07-26-2013, 03:56 PM | #1 |
Drives: 2012 camaro ls/rs Join Date: Apr 2013
Location: Connecticut
Posts: 77
|
ported throttle body
installed a vmax ported throttle body today on my camaro, all i can say is WOW, i dont care too much for the horsepower gains, but my car sounds so much nicer, i didnt think it was possible to sound better than it already was. took all of 20 minutes to install and that included me dropping one of the screws going to the hardware store to get a new screw. im not sure whether to just finish the performance next with the high flow cats and a tune or to work on some visuals, such as a new head unit, 4 pack gauges, and lowering it
got the throttle body from apex, amazing customer service, really fast delivery |
07-26-2013, 04:12 PM | #2 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
Congrats. They are a great bang for the buck!
Best regards, Tyler 888-308-6007 |
07-26-2013, 05:52 PM | #3 |
Drives: 2012 LS M6, Black Join Date: May 2009
Location: Phoenix, AZ
Posts: 2,045
|
I don't remember any change in sound from installing mine, nor did I expect/get/notice any HP gain, but it sure made throttle response a lot smoother.
John B.
__________________
12 LS M6, IPF S/C, ASA GT-5 wheels, VMax PTB
1995 Mitsubishi Montero SR 1987 Dodge Raider Turbo Project 1986 Mitsubishi Montero 2.4l FI Transplant |
07-26-2013, 06:36 PM | #4 |
Drives: 2012 Summit White 1Ls Join Date: Jan 2012
Location: Diamond Bar, Cali
Posts: 898
|
You drive an ls/rs? Post some pics
|
07-26-2013, 08:55 PM | #5 |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
Wait, so where did the lost bolt end up!?
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear |
07-26-2013, 09:01 PM | #6 |
Drives: 2012 camaro ls/rs Join Date: Apr 2013
Location: Connecticut
Posts: 77
|
everyone knows what the LS looked like stock. with the steel wheels and all.. pretty much what ive done to it so far with the year i had it, is a K&N cold air intake, vmax throttle body, pacesetter catback exhaust, kenwood subwoofer, RX catch can, tinted the windows, smoked the taillights, put the SS wheels on it, lights in the footwell and lights inside the shifter and put in fog lights and black out the bowties on both the front and the back
|
07-26-2013, 09:02 PM | #7 |
Drives: 2012 camaro ls/rs Join Date: Apr 2013
Location: Connecticut
Posts: 77
|
|
07-26-2013, 09:03 PM | #8 |
Drives: 2012 camaro ls/rs Join Date: Apr 2013
Location: Connecticut
Posts: 77
|
i apologize for the sideways pictures not sure why they are like that
|
07-26-2013, 09:10 PM | #9 | |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
Quote:
|
|
07-26-2013, 09:11 PM | #10 |
Drives: 2013 zl1 m6 Join Date: Jul 2011
Location: Williamsport,IN
Posts: 915
|
Cheapest HP part U can buy
For HP to $ ratio
__________________
2013 ZL1 M6 black on black 10 spokes
592rwhp 616rwtq bolt ons only www.mikenorrismotorsports.com Www.lgmotorsports.com |
07-26-2013, 09:11 PM | #11 |
Drives: 2013 zl1 m6 Join Date: Jul 2011
Location: Williamsport,IN
Posts: 915
|
Cheapest HP part U can buy
For HP to $ ratio
__________________
2013 ZL1 M6 black on black 10 spokes
592rwhp 616rwtq bolt ons only www.mikenorrismotorsports.com Www.lgmotorsports.com |
07-26-2013, 09:14 PM | #12 |
Drives: 2012 camaro ls/rs Join Date: Apr 2013
Location: Connecticut
Posts: 77
|
|
07-26-2013, 09:14 PM | #13 |
Drives: 2012 camaro ls/rs Join Date: Apr 2013
Location: Connecticut
Posts: 77
|
|
07-26-2013, 10:29 PM | #14 |
Go Gators!
Drives: Camaro Jeep Abarth 944 325i Join Date: Jan 2013
Location: CT
Posts: 844
|
I only ask that because as an airplane mechanic we have to find ANYTHING that is "lost," and it really sucks sometimes.... But we always find it of course! Don't want you guys being afraid to fly
I try to do the same on my car just in case, never know what a lost bolt could do rolling around in an engine bay.
__________________
'13 Camaro, '97 Wrangler, '12 500 Abarth, '85.5 944, '06 325i
Suspension Mods: BMR and JPSS Sways, BMR Poly Bushings, BMR strut tower brace, BMR control arms, BMR toe arms, stock springs and struts Engine Mods: All bolt ons (haha) Brake Mods: Brembo SS caliper swap front and rear |
|
|
|
|