03-12-2013, 02:55 PM | #1 |
|
Camaro21's Build Thread (version 2.0)
Camaro21's Build version 2.0:
On September 13, 2009 my car "Rubye" (which I named after my Grandmother that raised me and just turned 96 years old on Sept. 21st) was brought home. I bought her off of the lot as a 2SS/RS, black with cyber grey rally stripes. Since then, I have spent alot of time and effort on her upgrades making her more to match my personality. Now I can truly say i am pleased with the way she has transformed. I have not only upgraded her looks, but her power as well. Some may like it and some may not, but as most of you have told me, it is my car and that's all that matters.. Today I have almost 90,000 (20,000 on new motor) miles on her and she is still going strong. I have attended MTI Funfest I & II and Camaro5Fest I, II and III, Texas Camaro Nationals II & III, Texas Wide Meetup (now known as Texas Camaro Revolution) 1, 2 & soon to be 3. Below are a list of upgrades that have been done.. Appearance Mods: Black Heritage Grill TSW Donington's 20X8.5 Front and 20X10 Rear Wheels SRP Racing Pedals Tail Light Blackouts AAC Sidemarker Lights Heater Hose Relocation Kit T3 Ports with Blue LED Strips Blue behind the Grill Lighting Blue Footwell Lighting Blue LED Dome Light Dual LED Blue Underhood Lighting Elite Engineering Tunnel Brace Elite Engineering Passenger Seat Handle Vanity License Plate (T is for Texas and the rest is N V ME ) Performance Mods: LPE Built/ADM Installed Forged 417 Magnusun Magnacharger TVS 2300 package w/OD Rear Cog Drive Dry Nitrous Kit installed by ADM Performance ADM Performance Custom Cam ADM Performance Race Cold Air Intake w/Scoop Innovators West 8-Rib Pulley System with 3.4 Blower Pulley LPE Catch Can 2" Kooks Headers with High-Flow Cats with 3" Exhaust with Magnaflow Mufflers Street Slayer Triple Carbon Clutch from Hendrix Engineering ADM Performance Custom Tune Ported Throttle Body MGW Short Throw Shifter DSS 9" Kit with 3.70 Gears, 1-Piece Aluminum Driveshaft and 1400HP Axles Pfadt Solid Rear Subframe Mounts Metco Driveshaft Safety Loop BMR Rear Trailing Arms BMR Rear Toe Rods BMR Rear Lower Adjustable Control Arms Pedders Xa Coilovers Eibach Front and Rear Sway Bars Drilled & Slotted Rotors Hawk Performance Ceramic Brake Pads ADM Performance Custom Roll Cage Weld RTS 17's Slicks/Skinnies with Hoosier Slicks & M&H Skinnies (Race Wheels/Tires) She has went through a few appearance changes: I stopped off at "City Garage" down I-35 South and took a few pics. and now it looks like this: I had some performance work done: And don't forget "SAFETY FIRST". I have a 6-Point Roll Cage as well, but no pics Some Racing Shots: My Fastest Time Slip so far: My Dyno Sheets through it's progression: |
03-12-2013, 02:58 PM | #2 |
|
future updates
|
03-12-2013, 05:11 PM | #3 |
5Th Gen (Craig)
|
Looking good Keith
I thought that my car would follow in your footsteps but I'm not so sure anymore. I bought the wife a 2013 ZL1 so my mods are on hold for now. Andy had a smoking deal on a 417 that he was going to put in his but I had just bought the ZL1 and couldn't swing it. Hopefully we can meet up soon. If work allows I'm gonna try to make a couple of the Houston events while I'm still working in the area.
__________________
2014 C7
|
03-12-2013, 09:10 PM | #4 | |
|
Quote:
It will be nice to see ya again and catch up. I am sure the wife loves her ZL1!! Does she let you drive it much? Keep in touch and let me know when you can make it out and play Sent from Camaro21's Tapatalk |
|
04-30-2013, 01:59 PM | #5 |
|
|
04-30-2013, 03:15 PM | #6 |
5Th Gen (Craig)
|
Looking good
__________________
2014 C7
|
04-30-2013, 07:22 PM | #7 |
|
|
04-30-2013, 08:27 PM | #8 |
Boosted Moderator
|
So, what happened to 1.0???? As always Keith, one of my favorite cars and people...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
04-30-2013, 08:29 PM | #9 |
Camaro CRAZY
|
I think I'm in love with your car.... haha.
Love the loos and the performance! Nicely done. |
04-30-2013, 09:47 PM | #10 | |
|
Quote:
http://www.camaro5.com/forums/showthread.php?t=107258 Thanks Mack !! |
|
|
|
Tags |
adm performance, camaro21, drag racing, supercharged, weld |
|
|