07-11-2014, 02:14 PM | #1 |
Drives: blown Join Date: Nov 2013
Location: between here and there
Posts: 147
|
2013 converter vs 2014 covnerter (6L80)
I see that the PN's for the 2010-2013 flexplate is different from the 2014 flexplate in the SS camaro. I want to know if there are any differences in the spacing on the converters between the 13 and 14 models. If any of the converter/trans vendors could chime in I would greatly appreciate it.
Thanks in advance.
__________________
VF Commodore
LSA Heads Cam Weld |
07-12-2014, 01:45 PM | #2 |
Drives: 00 Trans Am Join Date: May 2014
Location: Houston, TX
Posts: 38
|
The converters are the same. You still need an 1/8 inch of converter clearance if that's what you mean by spacing.
-Brian |
07-14-2014, 08:17 AM | #3 |
Drives: blown Join Date: Nov 2013
Location: between here and there
Posts: 147
|
Ok, reason I ask is because Im putting a converter in a 2014 SS Sedan and I just wanted to make sure the clearances were the same as the camaro's. the different PN's on the flexplate threw me off so just wanted to double check.
__________________
VF Commodore
LSA Heads Cam Weld |
|
|
|
|