20" Mesh wheels? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nardox · 11-20-2010, 12:12 AM

I'm trying to find some 20 inch mesh wheels with lips. Similar style like the Savini SV25 and 360Forged Mesh Ten. (Pictured below)

However the Savini and 360Forged ones are over my budget. I'm looking to spend around $800 per wheels.

What are the best quality wheels that I can get for $800/wheel?

Nine Ball · 11-20-2010, 06:20 AM

$800 per wheel is plenty to work with. I'm also in the Houston area, would like to work with you on this.

I can get you into any set of these iForged 2-piece forged (20x8.5 and 20x10), as shown with the brushed centers, for just under your budget. They won't have the huge lip shown below, but they will have the normal lip fitment for a Camaro. These are the best bang for the buck in terms of price vs quality, in my opinion.

Tony

Jay J · 11-20-2010, 07:56 AM

800 per wheel for a mesh design?
Work VSXX's or Work VSXX's with a step lip are always nice

nardox · 11-21-2010, 11:13 PM

Quote:

Originally Posted by Nine Ball

$800 per wheel is plenty to work with. I'm also in the Houston area, would like to work with you on this.

I can get you into any set of these iForged 2-piece forged (20x8.5 and 20x10), as shown with the brushed centers, for just under your budget. They won't have the huge lip shown below, but they will have the normal lip fitment for a Camaro. These are the best bang for the buck in terms of price vs quality, in my opinion.

Tony

Thanks for the reply Tony
The wheel in the first pic looks great, but I really want something with a few extra spokes, like the iForged Essen or Emotion, do you carry those styles?
and btw how much extra does it cost to get black instead of brushed center?

Jay J · 11-22-2010, 06:46 AM

http://www.workwheelsusa.com/product...y=44&wheel=126 There's that akin to a BBS LM but a bit different..

http://www.workwheelsusa.com/product...y=44&wheel=125

http://www.workwheelsusa.com/product...ry=26&wheel=75 - I <3 those I've had like 2 sets of them before

...

http://www.vipmodular.com/v3/wheels these are also nice too....

Also the I forged for under 800 per is a good deal...
The Emotions will be a bit more as they are 3 piece. (which isn't a bad thing) If you damage the outer lip or inner you can replace either piece as opposed to the whole barrel.

There's also a con; if you take to a place that does not know how to mount and balance low profile wheels/ tires and they mount it using the bead as a lever point...I've seen wheels leaking many a times due to that...

The essens will be a bit less as they are 2 piece....

I have run all 3 without any issues before. 2 piece; 2 piece welded; and 3 Piece....

D2-AUTOSPORT · 11-22-2010, 11:33 AM

We are listed on Work wheels site as a distributor, let us know if you need pricing.

Nine Ball · 11-22-2010, 12:47 PM

Quote:

Originally Posted by nardox

Thanks for the reply Tony
The wheel in the first pic looks great, but I really want something with a few extra spokes, like the iForged Essen or Emotion, do you carry those styles?
and btw how much extra does it cost to get black instead of brushed center?

I can get any iForged wheel. Essen/Emotion will be a tiny bit more than the Race Series above, but about the same. Black centers are a standard finish, so knock off $300 if you can live without brushed centers. Standard center finishes for iForged are polished, silver, matte black, gloss black, gunmetal gray, with a polished lip.

CamaroDreams07 · 11-22-2010, 03:28 PM

Some of those VIP wheels look great. I take it they cost an arm and a leg?

ISSForged · 11-23-2010, 05:25 PM

These ISS Forged styles are also available:

or MultiSpoke

Dont mind the crazy colors - All 3piece / HubCentric Made to fit and can be built with Straight lip or Step Lip.

jamesc1123 · 11-23-2010, 07:55 PM

You could hold out for Forgeline's next big sale...they've got some awesome wheels.

Speed Depot · 11-24-2010, 09:25 AM

Check out the Forza Forged FRZ-950, 9.5" front with a 2-1/2" lip and 11" rear with a 4" lip. Let me know what you think.

Name: forza-frz950.jpg
Views: 3148
Size: 36.5 KB

Name: forza-frz950.jpg
Views: 3148
Size: 36.5 KB

Petersimov · 11-24-2010, 12:38 PM

wow those are nice ^^^^^^^^ can u get them in 20s and black

themossman · 11-24-2010, 02:54 PM

Quote:

Originally Posted by ISSForged

These ISS Forged styles are also available:

Dont mind the crazy colors - All 3piece / HubCentric Made to fit and can be built with Straight lip or Step Lip.

I saw a guy last week with ISS wheels that were 5 spoke and appeared to be singled piece...but I cant find them on your site. Do you make a 5 spoke single piece wheel?

COR Forged · 11-24-2010, 04:29 PM

Send Tony a PM or give him a shout. I just sent him over some new pricing on some wheels I have in stock as well as some GREAT holiday pricing. Take advantage the pricing won't last too long.

11-20-2010, 12:12 AM	#1
nardox Drives: 2015 Camaro Z/28 Join Date: Aug 2010 Location: Houston Posts: 294	20" Mesh wheels? I'm trying to find some 20 inch mesh wheels with lips. Similar style like the Savini SV25 and 360Forged Mesh Ten. (Pictured below) However the Savini and 360Forged ones are over my budget. I'm looking to spend around $800 per wheels. What are the best quality wheels that I can get for $800/wheel?

11-20-2010, 06:20 AM	#2
Nine Ball Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008 Location: Houston, TX Posts: 3,849	$800 per wheel is plenty to work with. I'm also in the Houston area, would like to work with you on this. I can get you into any set of these iForged 2-piece forged (20x8.5 and 20x10), as shown with the brushed centers, for just under your budget. They won't have the huge lip shown below, but they will have the normal lip fitment for a Camaro. These are the best bang for the buck in terms of price vs quality, in my opinion. Tony __________________ Fquick.com/NineBall

11-22-2010, 03:28 PM	#8
CamaroDreams07 Drives: Slow V6 Join Date: Jun 2009 Location: East Lansing, MI Posts: 9,361 View My Garage	Some of those VIP wheels look great. I take it they cost an arm and a leg? __________________ [B]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ok, I now have my wheels :D	PQ	Wheels and Tires Talk Sponsored by The Tire Rack	722	12-18-2010 11:13 PM
Stocked Polished 20" SS Wheels for Great Price!	Sketti	Wheels / Tires	0	08-24-2010 05:43 PM
Price Reduced! - FS - 20" Staggered OEM Polished Wheels	C5Pilot	Wheels / Tires	2	08-09-2010 06:53 PM
SLP Black Painted Wheels With Machined Face 20" x 8" / 20" x 9"	tbyrne	Wheels / Tires	9	01-18-2010 11:41 AM

11-20-2010, 07:56 AM	#3
Jay J Prince of Zamunda Drives: XW30 Join Date: May 2010 Location: Torrance Posts: 511	800 per wheel for a mesh design? Work VSXX's or Work VSXX's with a step lip are always nice

11-22-2010, 06:46 AM	#5
Jay J Prince of Zamunda Drives: XW30 Join Date: May 2010 Location: Torrance Posts: 511	http://www.workwheelsusa.com/product...y=44&wheel=126 There's that akin to a BBS LM but a bit different.. http://www.workwheelsusa.com/product...y=44&wheel=125 http://www.workwheelsusa.com/product...ry=26&wheel=75 - I <3 those I've had like 2 sets of them before ... http://www.vipmodular.com/v3/wheels these are also nice too.... Also the I forged for under 800 per is a good deal... The Emotions will be a bit more as they are 3 piece. (which isn't a bad thing) If you damage the outer lip or inner you can replace either piece as opposed to the whole barrel. There's also a con; if you take to a place that does not know how to mount and balance low profile wheels/ tires and they mount it using the bead as a lever point...I've seen wheels leaking many a times due to that... The essens will be a bit less as they are 2 piece.... I have run all 3 without any issues before. 2 piece; 2 piece welded; and 3 Piece....

11-22-2010, 11:33 AM	#6
D2-AUTOSPORT Drives: Corvette C5 Join Date: Oct 2010 Location: New York Posts: 427	We are listed on Work wheels site as a distributor, let us know if you need pricing.

11-23-2010, 05:25 PM	#9
ISSForged Drives: Fast Join Date: Aug 2009 Location: Miami Posts: 18	These ISS Forged styles are also available: or MultiSpoke Dont mind the crazy colors - All 3piece / HubCentric Made to fit and can be built with Straight lip or Step Lip.

11-23-2010, 07:55 PM	#10
jamesc1123 Drives: CGM 2SS RS w/ white stripes Join Date: Jul 2008 Location: Clarksville, TN Posts: 183 View My Garage	You could hold out for Forgeline's next big sale...they've got some awesome wheels.

11-24-2010, 09:25 AM	#11
Speed Depot Drives: 2010 Camaro Join Date: Nov 2009 Location: Ft. Lauderdale, Florida Posts: 1,442	Check out the Forza Forged FRZ-950, 9.5" front with a 2-1/2" lip and 11" rear with a 4" lip. Let me know what you think.

11-24-2010, 12:38 PM	#12
Petersimov Drives: 2ss Join Date: Oct 2009 Location: Joliet IL Posts: 250	wow those are nice ^^^^^^^^ can u get them in 20s and black

11-24-2010, 04:29 PM	#14
COR Forged Drives: SS Join Date: Jun 2009 Location: Miami, FL Posts: 383	Send Tony a PM or give him a shout. I just sent him over some new pricing on some wheels I have in stock as well as some GREAT holiday pricing. Take advantage the pricing won't last too long.