Procharger install - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

805_LSTRES · 02-20-2024, 02:21 AM

I’m in the process of installing my procharger kit that I’ve been piecing together.
Have a few questions about the modified harmonic balancer.

1. Does the new balancer require a seal ? In the instructions it says to make sure there is a seal.

2. Does the new crank bolt require a cupped washer ? Per the instructions as well.

Thanks

JANNETTYRACING · 02-20-2024, 01:46 PM

Quote:

Originally Posted by 805_LSTRES

I’m in the process of installing my procharger kit that I’ve been piecing together.
Have a few questions about the modified harmonic balancer.

1. Does the new balancer require a seal ? In the instructions it says to make sure there is a seal.

2. Does the new crank bolt require a cupped washer ? Per the instructions as well.

Thanks

Seal and bolt should be replaced we stock them both www.jannettyracing.com

Ted.

805_LSTRES · 02-20-2024, 03:25 PM

Quote:

Originally Posted by JANNETTYRACING

Seal and bolt should be replaced we stock them both www.jannettyracing.com

Ted.

Hey Ted , I have a new bolt already just not sure on the “cupped washer “part for the crank bolt. and not sure which seal I need for the harmonic balancer. Is it the friction washer they are referring to in the instructions ? Thanks

02-20-2024, 02:21 AM	#1
805_LSTRES Drives: 2014 SS Camaro Join Date: Sep 2021 Location: Ventura,California Posts: 32	Procharger install I’m in the process of installing my procharger kit that I’ve been piecing together. Have a few questions about the modified harmonic balancer. 1. Does the new balancer require a seal ? In the instructions it says to make sure there is a seal. 2. Does the new crank bolt require a cupped washer ? Per the instructions as well. Thanks __________________ 2014 SS Camaro M6 ,D1sc Procharger 9lbs, Long tube headers , squash dual 450s E85, Tuned by New Era Performance. 611hp