2010 - 2013 RS Halo Assembly Pictures Wanted - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

murf24 · 11-18-2016, 08:31 PM

Does anyone have a good picture of the halo headlight assembly? I'm looking into adding a color change option but I don't want to hack it up like the Oracle halo kit. I don't mind baking it open but I don't want to hacksaw the halo. I think there are options out there that do not require the LED ring. Any pictures, help or advise on this would be greatly appreciated. Thanks.

PDXSSCE · 11-23-2016, 11:55 PM

Quote:

Originally Posted by murf24

Does anyone have a good picture of the halo headlight assembly? I'm looking into adding a color change option but I don't want to hack it up like the Oracle halo kit. I don't mind baking it open but I don't want to hacksaw the halo. I think there are options out there that do not require the LED ring. Any pictures, help or advise on this would be greatly appreciated. Thanks.

GVA 45TH 2SS · 11-24-2016, 04:41 PM

I would look at NightOwl LEDs
https://nightowlleds.com/

No baking or cutting required

Maiden69 · 11-25-2016, 05:11 PM

http://www.diodedynamics.com/store/c...category/1451/

I have been swapping emails with Steve, and I think this is a great option. I am going other route, as I don't care much for color changing, just a more powerful and dimmable cool white set up. Just take the headlights out, open the bottom access port, carefully unscrew the LED heatsink, and swap the OEM LED, for the RGBW (get the RGBW instead of an RGB... the white, will never be white on RGB, close, but not the same) board. For the price, DD can't be beat on this one unless you build your own set up as I am.

murf24 · 12-11-2016, 09:26 PM

Maiden69, Thanks man!! This is exactly what I was looking for! I'm going with the DD solution.

SynergyGreenSS · 12-11-2016, 11:00 PM

NIGHT OWL!! I did it all myself. Very straightforward. Feel free to pm me with any questions

grahak2 · 12-12-2016, 02:37 AM

Hi,

Here is a picture of the assembly diagram

http://www.wholesalegmpartsonline.co.../92240994.html

Thanks,
Kevin

Buckeye · 12-12-2016, 03:42 PM

Quote:

Originally Posted by GVA 45TH 2SS

I would look at NightOwl LEDs
https://nightowlleds.com/

No baking or cutting required

I also installed the NightOwl system and found it easy to install. It is controlled from my iPhone.

11-18-2016, 08:31 PM	#1
murf24 Drives: 2012 RS Join Date: Apr 2016 Location: Reading, PA Posts: 14 View My Garage	2010 - 2013 RS Halo Assembly Pictures Wanted Does anyone have a good picture of the halo headlight assembly? I'm looking into adding a color change option but I don't want to hack it up like the Oracle halo kit. I don't mind baking it open but I don't want to hacksaw the halo. I think there are options out there that do not require the LED ring. Any pictures, help or advise on this would be greatly appreciated. Thanks. Last edited by murf24; 11-20-2016 at 09:58 PM.

12-11-2016, 11:00 PM	#6
SynergyGreenSS Drives: 2011 2SS Join Date: Mar 2015 Location: Arlington, Texas Posts: 1,333	NIGHT OWL!! I did it all myself. Very straightforward. Feel free to pm me with any questions __________________ 2011 SS L99 LSA Supercharger, BTR Stage 3 PDS Cam, Yank 3200SS, Weapon X Stage 2 intake, LSA Heads, Flex Fuel, Ported throttle body, Speed Engineering Headers, NOWEEDS, ZL1 fuel pump, DSX AUX Pump, ID-1050X injectors, 3” pipe to NPP mufflers, 3.91 gears

12-12-2016, 02:37 AM	#7
grahak2 Drives: 2021 scatpack challenger 6spd cinna Join Date: Oct 2015 Location: AZ Posts: 427	Hi, Here is a picture of the assembly diagram http://www.wholesalegmpartsonline.co.../92240994.html Thanks, Kevin Attached Images

11-24-2016, 04:41 PM	#3
GVA 45TH 2SS KNGTFALL Drives: 2012 2SS 45th edition Join Date: Aug 2012 Location: (Near) Charlotte, NC Posts: 1,533	I would look at NightOwl LEDs https://nightowlleds.com/ No baking or cutting required

11-25-2016, 05:11 PM	#4
Maiden69 Drives: 2020 Orange Crush 1SS/1LE Join Date: Jun 2016 Location: Boerne Posts: 150	http://www.diodedynamics.com/store/c...category/1451/ I have been swapping emails with Steve, and I think this is a great option. I am going other route, as I don't care much for color changing, just a more powerful and dimmable cool white set up. Just take the headlights out, open the bottom access port, carefully unscrew the LED heatsink, and swap the OEM LED, for the RGBW (get the RGBW instead of an RGB... the white, will never be white on RGB, close, but not the same) board. For the price, DD can't be beat on this one unless you build your own set up as I am.

12-11-2016, 09:26 PM	#5
murf24 Drives: 2012 RS Join Date: Apr 2016 Location: Reading, PA Posts: 14 View My Garage	Maiden69, Thanks man!! This is exactly what I was looking for! I'm going with the DD solution.