04-30-2013, 06:27 PM | #1 |
Flying da helicopter
|
Check Engine Light Help
On my way home I got a check engine light, so I stopped by AutoZone to get the code checked. It came up with P1153-heated oxygen sensor Bank 2 sensor 1 (H02S21) insufficient switching.
To me that means the 02 sensor may be going bad??? Any ideas what may be going on? I have long tubes with high flow cats so I have the extended cords for the sensors. Any help would be appreciated. Thanks |
04-30-2013, 06:46 PM | #2 |
PHAT B33
Drives: 2012 TF3 Camaro 2SS/RS M6 Join Date: Jun 2012
Location: Dark of the Moon
Posts: 1,460
|
Typical of HFC's or no cats and headers. Reset the code and add O2 extenders or disable the codes in the tune.
__________________
Another 1 of 371 '12 T3 LS3 M6's built.
|
04-30-2013, 07:06 PM | #3 |
Flying da helicopter
|
I have the extenders on already. I haven't had problems in a year. I will reset it and see if it comes back. Thanks
|
04-30-2013, 07:54 PM | #4 |
Account Suspended
Drives: TAMPA TUNING FACEBOOK & INSTAGRAM Join Date: Oct 2010
Location: Tampa, Fl
Posts: 3,044
|
The below thread will save me writing again
http://www.camaro5.com/forums/showthread.php?t=291226 Phil |
04-30-2013, 08:20 PM | #5 |
Flying da helicopter
|
Thanks
|
05-01-2013, 09:49 AM | #6 |
PHAT B33
Drives: 2012 TF3 Camaro 2SS/RS M6 Join Date: Jun 2012
Location: Dark of the Moon
Posts: 1,460
|
My bad, it's the sensor 1 codes you posted. Reading > me. I was thinking the rears.
__________________
Another 1 of 371 '12 T3 LS3 M6's built.
|
05-01-2013, 11:47 AM | #7 |
Flying da helicopter
|
no worries, thanks for the help
|
|
|
|
|