New low profile electric exhaust cutouts for your Camaro @ PFYC.com - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Redshift · 09-03-2009, 09:45 AM

New low profile electric exhaust cutouts now available from PFYC.com!

This oval-shaped, low profile, electronically controlled exhaust cutout means full control of your exhaust sound from the comfort and convenience of your driver seat. Designed for any car or truck that has limited ground clearance and anywhere from 2.25 inch to 3 inch exhaust pipe, this cutout will give you more sound, more performance, and not take up too much room under your car. With the Quick Time Electric Cutout you can have the best of both worlds -- quiet for the street and wide open for the drag strip, autocross, or racetrack. Go from stealth quiet to wide open power and experience gains even if you're already enjoying an aftermarket exhaust system. You control the volume and you control the power. Open your exhaust with the flip of a switch or using our optional electronic controller (sold separately). Run it closed, run it all the way open or any position in between. Even try adjusting your exhaust's back-pressure to find the optimal gas mileage if you are so inclined.

FEATURES:

Fits 2 1/4" to 3" Round Exhaust Pipes
CNC 6061 Aircraft Aluminum Body and Motor Plate
Stainless Steel Butterfly Plate and Shaft
Gears made from High Temp Steel for Long Life
High Torque DC Gear-Driven Motor (produces 1.5 ft-lb of torque)
Low Profile Design
Custom Illuminated Toggle Switch or Optional Controller
Weather Proof Wiring Harness and Connector with gold plated contacts
Made In the USA

Sample Power and Torque Gains:

2010 Camaro SS: 18 horsepower and 17 ft-lb at 5500 RPM
Dodge Charger SRT-8 w/aftermarket cat-back already installed: 11 horsepower and 12 ft-lb across most of the RPM range

Please click below to go to the ordering page.

Quick Time Low Profile Oval Electric Exhaust Cutout

--------------

To see a full listing of our brand new items, please click here.
To see a full line-up of our current sales and specials, please click here.

DON_RAFA · 09-03-2009, 10:52 AM

Do you know if someone did this to the v6 camaro? I'd be interested if I heard it first just to make sure I don't have that "Honda" sound going on.

Redshift · 09-03-2009, 10:56 AM

The cutout is quite new - have not yet heard of anyone with a V6 doing it, but I can bet that there will be many who do it soon!

DON_RAFA · 09-03-2009, 11:07 AM

True. I only see 4th gen on YouTube with cutouts and they sound pretty good. I may have to take a chance with this.

Redshift · 09-03-2009, 11:11 AM

Quote:

Originally Posted by DON_RAFA

True. I only see 4th gen on YouTube with cutouts and they sound pretty good. I may have to take a chance with this.

GM makes a sweet V6 these days - I bet it would sound very nice with the cutouts...but if you are not sure, its best to wait and catch some other people who post vids and sound clips first.

Camaro4Life2011 · 11-16-2010, 08:58 PM

anyone every get any v6 sounds on this?

GreenMonster · 03-07-2011, 06:09 PM

BUMP, thinking about this setup for my v6 whats the feedback on this type of exhaust

Camaro4Life2011 · 03-07-2011, 07:08 PM

double bump

redlich23 · 08-14-2014, 04:19 PM

Got these put on my 2011 V6 RS. Sounds amazing!!!! I have BBK LT headers, Cold air intake, New Throttle Body,and tune. Will try to post a sound file

09-03-2009, 09:45 AM	#1
Redshift Drives: Various Join Date: May 2009 Location: Raleigh NC Posts: 66	New low profile electric exhaust cutouts for your Camaro @ PFYC.com *New low profile electric exhaust cutouts now available from PFYC.com!* This oval-shaped, low profile, electronically controlled exhaust cutout means full control of your exhaust sound from the comfort and convenience of your driver seat. Designed for any car or truck that has limited ground clearance and anywhere from 2.25 inch to 3 inch exhaust pipe, this cutout will give you more sound, more performance, and not take up too much room under your car. With the Quick Time Electric Cutout you can have the best of both worlds -- quiet for the street and wide open for the drag strip, autocross, or racetrack. Go from stealth quiet to wide open power and experience gains even if you're already enjoying an aftermarket exhaust system. You control the volume and you control the power. Open your exhaust with the flip of a switch or using our optional electronic controller (sold separately). Run it closed, run it all the way open or any position in between. Even try adjusting your exhaust's back-pressure to find the optimal gas mileage if you are so inclined. FEATURES: Fits 2 1/4" to 3" Round Exhaust Pipes CNC 6061 Aircraft Aluminum Body and Motor Plate Stainless Steel Butterfly Plate and Shaft Gears made from High Temp Steel for Long Life High Torque DC Gear-Driven Motor (produces 1.5 ft-lb of torque) Low Profile Design Custom Illuminated Toggle Switch or Optional Controller Weather Proof Wiring Harness and Connector with gold plated contacts Made In the USA Sample Power and Torque Gains: 2010 Camaro SS: 18 horsepower and 17 ft-lb at 5500 RPM Dodge Charger SRT-8 w/aftermarket cat-back already installed: 11 horsepower and 12 ft-lb across most of the RPM range Please click below to go to the ordering page. Quick Time Low Profile Oval Electric Exhaust Cutout -------------- To see a full listing of our brand new items, please click here. To see a full line-up of our current sales and specials, please click here.

03-07-2011, 06:09 PM	#7
GreenMonster Its all about the U Drives: 2010 SGM Join Date: Mar 2010 Location: Miami Posts: 1,671	BUMP, thinking about this setup for my v6 whats the feedback on this type of exhaust __________________ C5.SFC5//FacebookSFC5\\SFC5.TK

03-07-2011, 07:08 PM	#8
Camaro4Life2011 Drives: Black Camaro 2LT RS with Sunroof Join Date: Jul 2010 Location: New Jersey Posts: 257 View My Garage	double bump __________________ 2011 Blk on Blk 2LT [x] Perma-grin [x]1000 Watt Dual 12'' Subs (******** Harness) [x]Blacked out Bow-ties [x]AACStyle Blue Footwell Lights. [x]AACStyle Blue LED Dome Light. [x]AACStyle Blue LED Trunk Light [x]Knight Rider 54 Blue LED [X]Valentine 1 Hard Wire [X]Valentine 1 Concealed Display [ ]20 %Tinted Windows [ ]LED Underglow [ ]Rear Footwell Lights [ ]ABL Extension [ ]Camaro RS Projection [ ]Painted Calipers [ ]Glove Box Light [ ]Door Handle Lights [ ]Cold Air Inductions CAI [ ]AACStyle Plasma DRL [ ]AACStyle License Plate LEDS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Laws	ChevyNut	Off-topic Discussions	107	11-09-2016 05:40 PM
How to Install QTP Electric Cutouts	Quick Time	Camaro DIY & HOW-TO instructions & discussions	73	05-03-2010 12:19 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
MBRP Performance Exhaust for Camaro SS $1099.88 @ BMC Performance	Kris@BMCPerformance	V8 Bolt-Ons & Tunes	1	08-08-2009 08:27 PM

09-03-2009, 10:52 AM	#2
DON_RAFA NY5THGEN Drives: 2010 Camaro 2LT/RS/A6/SIM/IO Join Date: Aug 2009 Location: FAST LANE Posts: 858	Do you know if someone did this to the v6 camaro? I'd be interested if I heard it first just to make sure I don't have that "Honda" sound going on.

09-03-2009, 10:56 AM	#3
Redshift Drives: Various Join Date: May 2009 Location: Raleigh NC Posts: 66	The cutout is quite new - have not yet heard of anyone with a V6 doing it, but I can bet that there will be many who do it soon!

09-03-2009, 11:07 AM	#4
DON_RAFA NY5THGEN Drives: 2010 Camaro 2LT/RS/A6/SIM/IO Join Date: Aug 2009 Location: FAST LANE Posts: 858	True. I only see 4th gen on YouTube with cutouts and they sound pretty good. I may have to take a chance with this.

11-16-2010, 08:58 PM	#6
Camaro4Life2011 Drives: Black Camaro 2LT RS with Sunroof Join Date: Jul 2010 Location: New Jersey Posts: 257 View My Garage	anyone every get any v6 sounds on this?

08-14-2014, 04:19 PM	#9
redlich23 Drives: 2011 Chevy Camaro RS Victory Red Join Date: Aug 2013 Location: NJ Posts: 50	Got these put on my 2011 V6 RS. Sounds amazing!!!! I have BBK LT headers, Cold air intake, New Throttle Body,and tune. Will try to post a sound file