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 210 | 02-25-2012 09:20 AM |
*Sale* Driveshaft Shop 9" IRS, Axles, Driveshafts.. | Sales @ ECS | Transmission / Driveline | 18 | 02-09-2012 02:34 PM |
Anyone with a 9" IRS Conversion? | Irreverent | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 25 | 05-28-2011 08:20 AM |
Come check out our 9" IRS kit at CamaroFest | GFORCE1320 | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 1 | 04-18-2011 02:39 PM |
Introducing the Gforce Engineering fabricated 9" IRS kit | GFORCE1320 | Transmission / Driveline | 1 | 03-04-2011 10:25 AM |