Bo's Ported Throttle body - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

kenshin98 · 06-04-2014, 07:35 PM

Hello, just recieved my ported throttle body by bo white.
First off id like to say instal was not complicated at all, i think it mustve taken about 25 min.
Recently installed a cai by k n n and i think this greatly added to the feel of gain in throttle response i instantly felt after it got slapped on.
The initial lagg it used to have is 100% gone. I couldnt be happier with what i recieved and the price i paid. If anyone is on the fence about this, dont be. I can promise you wont be disappointed.
Also id like to thank Jason @jacfab for responding rapidly to all the questions i bombarded him with about my purchase and other mods i plan on doing in the near future.
If anyone has any input or questions feel free to ask or comment, i dont mind sharing my expirience with this mod.
Next i think i will be getting an air scoop and washer bottle relocate from apex as i have heard great things about.

Cheers, Alex.

Pro Stock John · 06-04-2014, 07:46 PM

Congrats I have one of his throttle bodies too, excellent throttle response, very noticeable.

Jason@JacFab · 06-04-2014, 09:26 PM

Thank you for your business, I'm glad to hear you are pleased with it!!

For those that aren't familiar with Bo's work, he really goes the extra mile to get the most out of these throttle bodies

rich3fan · 06-04-2014, 09:33 PM

I would be more familiar had UPS not goofed.

camarosspower · 06-04-2014, 10:02 PM

How are these compared to the vmax CNC tb

Ohten · 06-04-2014, 10:02 PM

Quote:

Originally Posted by Jason@JacFab

Thank you for your business, I'm glad to hear you are pleased with it!!

For those that aren't familiar with Bo's work, he really goes the extra mile to get the most out of these throttle bodies

Where are the throttle bodies listed on your site?

axis · 06-04-2014, 11:02 PM

Quote:

Originally Posted by camarosspower

How are these compared to the vmax CNC tb

IMO, they are much better. No they aren't spiral CNC'd but that's debateable as to whether it actually does any good. They both port the hump out which is what increases throttle response. Bo's TB's go one step further and modifies the shaft, which actually increases the the amount of air going through the TB. That in itself is worth the price of admission.

Vmaxx doesn't do that.

If you've never heard of Bo White, he's been porting LS TB's and heads for YEARS and is all over the other LS boards. Those that know him call him half pint. haha

Quote:

Originally Posted by Ohten

Where are the throttle bodies listed on your site?

Jason just started carrying them so they're not up yet. You can get one by PMing him though.

Jason@JacFab · 06-05-2014, 12:08 AM

Quote:

Originally Posted by Ohten

Where are the throttle bodies listed on your site?

I think Axis pretty much answered most of the questions left hanging in the air... I haven't added them to my website yet as I'm hoping to build up a little stock pile, I'm not a big fan of trying to sell things I don't have on the shelf ready to ship. If you're interested in a Bo White ported TB, send me a pm on here.

Twice the porting, half the shaft

Bo knows

BubbaSS · 06-05-2014, 12:23 AM

Man I wish I would have waited for this :\

litle88 · 06-05-2014, 04:27 AM

Yup axis nailed it.

I had a Bo white TB from back in the day, that man pretty much started this whole thing in the Ls world.

I guess it's fair to say that Bo knows Flow. You guys purchasing these tb's will realize this, I'll just let his product do the talking.

camarosspower · 06-05-2014, 05:59 AM

Quote:

Originally Posted by axis

IMO, they are much better. No they aren't spiral CNC'd but that's debateable as to whether it actually does any good. They both port the hump out which is what increases throttle response. Bo's TB's go one step further and modifies the shaft, which actually increases the the amount of air going through the TB. That in itself is worth the price of admission.

Vmaxx doesn't do that.

If you've never heard of Bo White, he's been porting LS TB's and heads for YEARS and is all over the other LS boards. Those that know him call him half pint. haha

Jason just started carrying them so they're not up yet. You can get one by PMing him though.

Thanks a lot axis . I think I might try one of those out pretty soon. How's the pricing?

Z1 Dunn · 06-05-2014, 06:03 AM

so Bo thins down the shaft?

Denis · 06-05-2014, 08:15 AM

i need to pick one of these up.

BubbaSS · 06-05-2014, 08:51 AM

Quote:

Originally Posted by Z1 Dunn

so Bo thins down the shaft?

The shaft's design is slotted so as to cradle the blade. He removes the front of the shaft. I assume that he disassembles the whole thing entirely to get all of it removed. You really need to know what you're doing to get this done right.

06-04-2014, 07:35 PM	#1
kenshin98 Drives: 2014 chevy camaro 1ss rs auto Join Date: Oct 2013 Location: miami florida Posts: 82	Bo's Ported Throttle body Hello, just recieved my ported throttle body by bo white. First off id like to say instal was not complicated at all, i think it mustve taken about 25 min. Recently installed a cai by k n n and i think this greatly added to the feel of gain in throttle response i instantly felt after it got slapped on. The initial lagg it used to have is 100% gone. I couldnt be happier with what i recieved and the price i paid. If anyone is on the fence about this, dont be. I can promise you wont be disappointed. Also id like to thank Jason @jacfab for responding rapidly to all the questions i bombarded him with about my purchase and other mods i plan on doing in the near future. If anyone has any input or questions feel free to ask or comment, i dont mind sharing my expirience with this mod. Next i think i will be getting an air scoop and washer bottle relocate from apex as i have heard great things about. Cheers, Alex.

06-04-2014, 07:46 PM	#2
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Congrats I have one of his throttle bodies too, excellent throttle response, very noticeable. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

06-04-2014, 09:33 PM	#4
rich3fan What's this button do? Drives: 2019 Black 2SS Join Date: Apr 2013 Location: Wylie, Texas Posts: 1,364	I would be more familiar had UPS not goofed. __________________ 2019 Black & Red & Silver 2SS - Bone Stock

06-05-2014, 12:23 AM	#9
BubbaSS WHAT RED LIGHT?! Drives: 2011 Black Camaro 2SS/RS M6 Join Date: Apr 2011 Location: Miami, Florida Posts: 1,115	Man I wish I would have waited for this :\ __________________ 2011 2SS/RS M6 BLACK - VARARAM NO TUNE INTAKE, MODDED AND PORTED TB, PORTED INTAKE MANIFOLD, VITESSE THROTTLE CONTROLLER, DOUG THORLEY LT'S, CATLESS, X-PIPE, 25" STAINLESS WORKS RETRO CHAMBERED MUFFLERS, CUSTOM 2.5" MANDREL BENT EXHAUST, RICHMOND 4.10 GEARS, CUSTOM CAM (231/242 @ 114LSA), MUSTANG DYNO TUNED BY TORQ, 20% CERAMIC TINTS, EIBACH PROKIT SPRINGS 1" DROP, HAWK PERFORMANCE CERAMIC BRAKES, NITTO INVO TIRES, HYDROCARBON TAIL LIGHT AND FOG LIGHT BEZELS BY EMBLEMPROS, METRA DASH KIT, JVC KW-AV71BT, PHOENIX GOLD iAMP GM1, PASSPORT QI45 - 450 RWHP 415 RWTQ

06-05-2014, 04:27 AM	#10
litle88 V8 Lounge member #2 Drives: 2001 Ws6 Join Date: Sep 2009 Location: Burbank,IL Posts: 6,373	Yup axis nailed it. I had a Bo white TB from back in the day, that man pretty much started this whole thing in the Ls world. I guess it's fair to say that Bo knows Flow. You guys purchasing these tb's will realize this, I'll just let his product do the talking. __________________ 2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.

06-04-2014, 09:26 PM	#3
Jason@JacFab Drives: 2016 1LT RS Camaro; 72 Chevelle Join Date: Apr 2008 Location: Central Point, OR Posts: 5,688 View My Garage	Thank you for your business, I'm glad to hear you are pleased with it!! For those that aren't familiar with Bo's work, he really goes the extra mile to get the most out of these throttle bodies

06-04-2014, 10:02 PM	#5
camarosspower Drives: 2010 camaro ss Join Date: Jun 2010 Location: Port Arthur, Tx Posts: 2,383	How are these compared to the vmax CNC tb

06-05-2014, 06:03 AM	#12
Z1 Dunn Account Suspended Drives: orange ss camaro Join Date: Dec 2013 Location: louisiana Posts: 30	so Bo thins down the shaft?

06-05-2014, 08:15 AM	#13
Denis Drives: 2010 SS Join Date: May 2012 Location: Yorktown Heights, NY Posts: 7,695 View My Garage	i need to pick one of these up. __________________