--->>MY HOT NEW CHEVY LOGO ON TIRE WHEELS !!!<<<---

[dxy2jbaby]

Type of material: Vinyl

Installing time: 2mins

Brand: Avery

Durability: 6 years Guarantee

Installing tips: I used a sharp knife tip then put the vinyl on top of it , easily match it up with the logo. The size of vinyls are exact size no need to trim. Be sure the surface is clean n dry.

Q.Are you selling them? If so what colors do you have it available ?
A. I've been in the vinyl business for 9 years, pretty much any colors will be available. PM to double check the color.

Q. How much are you selling them?
A. Due to forum rules I cannot directly post it . However I'll give you hint
A stick plus one egg , for shipping There is a song by Chris brown- Duces (Personal i listen to it often)
If you don't get it please PM for pricing .

Q. It looks small, are people going to notice it?
A. Not really, All factory Wheel comes with plain color , even with my SS .
That little color will change the look overall . Every little thing count

[buzzy56]

Kinda like them myself. Just put them on last week.Just cleaned with alcohol & put them on.Nice improvement. Now go clean those tires up and make those bow ties proud !

[dxy2jbaby]

Originally Posted by buzzy56

Kinda like them myself. Just put them on last week.Just cleaned with alcohol & put them on.Nice improvement. Now go clean those tires up and make those bow ties proud !

Ha... I know right . at first i thought it was so small . But when i put on i see instant change

[Autobots]

Do you have or make the rear blackout? The full kit that looks like the ssx?

[dxy2jbaby]

Originally Posted by Autobots

Do you have or make the rear blackout? The full kit that looks like the ssx?

Yes i can , if you able to provide the pictues

[dxy2jbaby]

Originally Posted by Autobots

Do you have or make the rear blackout? The full kit that looks like the ssx?

Actually i'm gonna do the front logo with black but redish as outline over the weekend lol

[Autobots]

There is a blackout for just between the tail lights but I would like a full blackout like the ssx. I have found a kit or two but the ones I have found dont have the flat area around the tail lights done

[Autobots]

Like this one the yellow area around the tail lights just dont look right imo

[dxy2jbaby]

Originally Posted by Autobots

Like this one the yellow area around the tail lights just dont look right imo

I can cover that part up easily but since i cannot see your car physically . you need to take the measurement for me , and unfortunately i cannot test the vinyl on them . However what i can do is get you 3-4 different sizes of that is close to the measurement you going to me . you would have to play around with it for few minutes

That 's what happen to tire wheel logo , it has the length of 1.5 inches , i printed out 1.45 didn't work then 1.47 worked

[dxy2jbaby]

Originally Posted by Autobots

Like this one the yellow area around the tail lights just dont look right imo

or rip off the whole part , i'll provide you brand new one . that way i can take the measurement from my car . it will be perfect fit