03-21-2010, 12:43 PM | #43 |
After getting the Idea from this thread and using the paint suggestion from fellow member FIRENGNRED, Rustoleum Sunset Red Plastic Paint, I finally got around to painting the trunk covers. Dosn't look half bad and I think the color is real close.
Washed with dish soap and hot water and 3 coates of paint and done. |
|
03-21-2010, 01:18 PM | #44 |
Drives: 10 IBM SS RS/14 1500 Z71 Join Date: Jan 2010
Location: Lehigh Valley, PA
Posts: 1,577
|
You should definitely make a DIY thread, that's a great little mod!! Really give it a finished look.
|
03-21-2010, 02:10 PM | #45 |
Psssssssssshhhhhhhhhhhhh!
Drives: under contruction Join Date: Nov 2009
Location: Marysville, Ohio
Posts: 12,996
|
Why not post the paint and prep info in the thread?
|
03-21-2010, 04:07 PM | #46 |
Lady Racer
|
__________________
2014 Ford F150 Tremor 2012 Shelby GT500 |
03-21-2010, 04:17 PM | #47 |
Camaro Owner Soon!
Drives: Chevrolet Cobalt SS/SC S2 GMPP Join Date: Jan 2009
Location: Colorado
Posts: 185
|
Maybe call your dealer about paint information?
I was able to buy spray cans of 2006 GM Ultra Silver Metalic for use on my Cobalt's trim pieces and the color was a 100% perfect match and the can was about $17 each. I assume that at some point camaro colors will be available in Spray Can form aswell. |
03-21-2010, 04:21 PM | #48 |
Psssssssssshhhhhhhhhhhhh!
Drives: under contruction Join Date: Nov 2009
Location: Marysville, Ohio
Posts: 12,996
|
The colors are available (through the dealer and others). I just never know if I need primer, top coat, and clear coat.
|
03-21-2010, 04:30 PM | #49 |
I went to Autozone for the Rustoleum Sunrise Red Plastic Paint.
I washed it with soap and water and applied 3 coates per the instructions on the can. No Prime or Clear needed. If you have a victory red car this is a close match. I also did the engine cover and the fuse box cover. They are pictured in the DIY thread on weekend engine cover project. I saw a number of coler match paint at Autozone as well. In the DIY someone use a can of colormatch to do there IOM engine cover and it was pretty close as well. Might check and see how close of a match you can find to what your looking for. |
|
03-21-2010, 05:37 PM | #50 |
Hooked on AutoX
|
Very Clean!
You should consider editing this thread to a DIY and having this thread moved by a mod. Very cool though. I too would like the paint/prep info - I've been considering doing mine in Gloss Black. |
03-23-2010, 02:41 AM | #51 |
Everyone, I originally didn't post the paint and prep info because I really didn't think that this mod would create such an interest, but now that it has I'm going to share the mod and I've also added another pic which has more sunlight showing the metal specks in the paint which IMO helps the mod look more like IOM because of the pearls that are in it.
The color I used is Duplicolor metal specks Burnt Copper. I was able to pick this up at my local autozone (around $7.00). To prep I took the covers off, washed them with mild soap and cleaned them up real good to make sure there was no oils, dirt etc.... dried them off with a lint free towel/chamoas, I then sprayed a few coats of duplicolor adhesion promoter (both sides), let set for a few minutes then applied several coats of the burnt copper paint letting the coats dry about 5-10 minutes before adding another coat, after letting the paint dry about 30 minutes I then shot a couple coats of acrylic clear, let dry overnight then re-installed the next day. For the plastic snap in covers (6 total) I used Duplicolor Metal specks Sparkle Silver with the same process. This paint almost looks chrome. Well, I Hope this helps let me know if and of you have any other questions. Thanks. One last thing, it is very important to spray the adhesive promoter in order for the paint to adhere correctly to plastic. Enjoy! |
|
04-04-2010, 09:51 AM | #52 |
|
i dropped mine off at painters before he started my job they also look good in abm. thanks for the suggestion. sorry car is dirty
Last edited by 3CamarosOnHand; 04-04-2010 at 09:56 AM. Reason: adding words |
04-04-2010, 10:08 AM | #53 |
Nice, but my opinion is I don't need this, is it really worth the effort ?? I think I have opened my trunk twice in the last 10 months ONLY to disconnect/connect the battery...I am glad though that people on this site realize they can do whatever they want to their car !!
|
|
04-04-2010, 01:01 PM | #54 | |
Drives: 2010 SS Join Date: Nov 2009
Location: So Cal
Posts: 2,197
|
Quote:
It isn't all that bad in black, but it does look 'unfinished'.
__________________
|
|
04-04-2010, 02:46 PM | #55 | |
SoCal Mayhem
Drives: 2017 2LT Hyper Blue Metallic Camaro Join Date: May 2009
Location: Lakewood, California
Posts: 5,918
|
Quote:
this mods looks really good! I'm not sure if I want to do it to mine yet though. I kinda like it black. maybe I'll paint them a glossy black or something.
__________________
|
|
05-02-2010, 12:06 AM | #56 |
having FUN now 13.66@101
|
I completed this project of painting the close outs today.
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New from RPI! 2010 Camaro Pre-Painted Body Color Rear Spoiler! $399.00, painted! | RPI Designs | Exterior Parts & Accessories | 10 | 03-25-2010 02:42 PM |
Custom Painted Engine Covers Available | ClutchKargo | V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment | 2 | 02-21-2010 03:42 PM |
Who wants Rally Stripes, painted hood/deck? | d69chris | USA - California | 30 | 02-05-2010 12:12 AM |
Carbon Fiber Cowl Hood, Trunk, and more! PHASTEK Peformance | Sean@Phastek | Exterior Parts & Accessories | 3 | 01-29-2010 02:44 PM |
SLP Black Painted Wheels With Machined Face 20" x 8" / 20" x 9" | tbyrne | Wheels / Tires | 9 | 01-18-2010 11:41 AM |