aac halos wiring help needed - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

whitewarrior · 10-22-2012, 08:02 PM

i just bought my oracle halos they are not the dual light its just one light, can someone tell me how to wire them, not to my parking lights but to a switch, idk where to get the 12v source from

Gator6977 · 10-22-2012, 11:26 PM

RS or non RS car? If it's an RS, use the existing wires that power the factory led. Non RS, you have a couple options. You can power them off of your fog lights. That way they work with your factory switch and will always be on with your fog lights. Or, run the two power wires together and inside the cabin through the little hole just under your brake booster. Then run a wire off your lug in your fuse box and run it inside as well. Then attach then to an aftermarket switch. Either way, just need a ground in the engine bay.

10-22-2012, 08:02 PM	#1
whitewarrior Drives: camaro Join Date: Aug 2012 Location: fresno Posts: 9	aac halos wiring help needed i just bought my oracle halos they are not the dual light its just one light, can someone tell me how to wire them, not to my parking lights but to a switch, idk where to get the 12v source from

10-22-2012, 11:26 PM	#2
Gator6977 Drives: 2011 2LT RS Join Date: Apr 2010 Location: Kansas Posts: 331	RS or non RS car? If it's an RS, use the existing wires that power the factory led. Non RS, you have a couple options. You can power them off of your fog lights. That way they work with your factory switch and will always be on with your fog lights. Or, run the two power wires together and inside the cabin through the little hole just under your brake booster. Then run a wire off your lug in your fuse box and run it inside as well. Then attach then to an aftermarket switch. Either way, just need a ground in the engine bay. __________________ Last edited by Gator6977; 10-22-2012 at 11:53 PM.