09-11-2012, 07:30 PM | #1 |
Drives: 2011 Black LS3 2SS/RS Join Date: Jul 2011
Location: Indiana
Posts: 261
|
Forgestar F14 Question
Ok so when it comes to wheels I'm an idiot. I like the Forgestar F14 wheels my question is what size do I need to fit my stock tires as I'm not looking to spend money on tires and second where is my best bet as far as price on the wheels?
__________________
2011 2SS/RS, Torch Red Bow Ties, 5% Tint, Oracle Side Markers, Forgestar F14's, Pfadt lowering springs, Vararam Intake, VMax Throttle Body, Custom Grind Comp Cam 224/236 114, SLP Under Drive Pulley, Granatelli Wires, Kooks 1 7/8 LTH, Off-road pipes, 3" exhaust, Mike Norris Motorsports Tune 471 RWHP 449 RWTQ! Search for kcsr6 on YouTube for sound clips.
|
09-11-2012, 07:51 PM | #2 |
Pull up Cougar!
Drives: 2016 2SS Join Date: Jul 2011
Location: San Diego
Posts: 2,875
|
Contact Nineball he will get you all squared away. He's THE best person to order forgestars from.
|
09-12-2012, 12:36 AM | #3 |
Drives: Exige, Miata, Ghia Join Date: Jun 2011
Location: CA, Bay Area
Posts: 2,309
|
You can run stock tires on 20x9 front and 20x10.5 just fine. A little bit stretched but you can't really even tell.
|
09-12-2012, 07:58 AM | #4 |
Drives: 2013 2SS/RS Victory Red Join Date: Jul 2012
Location: Bastrop Tx
Posts: 443
|
10.5 will be a bit too much stretching IMO
|
09-12-2012, 03:31 PM | #5 |
Drives: Exige, Miata, Ghia Join Date: Jun 2011
Location: CA, Bay Area
Posts: 2,309
|
It's not. I'm running them right now and it looks great. Not stretched much either. Might depend on your tires though. I got the stock Pzeros in the rear on a 10.5" forgestar.
|
09-12-2012, 04:22 PM | #6 |
Drives: 2011 Black LS3 2SS/RS Join Date: Jul 2011
Location: Indiana
Posts: 261
|
Got any pics? Thanks for feedback as well.
__________________
2011 2SS/RS, Torch Red Bow Ties, 5% Tint, Oracle Side Markers, Forgestar F14's, Pfadt lowering springs, Vararam Intake, VMax Throttle Body, Custom Grind Comp Cam 224/236 114, SLP Under Drive Pulley, Granatelli Wires, Kooks 1 7/8 LTH, Off-road pipes, 3" exhaust, Mike Norris Motorsports Tune 471 RWHP 449 RWTQ! Search for kcsr6 on YouTube for sound clips.
|
09-13-2012, 10:22 AM | #7 |
Drives: Exige, Miata, Ghia Join Date: Jun 2011
Location: CA, Bay Area
Posts: 2,309
|
I'll take a picture later when I get home from work. They are stretch but not that much and totally doable. I settled with this fitment because it allows me to use factory sizes or move to 275front 315rears later if i wish. I get more flexibility this way.
|
09-13-2012, 10:47 PM | #8 |
Quit being a pu$$y
|
Here is a stock Pirelli on a 10.5" wheel. Looks like complete DOO DOO.
I would suggest doing it right and either getting stock sized wheels or wider wheels and new tires.
__________________
|
09-14-2012, 05:58 AM | #9 |
Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008
Location: Houston, TX
Posts: 3,849
|
Stock tires, I'd stick with 20x8.5 and 20x10.0 max width wheels. I don't even like the look of the 275 tires on the 10.0 wide wheel, as the Pirelli tires tend to run narrow anyways.
Let me know if I can help! Tony
__________________
Fquick.com/NineBall
|
09-15-2012, 01:25 PM | #10 |
|
are the prices on your site for wheels and tires or just wheels?
__________________
1 7/8" TSP headers straight piped, Custom Tick Performance cam w/ supporting mods, 1" BMR springs and other BMR suspension mods. Tuned with HPtuners by Matt@FSP
|
09-15-2012, 01:47 PM | #11 |
Drives: Widebody 2013 Mustang GT Join Date: Feb 2012
Location: 1721 E. Lambert Rd. Unit C, La Habra, Ca 90631
Posts: 2,848
|
Most I'd personally go with to make sure the tire doesn't stretch out would be 20x8.5 and 20x10. Of course you can technically fit a 20x9 and a 20x10.5 on there with the stock tires, but they'll stretch out the sidewall as pictured in one of the previous posts...
|
|
|
|
|