Take off Performance Bolt-Ons - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sstampa · 04-26-2013, 05:56 PM

My car is going in for an ECS SC1500 Supercharger install at Florida Speed and Power in Bradenton, FL on 5/13. The following parts will be removed by the shop and no longer needed. All have less than 3,000 miles on them. I will add pictures to the thread after they have been removed by FSP. These can be picked up from FSP during the week of May 13-17, or shipped (except the exhaust) at buyer's expense.

CAI parts $350 SOLD
CAI brand CAI, black powdercoated
ADM race scoop
ADM remote mount washer bottle kit

Underdrive pulley setup SOLD
SLP 25% Underdrive Pulley
Both belts (I believe they are Gates brand)
ARP Crank Bolt (no more replacing the torque to yield bolt)

XS Power SS exhaust, $450 plus shipping SOLD
3" catted connection pipe
3" cat-back without tips (were cut off for use with GFX)
Selling this so cheap because the primary tube on the drivers side was dented in to clear the steering shaft. The x-pipe has also been dented in on both sides to clear my LPW differential cover. The entire exhaust is professionally tig welded, except for the connection point at the header collector and the muffler connection points. It is very usable and the slight restriction caused by the dents is minimal for all but very high horsepower applications. I will add pictures after it is removed by FSP.

MBRP rectangular tips for GFX SOLD

Pictures to follow when they come off the car. I will throw these in with the XS Power exhaust if someone pays the $450 I'm asking.

Red Jewel Tintcoat Engine Cover, SOLD

New 160 Thermostat (came with ECS Blower kit, not using), SOLD

robi523 · 04-26-2013, 07:01 PM

If you decide to ship I want the intake please... or I will pick it up if I happen to get a trip to the area.

RJT-SS · 04-26-2013, 08:27 PM

Would you post a pic of the engine cover?

bombton_1le · 04-26-2013, 09:50 PM

Pm sent

Thapilot · 04-26-2013, 10:14 PM

Underdrive Pulley Kit for me...PM sent as well.

Abrahams11SS · 04-27-2013, 05:32 AM

Selling everything since you're going big time huh?? Nice. I may have to take that underdrive kit off your hands. Did that make a big difference ?

sstampa · 04-27-2013, 06:56 AM

I have no idea if it made a difference, since I had everything that is currently for sale installed at once and dyno tuned. I made 416 rwhp on a hot July day. I'm guessing 5 hp. No issues with charging or cooling.

Since your in Tampa, you could have Matt install the pulley as soon as it comes off my car. I have no idea how much it would cost, but it's not a big job. I did the install myself and it took me 2 hours, but I'm not a professional.

sstampa · 04-27-2013, 07:03 AM

Just so everyone interested knows, first in line will be the first to commit to a each part that is local, so I don't have to ship. If no one local wants a particular part, I'll sell to the first person in line that I have to ship to.

Assuming the parts come off without a hitch, everything will be in very good shape, as these are all low mile parts.

Nutro · 04-27-2013, 02:07 PM

Does anyone want just the CAI intake? I'd like to buy just scoop and washer relocate as mentioned in our PM.

StangKiller-SS · 04-27-2013, 02:31 PM

PM sent!

sstampa · 04-27-2013, 07:27 PM

Engine cover pics. Cover was pulled at around 2000 miles. Excellent condition, no scratches.

GYac · 04-27-2013, 07:30 PM

PM sent for tips

sstampa · 04-27-2013, 07:34 PM

MBRP GFX Rectangular tip pictures. These are a second pair of tips that are not currently installed on the car. They have some blemishes, shown in the pictures. Some marks from rubbing the top of the GFX exhaust bezel and the rolled edges on this set are not perfect (manufacturing issue). I will let this set go for $30 plus shipping due to the issues. However, they do look good on the car and the marks will not show as long as they are not installed sticking out of the bezels. These fit 3" exhaust only. The other set is in much better condition and the rolled edges are good. Will post those pics when exhaust is pulled.

Rub Marks

Rolled edge imperfections

GYac · 04-27-2013, 07:45 PM

How much shipped for the tips to 20764

04-26-2013, 05:56 PM	#1
sstampa Drives: 2011 2SS/RS RJT Join Date: Aug 2010 Location: tampa, fl Posts: 166	Take off Performance Bolt-Ons My car is going in for an ECS SC1500 Supercharger install at Florida Speed and Power in Bradenton, FL on 5/13. The following parts will be removed by the shop and no longer needed. All have less than 3,000 miles on them. I will add pictures to the thread after they have been removed by FSP. These can be picked up from FSP during the week of May 13-17, or shipped (except the exhaust) at buyer's expense. CAI parts $350 SOLD CAI brand CAI, black powdercoated ADM race scoop ADM remote mount washer bottle kit Underdrive pulley setup SOLD SLP 25% Underdrive Pulley Both belts (I believe they are Gates brand) ARP Crank Bolt (no more replacing the torque to yield bolt) XS Power SS exhaust, $450 plus shipping SOLD 3" catted connection pipe 3" cat-back without tips (were cut off for use with GFX) Selling this so cheap because the primary tube on the drivers side was dented in to clear the steering shaft. The x-pipe has also been dented in on both sides to clear my LPW differential cover. The entire exhaust is professionally tig welded, except for the connection point at the header collector and the muffler connection points. It is very usable and the slight restriction caused by the dents is minimal for all but very high horsepower applications. I will add pictures after it is removed by FSP. MBRP rectangular tips for GFX SOLD Pictures to follow when they come off the car. I will throw these in with the XS Power exhaust if someone pays the $450 I'm asking. Red Jewel Tintcoat Engine Cover, SOLD New 160 Thermostat (came with ECS Blower kit, not using), SOLD __________________ Todd Downing 2011 2SS/RS LS3/M6 RJT, GFX, ECS Blower, FSP Blower Cam, SW 2" headers/3" exhaust, 3.91, tuned by Fasterproms 745 rwhp, 620 rwtq 2012 Silverado 3500HD SRW Duramax/Allison, 540 rwhp, 1100 rwtq. Last edited by sstampa; 05-30-2013 at 11:41 AM.

04-26-2013, 08:27 PM	#3
RJT-SS Drives: '11 2SS/RS A6 Join Date: Apr 2011 Location: New Orleans Posts: 504	Would you post a pic of the engine cover? __________________ Performance Mods: Kooks 1-7/8 LTs; Calico coated w/HFCs, Solo Mach XL catback w/J-pipes, VMax TB, C.A.I. Intake, JRE Tune, RX Catch-Can

04-27-2013, 06:56 AM	#7
sstampa Drives: 2011 2SS/RS RJT Join Date: Aug 2010 Location: tampa, fl Posts: 166	I have no idea if it made a difference, since I had everything that is currently for sale installed at once and dyno tuned. I made 416 rwhp on a hot July day. I'm guessing 5 hp. No issues with charging or cooling. Since your in Tampa, you could have Matt install the pulley as soon as it comes off my car. I have no idea how much it would cost, but it's not a big job. I did the install myself and it took me 2 hours, but I'm not a professional. __________________ Todd Downing 2011 2SS/RS LS3/M6 RJT, GFX, ECS Blower, FSP Blower Cam, SW 2" headers/3" exhaust, 3.91, tuned by Fasterproms 745 rwhp, 620 rwtq 2012 Silverado 3500HD SRW Duramax/Allison, 540 rwhp, 1100 rwtq.

04-27-2013, 07:03 AM	#8
sstampa Drives: 2011 2SS/RS RJT Join Date: Aug 2010 Location: tampa, fl Posts: 166	Just so everyone interested knows, first in line will be the first to commit to a each part that is local, so I don't have to ship. If no one local wants a particular part, I'll sell to the first person in line that I have to ship to. Assuming the parts come off without a hitch, everything will be in very good shape, as these are all low mile parts. __________________ Todd Downing 2011 2SS/RS LS3/M6 RJT, GFX, ECS Blower, FSP Blower Cam, SW 2" headers/3" exhaust, 3.91, tuned by Fasterproms 745 rwhp, 620 rwtq 2012 Silverado 3500HD SRW Duramax/Allison, 540 rwhp, 1100 rwtq.

04-27-2013, 02:07 PM	#9
Nutro Drives: 2011 2SS Synergy Green Join Date: Nov 2011 Location: Austin, Texas Posts: 3,670	Does anyone want just the CAI intake? I'd like to buy just scoop and washer relocate as mentioned in our PM. __________________ L99 With a Maggie

04-26-2013, 07:01 PM	#2
robi523 Drives: 2010 SS, no mods yet Join Date: Sep 2011 Location: Philadelphia Posts: 85	If you decide to ship I want the intake please... or I will pick it up if I happen to get a trip to the area.

04-26-2013, 09:50 PM	#4
bombton_1le Drives: 2013 Camaro 2SS/RS 1LE Join Date: Apr 2013 Location: CPT, CA Posts: 33	Pm sent

04-26-2013, 10:14 PM	#5
Thapilot Drives: 2010 2SS Black Twice Join Date: Dec 2011 Location: DFW Posts: 110	Underdrive Pulley Kit for me...PM sent as well.

04-27-2013, 05:32 AM	#6
Abrahams11SS Drives: 2013 ZL1 V3RT Join Date: Feb 2012 Location: Tampa FL Posts: 804	Selling everything since you're going big time huh?? Nice. I may have to take that underdrive kit off your hands. Did that make a big difference ?

04-27-2013, 02:31 PM	#10
StangKiller-SS Drives: GM products Join Date: Apr 2009 Location: USA Posts: 1,621	PM sent!

04-27-2013, 07:27 PM	#11
sstampa Drives: 2011 2SS/RS RJT Join Date: Aug 2010 Location: tampa, fl Posts: 166	Engine cover pics. Cover was pulled at around 2000 miles. Excellent condition, no scratches. __________________ Todd Downing 2011 2SS/RS LS3/M6 RJT, GFX, ECS Blower, FSP Blower Cam, SW 2" headers/3" exhaust, 3.91, tuned by Fasterproms 745 rwhp, 620 rwtq 2012 Silverado 3500HD SRW Duramax/Allison, 540 rwhp, 1100 rwtq. Last edited by sstampa; 04-27-2013 at 07:41 PM.

04-27-2013, 07:30 PM	#12
GYac Drives: 2010 2SS Join Date: Mar 2013 Location: AA CO, MD Posts: 256	PM sent for tips __________________ 2010 RS/SS - C.A.I Intake, Muffler Delete, Skip Shift, VMAX TB

04-27-2013, 07:34 PM	#13
sstampa Drives: 2011 2SS/RS RJT Join Date: Aug 2010 Location: tampa, fl Posts: 166	MBRP GFX Rectangular tip pictures. These are a second pair of tips that are not currently installed on the car. They have some blemishes, shown in the pictures. Some marks from rubbing the top of the GFX exhaust bezel and the rolled edges on this set are not perfect (manufacturing issue). I will let this set go for $30 plus shipping due to the issues. However, they do look good on the car and the marks will not show as long as they are not installed sticking out of the bezels. These fit 3" exhaust only. The other set is in much better condition and the rolled edges are good. Will post those pics when exhaust is pulled. Rub Marks Rolled edge imperfections __________________ Todd Downing 2011 2SS/RS LS3/M6 RJT, GFX, ECS Blower, FSP Blower Cam, SW 2" headers/3" exhaust, 3.91, tuned by Fasterproms 745 rwhp, 620 rwtq 2012 Silverado 3500HD SRW Duramax/Allison, 540 rwhp, 1100 rwtq.

04-27-2013, 07:45 PM	#14
GYac Drives: 2010 2SS Join Date: Mar 2013 Location: AA CO, MD Posts: 256	How much shipped for the tips to 20764 __________________ 2010 RS/SS - C.A.I Intake, Muffler Delete, Skip Shift, VMAX TB