PQs Camaro [COTW 9/20/10] - Page 262 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

*SSE 4 2SS* · 07-12-2012, 11:17 AM

R. I admire your courage and ability to jump in and do stuff... I'm not one to take trim stuff apart... It usually never goes back together right... Now, give me a 4" bolt that torques to 55000 ft/lbs, I'm in.. but this little plastic stuff... nah...

PQ · 07-12-2012, 11:20 AM

Quote:

Originally Posted by SSE 4 2SS

R. I admire your courage and ability to jump in and do stuff... I'm not one to take trim stuff apart... It usually never goes back together right... Now, give me a 4" bolt that torques to 55000 ft/lbs, I'm in.. but this little plastic stuff... nah...

The door panels are the only thing I've felt funky about doing. Had to gring the fasteners off and use screws in the short holes. PITA

Dude, Camaro5 (and other forums) are a godsend. I couldn't have done much of what I have from suspension to the blower and all in between without this invaluable tool. AND the members who are so willing to help. I try to repay the community the best I can.

Ivan @ Southwest Speed · 07-12-2012, 11:21 AM

Emma....Speedo and Tach are as easy/easier than the Aux setup!

Get em here!

Free logo and text still a go for C5ers!
Ivan

Ivan @ Southwest Speed · 07-12-2012, 11:22 AM

Quote:

Originally Posted by SSE 4 2SS

R. I admire your courage and ability to jump in and do stuff... I'm not one to take trim stuff apart... It usually never goes back together right... Now, give me a 4" bolt that torques to 55000 ft/lbs, I'm in.. but this little plastic stuff... nah...

Funny how that works right??? Plastic stuff never goes back the way that steel will does it?

Thank you again Randy!
Ivan

Darth_Emma · 07-12-2012, 11:26 AM

Ivan,
You coming to the fest? You can put them in for me!

Dangeruss · 07-12-2012, 11:32 AM

Quote:

Originally Posted by PQ

Dude, Camaro5 (and other forums) are a godsend. I couldn't have done much of what I have from suspension to the blower and all in between without this invaluable tool. AND the members who are so willing to help. I try to repay the community the best I can.

Just think...without C5 you would have all your fingers!

Quote:

Originally Posted by Ivan @ Southwest Speed

Emma....Speedo and Tach are as easy/easier than the Aux setup!

Get em here!

Free logo and text still a go for C5ers!
Ivan

Ivan...how long will the free logo and text offer go? I'm going to start on my interior soon, and would like to do something custom.

PQ · 07-12-2012, 11:40 AM

Quote:

Originally Posted by Dangeruss

Just think...without C5 you would have all your fingers!

This is true.

dianeokie · 07-12-2012, 11:49 AM

Quote:

Originally Posted by SSE 4 2SS

R. I admire your courage and ability to jump in and do stuff... I'm not one to take trim stuff apart... It usually never goes back together right... Now, give me a 4" bolt that torques to 55000 ft/lbs, I'm in.. but this little plastic stuff... nah...

That plastic stuff likes to snap in two :(

Quote:

Originally Posted by PQ

The door panels are the only thing I've felt funky about doing. Had to gring the fasteners off and use screws in the short holes. PITA

Dude, Camaro5 (and other forums) are a godsend. I couldn't have done much of what I have from suspension to the blower and all in between without this invaluable tool. AND the members who are so willing to help. I try to repay the community the best I can.

Randy, you're the bomb!

Quote:

Originally Posted by Ivan @ Southwest Speed

Emma....Speedo and Tach are as easy/easier than the Aux setup!

Get em here!

Free logo and text still a go for C5ers!
Ivan

Why do I keep coming here and adding to my "wish list"?

Ivan @ Southwest Speed · 07-12-2012, 11:55 AM

Quote:

Originally Posted by Dangeruss

Ivan...how long will the free logo and text offer go? I'm going to start on my interior soon, and would like to do something custom.

For C5ers? Prolly as long as they are continuing to order and keep it flowing!

Quote:

Originally Posted by dianeokie

Why do I keep coming here and adding to my "wish list"?

Sorry...LOL Prolly since we try harder than everybody else and are fair at what we offer?? Just a guess.

Thanks
Ivan

PQ · 07-12-2012, 12:03 PM

Quote:

Originally Posted by Darth_Emma

Ivan,
You coming to the fest? You can put them in for me!

He must have missed this.

I'll do it. I'd be totally stoked to have been a part of Smaug like that.

*SSE 4 2SS* · 07-12-2012, 12:44 PM

Quote:

Originally Posted by PQ

He must have missed this.

I'll do it. I'd be totally stoked to have been a part of Smaug like that.

T, If PQ is installing them... don't forget to bring a bag of Pretzels.... PQ needs consistent environmental conditions... Throw a bag of marshmellows under there and he'll break a toe or something...

Darth_Emma · 07-12-2012, 12:47 PM

Quote:

Originally Posted by SSE 4 2SS

T, If PQ is installing them... don't forget to bring a bag of Pretzels.... PQ needs consistent environmental conditions... Throw a bag of marshmellows under there and he'll break a toe or something...

I'd love those gauge faces, but I just can't quite justify $225 for them. I can get my new rear brake rotor for that...

However, I could Photoshop a set for myself and print them on my inkjet.

*SSE 4 2SS* · 07-12-2012, 12:56 PM

Quote:

Originally Posted by Darth_Emma

I'd love those gauge faces, but I just can't quite justify $225 for them. I can get my new rear brake rotor for that...

However, I could Photoshop a set for myself and print them on my inkjet.

Believe me, I went and looked at them.. hard... but having spent as much for the trailer, the supplies for the trailer, the stuff for the truck, the stuff for Brandi etc... I'ma hold off for now...

Darth_Emma · 07-12-2012, 12:57 PM

Quote:

Originally Posted by SSE 4 2SS

Believe me, I went and looked at them.. hard... but having spent as much for the trailer, the supplies for the trailer, the stuff for the truck, the stuff for Brandi etc... I'ma hold off for now...

The guys are IPS are encouraging me to get a trailer too...

07-12-2012, 11:17 AM	#3655
SSE 4 2SS Boosted Moderator Drives: Bone Stock LS3 Join Date: Sep 2009 Location: Marion Tx Posts: 15,492	R. I admire your courage and ability to jump in and do stuff... I'm not one to take trim stuff apart... It usually never goes back together right... Now, give me a 4" bolt that torques to 55000 ft/lbs, I'm in.. but this little plastic stuff... nah... __________________ If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM unveils Jay Leno Camaro, Camaro Synergy, Camaro Chroma, Camaro Dusk at SEMA	irocnroll	5th Gen Camaro SS LS LT General Discussions	101	02-27-2012 12:25 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
The DEFINITIVE EXPLANATION OF CAMARO SUSPENSION, ISSUES, AND UPGRADES	Info@PeddersUSA.com	Suspension / Brakes / Chassis	106	10-19-2009 06:08 PM
Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	338	04-15-2009 05:33 PM

07-12-2012, 11:21 AM	#3657
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	Emma....Speedo and Tach are as easy/easier than the Aux setup! Get em here! Free logo and text still a go for C5ers! Ivan

07-12-2012, 11:26 AM	#3659
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	Ivan, You coming to the fest? You can put them in for me!