Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 05-09-2012, 01:19 PM   #1
pyr0b0y
need....more....hp
 
pyr0b0y's Avatar
 
Drives: The Neighbor Hater
Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
OZMO Carbon Fiber Intake Manifold

I have been working with Jaime, the owner of OZMO Engineering on a one-off custom intake manifold for my twin turbo LS3 setup. The intake had to be redesigned to fit the LS3, as well as functional for an FI setup.

Some of you may have seen Blu808 post up about their experience with the NA intake manifold. You'll notice that this one has extremely short runners specifically designed for high horsepower FI cars. Instead of running 2 TBs, the two plenums converge into a single TB.

Here are a couple pictures of the progress since December

Plenums finished in carbon fiber


Runner back from the CNC



Installed in the plenums






As of right now 'm not sure how much of an increase in power to expect. They are truely a work of art! I've never seen anything close to this before.

I talked to Jaime this morning and he still needs to bond the BOVs to the plenums. It will be delivered next Monday.
__________________


Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims
pyr0b0y is offline   Reply With Quote
Old 05-09-2012, 01:30 PM   #2
Fallout
Mid Florida Camaro Club
 
Fallout's Avatar
 
Drives: 2012 Camaro SS Ashen Gray
Join Date: Mar 2012
Location: Orlando, FL
Posts: 273
Wow that is sick, whats the price?
Fallout is offline   Reply With Quote
Old 05-09-2012, 01:38 PM   #3
pyr0b0y
need....more....hp
 
pyr0b0y's Avatar
 
Drives: The Neighbor Hater
Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
Quote:
Originally Posted by Fallout View Post
Wow that is sick, whats the price?
PM sent...ya that much lol
__________________


Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims
pyr0b0y is offline   Reply With Quote
Old 05-09-2012, 02:07 PM   #4
Nutro


 
Nutro's Avatar
 
Drives: 2011 2SS Synergy Green
Join Date: Nov 2011
Location: Austin, Texas
Posts: 3,670
Aw man, you suck! That is bad effin ass!

I'm guessing close to $3-5K
__________________
L99 With a Maggie
Nutro is offline   Reply With Quote
Old 05-09-2012, 02:08 PM   #5
pyr0b0y
need....more....hp
 
pyr0b0y's Avatar
 
Drives: The Neighbor Hater
Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
Quote:
Originally Posted by Nutro View Post
Aw man, you suck! That is bad effin ass!

I'm guessing close to $3-5K
I wish it was only that much lol

The main reason for creating this thread was to do a write up and impression of the manifold.
__________________


Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims
pyr0b0y is offline   Reply With Quote
Old 05-09-2012, 02:11 PM   #6
Moreno1
 
Drives: G5.R
Join Date: Sep 2010
Location: SoCal
Posts: 2,377
Beautiful! Love that it only has one TB. Can't wait to see the finish compartment.
Moreno1 is offline   Reply With Quote
Old 05-09-2012, 02:21 PM   #7
pyr0b0y
need....more....hp
 
pyr0b0y's Avatar
 
Drives: The Neighbor Hater
Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
Quote:
Originally Posted by Nathan Moreno View Post
Beautiful! Love that it only has one TB. Can't wait to see the finish compartment.
Thanks, I'm also working on getting a set of carbon fiber valve covers as well.

__________________


Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims
pyr0b0y is offline   Reply With Quote
Old 05-09-2012, 02:29 PM   #8
Nutro


 
Nutro's Avatar
 
Drives: 2011 2SS Synergy Green
Join Date: Nov 2011
Location: Austin, Texas
Posts: 3,670
Quote:
Originally Posted by pyr0b0y View Post
I wish it was only that much lol

The main reason for creating this thread was to do a write up and impression of the manifold.



Haha it is beautiful though!
__________________
L99 With a Maggie
Nutro is offline   Reply With Quote
Old 05-09-2012, 02:50 PM   #9
Moreno1
 
Drives: G5.R
Join Date: Sep 2010
Location: SoCal
Posts: 2,377
Quote:
Originally Posted by pyr0b0y View Post
Thanks, I'm also working on getting a set of carbon fiber valve covers as well.


That's going to look sick! Those are same valve covers I have. They are katech. I like them best from all the CF valve covers available. I wish that intake worked in a NA application. I like it better than the one with two TBs.
Moreno1 is offline   Reply With Quote
Old 05-09-2012, 03:09 PM   #10
The Stig
knows 2 facts about ducks
 
The Stig's Avatar
 
Drives: ...and they're both wrong
Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
Quote:
Originally Posted by Nathan Moreno View Post
That's going to look sick! Those are same valve covers I have. They are katech. I like them best from all the CF valve covers available. I wish that intake worked in a NA application. I like it better than the one with two TBs.
What's wrong with having two TBs? That gets you twice as much air right?
__________________
Click to view my build thread
The Stig is offline   Reply With Quote
Old 05-09-2012, 03:16 PM   #11
pyr0b0y
need....more....hp
 
pyr0b0y's Avatar
 
Drives: The Neighbor Hater
Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
Quote:
Originally Posted by Nathan Moreno View Post
That's going to look sick! Those are same valve covers I have. They are katech. I like them best from all the CF valve covers available. I wish that intake worked in a NA application. I like it better than the one with two TBs.
Did you get the coil relocation kit too?
__________________


Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims
pyr0b0y is offline   Reply With Quote
Old 05-09-2012, 03:18 PM   #12
Moreno1
 
Drives: G5.R
Join Date: Sep 2010
Location: SoCal
Posts: 2,377
Quote:
Originally Posted by stieger View Post
What's wrong with having two TBs? That gets you twice as much air right?
I like the cleaner look and it also will be simpler to implement.

Quote:
Originally Posted by pyr0b0y View Post
Did you get the coil relocation kit too?
You could follow everything I've done on the link below. A lot of stuff that would compliment what your doing. Hit me up if you have any questions.
Moreno1 is offline   Reply With Quote
Old 05-09-2012, 03:45 PM   #13
willhe64

 
willhe64's Avatar
 
Drives: 2012 45th Vert, 2011 4x4, 9sec Vega
Join Date: Mar 2012
Location: Canada
Posts: 2,188
Oh my lord. That may be the sexiest engine part I've ever seen. Exquisite design materials and craftsmanship.
If I see that installed on a twin turbo setup I may have an involuntary orgasm.
willhe64 is offline   Reply With Quote
Old 05-09-2012, 04:33 PM   #14
pyr0b0y
need....more....hp
 
pyr0b0y's Avatar
 
Drives: The Neighbor Hater
Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
Quote:
Originally Posted by willhe64 View Post
Oh my lord. That may be the sexiest engine part I've ever seen. Exquisite design materials and craftsmanship.
If I see that installed on a twin turbo setup I may have an involuntary orgasm.
wait 3-4 weeks
__________________


Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims
pyr0b0y is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:43 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.