OE Quiet Endlinks with Spherical Function - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JusticePete · 08-12-2011, 06:05 PM

Quote:

Originally Posted by Cyber Gray

Is it a must to buy part, for those who run on sport sway bar and OE endlinks?

That is a good question. Aside from the obvious points of the upgrade the biggest advantage of Pedders endlinks over OE is the adjustment in length. That is mission critical after corner weighting your 5th Gen.

In normal driving, even with aftermarket sway bars, you would be hard pressed to feel the difference between an endlink made of unobtainium and OE. If you track your car, or are a very agressive street driver then the answer would be yes.

JusticePete · 08-12-2011, 06:06 PM

Quote:

Originally Posted by Saving41

I just replaced another companies endlinks, while they worked as designed, I could not stand the "clank" when going over speed bumps (and yes all the bolts were torqued to spec). Very happy with the pedder's endlinks...so for me it was well worth it.

Thank you for the kind words. We appreciate your post and your business. Allow me to welcome you to the Pedders Nation!

JusticePete · 09-07-2011, 02:20 PM

Pedders Always Quite, Oversized Surface Area High Efficiency Endlinks for the most demanding Camaro 5 enthusiasts.

JusticePete · 10-27-2011, 01:32 AM

bump for smokay

Robbie1227 · 10-27-2011, 09:36 PM

Saw this post pop back up, and I have to say, even after 8 months and several road coarse track days, my Pedders OE end links are still super quiet at all angles, speeds, and bumps.
I recommend them to anyone having banging and popping suspension issues.

JusticePete · 11-12-2011, 12:38 PM

Quote:

Originally Posted by Robbie1227

Saw this post pop back up, and I have to say, even after 8 months and several road coarse track days, my Pedders OE end links are still super quiet at all angles, speeds, and bumps.
I recommend them to anyone having banging and popping suspension issues.

Thank you for the kind words

These high effeceincy OE quiet endlinks are the same endlinks we ran on the OPTIMA Challneg L/28. You know 5th Gen that was 8.5 seconds faster than any other 5th Gen Camaro

Bruce@raymondsperformance · 11-13-2011, 07:29 PM

Quote:

Originally Posted by JusticePete

Pedders Always Quite, Oversized Surface Area High Efficiency Endlinks for the most demanding Camaro 5 enthusiasts.

These sway bar links are the very best on the market IMO.Great performance and no noise.

JusticePete · 11-23-2011, 12:02 AM

Quote:

Originally Posted by Bruce@raymondsperformance

These sway bar links are the very best on the market IMO.Great performance and no noise.

JusticePete · 12-03-2012, 12:36 PM

This just in from PRI

GM and Pedders? No, Pedders does not make the GM Race Endlink. Pedders and GM do use the same ball joints. Two Great Great Companies Thinking the Same Way.

Rob@WretchedMS · 12-03-2012, 12:59 PM

JusticePete · 06-14-2013, 02:06 PM

for those with noisy or broken spherical endlinks

bigpunn03 · 09-25-2013, 11:12 PM

Quote:

Originally Posted by JusticePete

for those with noisy or broken spherical endlinks

I need both front and rear links for 2010 can you tell me where I can find on the website? Also do you sell bushings for OEM front Sway bar?

JusticePete · 09-26-2013, 12:18 PM

Quote:

Originally Posted by bigpunn03

I need both front and rear links for 2010 can you tell me where I can find on the website? Also do you sell bushings for OEM front Sway bar?

Our signature series parts are the best of the best. The part numbers are listed next to the description and picture. They are in stock and ready to ship.

Front with OEM 10mm Studs is CAM-SW-LINK-F-OE

Rear with OEM 10mm Studs is CAM3-SW-LINK-R-OE

JusticePete · 09-27-2013, 09:35 AM

Quote:

Originally Posted by bigpunn03

I need both front and rear links for 2010 can you tell me where I can find on the website? Also do you sell bushings for OEM front Sway bar?

Thank you for choosing JPSS endlinks for your Camaro!

10-27-2011, 09:36 PM	#61
Robbie1227 Drives: 2015 Camaro Z28/2016 Jeep Sahara Join Date: Mar 2010 Location: South Florida Posts: 544	Saw this post pop back up, and I have to say, even after 8 months and several road coarse track days, my Pedders OE end links are still super quiet at all angles, speeds, and bumps. I recommend them to anyone having banging and popping suspension issues. __________________ 2015 summit white Z28 #120 TRK DAY -Sun-Tek PPF-C protection film on 2/3 of the car, Moreno Camber plates, American Racing 2" ceramic coated LT headers and X-pipes with No Cats, Taylor red performance wires, NGK plugs, BTR Stage III Cam, MSD Atomic intake, Nick Williams 102mm throttle body, Stage 2 CNC Ported Heads by WCCH, MGW short throw shifter, oil catch can, and a dyno tune to get me to 587 RWHP and 516 RWTQ GONE: 2013 Summit White Camaro ZL1 M6 Roto-Fab CAI, Kooks headers and CAT delete, ATI damper and 10% pulley and balancer! Results: 576 RWHP - 540 RWTQ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 05:52 PM
Engine sounds so quiet	jagan323	5th Gen Camaro SS LS LT General Discussions	15	04-13-2010 11:22 PM
Pfadt Racing new Camaro Endlinks available NOW!	PfadtRacing	Suspension / Brakes / Chassis	28	03-22-2010 12:00 PM
LM Performance, Spohn Camaro 2010 Tubular Rear Trailing Arms w/ Spherical Rod Ends	LMPerformance	V8 Bolt-Ons & Tunes	0	10-19-2009 01:59 PM
LM Performance, Spohn Camaro 2010 Tubular Rear Toe Links with Spherical Rod Ends.	LMPerformance	V8 Bolt-Ons & Tunes	0	10-19-2009 01:44 PM

09-07-2011, 02:20 PM	#59
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	Pedders Always Quite, Oversized Surface Area High Efficiency Endlinks for the most demanding Camaro 5 enthusiasts.

10-27-2011, 01:32 AM	#60
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	bump for smokay

12-03-2012, 12:36 PM	#65
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	This just in from PRI GM and Pedders? No, Pedders does not make the GM Race Endlink. Pedders and GM do use the same ball joints. Two Great Great Companies Thinking the Same Way.

12-03-2012, 12:59 PM	#66
Rob@WretchedMS Drives: His Wife Crazy Join Date: Jan 2008 Location: Silas Deane Auto,CT Name: Rob Anderson Posts: 1,789

06-14-2013, 02:06 PM	#67
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	for those with noisy or broken spherical endlinks