You are browsing camaro5 
 |
|
05-28-2013, 07:29 PM
|
#1 |
 Drives: 2013 Camaro LS M6 Join Date: Mar 2013
Location: Menomonie, WI
Posts: 59
|
Sport Muscle Tach tire size?
I need some help. I bought some sport muscle tach wheels and the recommended tire size 285/40/20 seems to be very hard to find and also expensive. Will some 275/40/20's work with a 20x10 wheel?
__________________
 K&N intake, Resonated X-pipe w/muffler delete, Trifecta Tune, rashes up sport muscle tachs. |
|
|
|
05-28-2013, 07:37 PM
|
#2 |
|
Drives: 2013 Camaro LS M6 Join Date: Mar 2013
Location: Menomonie, WI
Posts: 59
|
I forgot to mention the wheels are 20x10 rear, 20x9 front. From what I have read the 275/40/20s would fit better on the front wheels than the rears. My goal was to have 275's on the rear and 245's on the front. Is it possible with wheels as wide as these. I found a great deal on 2 hankook ventus tires and want to make sure they will work.
__________________
K&N intake, Resonated X-pipe w/muffler delete, Trifecta Tune, rashes up sport muscle tachs. |
|
|
|
|
05-28-2013, 08:18 PM
|
#3 |
           |
I do have the 245x45 at the front , on a 29x9 wheel , and I had at some point a 275x40 on a 20x10 wheel at the rear , worked great , just a bit stretched , but looked good for me
So , yes it will work But pay attention about the offsets on the new wheels |
|
|
|
|
05-29-2013, 07:58 AM
|
#4 |
Drives: 1-800-428-8355 X4664 Join Date: Sep 2010
Location: rudy@tirerack.com
Posts: 1,186
|
275/40R20 will work fine on a 10 inch wheel. No issues.
|
|
|
|
|
06-09-2013, 02:24 PM
|
#5 |
|
Drives: 2013 Camaro LS M6 Join Date: Mar 2013
Location: Menomonie, WI
Posts: 59
|
Any advice on seating the bead. The shop I have the wheels at right now is having trouble getting the bead to seat on the 10" wheels.
__________________
K&N intake, Resonated X-pipe w/muffler delete, Trifecta Tune, rashes up sport muscle tachs. |
|
|
|
|
|
|
|
 |
|
|
