ADM scoop + Apex washer relocate - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ksmoke · 07-24-2013, 03:46 PM

Got my CAI installed along with the ADM scoop and apex washer kit, following the directions from apex it said to mount the washer as high and far back as possible so I did that but now there is a bump into the wheel well that if the tires full right it will rub against. Anyone else have this problem? Is there enough room to move it forward without causing an issue with the fogs?

Kessler · 07-24-2013, 03:50 PM

Apex Motorsports · 07-24-2013, 04:06 PM

Quote:

Originally Posted by Ksmoke

Got my CAI installed along with the ADM scoop and apex washer kit, following the directions from apex it said to mount the washer as high and far back as possible so I did that but now there is a bump into the wheel well that if the tires full right it will rub against. Anyone else have this problem? Is there enough room to move it forward without causing an issue with the fogs?

There should be plenty of room to go forward if need be. As long as you are not crushing the wires behind the fog light you won't have any problems.

etmx183 · 07-25-2013, 05:41 AM

Worked out perfect on mine, no clearance issues. But there is some room to more things around a little if needed.

07-24-2013, 03:46 PM	#1
Ksmoke Drives: 2013 Camaro 1LT/RS Join Date: Jul 2013 Location: Massachusetts Posts: 313 View My Garage	ADM scoop + Apex washer relocate Got my CAI installed along with the ADM scoop and apex washer kit, following the directions from apex it said to mount the washer as high and far back as possible so I did that but now there is a bump into the wheel well that if the tires full right it will rub against. Anyone else have this problem? Is there enough room to move it forward without causing an issue with the fogs?

07-24-2013, 03:50 PM	#2
Kessler Drives: 2012 IOM 2LT RS A6 w/ BA Join Date: Apr 2013 Location: Central Valley, Ca Posts: 123	__________________ ToDones - Apex Scoop & Washer Relocate - CAI cai - Elite CC - Elite Clean Side Separator - MRT v1 Axle Back customized w/ J-Pipes - Black Out Headlight/Tail Light - Black Out BowTies - Black Out 'camaro' - Black Out Brake Light Chrome Bezel - JL Audio XD400/4 - Sub Thump Sub Box 2 DVC 10"s - HIFONICS ZEUS 1000.1 Escort Redline - VIOFO Dash Cam - Continental Extreme Contact Tires Gary's Customs ZL1 Front Bumper, ZL1 Rockers, & ZL1 Spoiler - Paint matched IOM OverKill 80mm T-body - JacFab Ported Intake Manifold - JacFab Extendolator 3/4" Spacer ToDos - Tune?

07-25-2013, 05:41 AM	#4
etmx183 Drives: 2012 Camaro 2LT RS Join Date: Mar 2012 Location: Baltimore, Maryland Posts: 1,633 View My Garage	Worked out perfect on mine, no clearance issues. But there is some room to more things around a little if needed.