08-20-2013, 03:04 AM | #1 |
Drives: 2013 2ls Join Date: Aug 2013
Location: california
Posts: 36
|
Halos
Phastek Dual-Color HALO Headlight Kit by Oracle :: All 2010-2013 Camaro SS/LS/LT/RS
Read more: http://www.phastekperformance.com/20...#ixzz2cUhqwI9L Is this all I need to give my non RS 2LS Halos? ($189.95) And how much would installation cost? Seems too good to be true. |
08-20-2013, 03:19 AM | #2 |
Drives: 2013 2SS/1LE, 2004 Cavalier Join Date: Sep 2012
Location: jax, FL
Posts: 1,344
|
Looks to be about right. It's a different kit than what I used, but it should be all you need if you just plan to use the switch. I wound up getting a little crazier with my install, so I bought more wiring, which you will probably need as well (plus splices/connectors). The halo wires just aren't long enough if you plan to run them into the cabin.
As for install price, I can't help you there. I did everything myself. |
08-20-2013, 10:04 AM | #3 | |
Drives: 2013 2ls Join Date: Aug 2013
Location: california
Posts: 36
|
Quote:
Thanks. If I buy this kit can I just take it to any auto body? And would they have the extra wiring there because I wouldn't know where to buy it. |
|
08-20-2013, 12:04 PM | #4 |
Drives: 2013 2SS/1LE, 2004 Cavalier Join Date: Sep 2012
Location: jax, FL
Posts: 1,344
|
Hmm, that I'm not sure about. Best bet would probably be to call some tuner/custom shops instead of body shops, I'd think. See what they say first. Everything I've done so far has been diy, so I don't have a lot of experience with the shops, sorry
|
08-20-2013, 04:50 PM | #5 |
You are looking at just the kit...You have to open your lites to do this.....
__________________
K&N cai..... WCC underhood lighting.... 1LE strut tower brace.... Custom painted Fuse box/engine covers & strut tower brace.... Pfadt 1.25 lowering springs.....Ghosted side markers..... |
|
08-20-2013, 04:55 PM | #6 |
Drives: 2013 Join Date: Jul 2013
Location: Kansas
Posts: 207
|
I suggest going with the Eagle Eye headlights. They have the Halo built in and they look fantastic.
__________________
Hawk3907 2013 |
08-20-2013, 04:57 PM | #7 |
You need to separate the headlights with a heat gun or stick em in an oven for 20 min to loosen adhesive. you can splice them into the DRL's I believe so don'thave to run a switch.
|
|
08-20-2013, 05:10 PM | #8 |
Drives: 2013 2ls Join Date: Aug 2013
Location: california
Posts: 36
|
Would pep boys do this? Or a Chevrolet Service dept, or a local auto body?
|
08-20-2013, 08:27 PM | #9 |
Emerald Coast Camaros
Drives: A lot of show, not much go. Join Date: Mar 2011
Location: Emerald Coast
Posts: 3,388
|
Whereas those do look good...the OP wants dual color halos as to change them up. The eagle eyes do not do this.
|
08-20-2013, 09:53 PM | #10 |
Drives: 2013 2ls Join Date: Aug 2013
Location: california
Posts: 36
|
|
|
|
Tags |
2ls, halo, light |
|
|