09-28-2012, 07:43 PM | #1 |
Drives: 2012 Camaro RS Join Date: Sep 2012
Location: Chesapeake VA
Posts: 1
|
Low RPM vibrations 40 to 50 mph
I read a thread about the rumble strip feel to my 2012 2LT RS. I thought I was crazy until I found the service bulletin on this site from GM about it being the torque converter. Bulletin in hand i went to the dealer and explained this is exactly what my car was doing. They replaced my torque in 3 days and the car is back to performing correctly. My question is, are the replacement converters any different than the originals. Will I be having this same problem in another 8000 miles?
|
09-28-2012, 07:46 PM | #2 |
|
No you should be fine.
__________________
2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan,
Holley fuel rail, Proform valve covers, relocated coil packs |
09-28-2012, 09:31 PM | #3 |
|
I thing that the reason is [ was ] that the OEM transmissions were built in Mexico , and the replacement parts are fro Tijuana
|
|
|
|
|