01-28-2014, 01:25 PM | #1 |
Drives: 2010 Camaro V6 turbo Join Date: Feb 2012
Location: Florida
Posts: 302
|
Best rpm launching point for V6 A6???
Does anyone know the best way to start off in an autmatic for the v6? What rpm should it be at before taking off?
|
01-28-2014, 03:05 PM | #2 |
Drives: 2014 Red Hot 2SS/RS A6 Camaro Join Date: Oct 2013
Location: Metairie, LA
Posts: 5,373
|
About 1500. I have a 2LS. I've tried doing 1800 and even 2000, but the launch wasn't the best and it hurt my et. So I would say 1500-1600.
__________________
Current Camaro: 2014 2SS
Performance Mods: BBK Headers, Borla S type axle back, tune, TSP Stage 1 cam, Vararam Intake, DR's 11.77 @ 119.21 Former Camaro: 2013 2LS BONE STOCK: 13.953@100.77 With Bolt-Ons: 13.646@101.60 With 75 shot and Bolt-Ons: 12.587@111.25 Performance Mods: CAI Intake, MRT V2, SLP Underdrive Pulley, DRs, Skinnies, Rear seat delete |
01-28-2014, 06:04 PM | #3 |
Drives: 2010 Camaro V6 turbo Join Date: Feb 2012
Location: Florida
Posts: 302
|
Yea I think I tried 2000 or maybe a little more and my wheels were spinning like crazy. I have a turbo on the car does that make a difference?
|
01-28-2014, 06:39 PM | #4 |
Drives: 2014 Red Hot 2SS/RS A6 Camaro Join Date: Oct 2013
Location: Metairie, LA
Posts: 5,373
|
It does. If you wanna leave with some boost, you'd need to put some drag radials on the car. Just play around with it.
__________________
Current Camaro: 2014 2SS
Performance Mods: BBK Headers, Borla S type axle back, tune, TSP Stage 1 cam, Vararam Intake, DR's 11.77 @ 119.21 Former Camaro: 2013 2LS BONE STOCK: 13.953@100.77 With Bolt-Ons: 13.646@101.60 With 75 shot and Bolt-Ons: 12.587@111.25 Performance Mods: CAI Intake, MRT V2, SLP Underdrive Pulley, DRs, Skinnies, Rear seat delete |
01-29-2014, 06:37 AM | #5 |
Drives: 2010 Camaro V6 turbo Join Date: Feb 2012
Location: Florida
Posts: 302
|
|
01-29-2014, 11:05 AM | #6 |
Drives: 2014 Red Hot 2SS/RS A6 Camaro Join Date: Oct 2013
Location: Metairie, LA
Posts: 5,373
|
Start playing around with it. Try 1500 first.
__________________
Current Camaro: 2014 2SS
Performance Mods: BBK Headers, Borla S type axle back, tune, TSP Stage 1 cam, Vararam Intake, DR's 11.77 @ 119.21 Former Camaro: 2013 2LS BONE STOCK: 13.953@100.77 With Bolt-Ons: 13.646@101.60 With 75 shot and Bolt-Ons: 12.587@111.25 Performance Mods: CAI Intake, MRT V2, SLP Underdrive Pulley, DRs, Skinnies, Rear seat delete |
01-29-2014, 12:11 PM | #7 |
Drives: 2014 Red Hot 2SS/RS A6 Camaro Join Date: Oct 2013
Location: Metairie, LA
Posts: 5,373
|
__________________
Current Camaro: 2014 2SS
Performance Mods: BBK Headers, Borla S type axle back, tune, TSP Stage 1 cam, Vararam Intake, DR's 11.77 @ 119.21 Former Camaro: 2013 2LS BONE STOCK: 13.953@100.77 With Bolt-Ons: 13.646@101.60 With 75 shot and Bolt-Ons: 12.587@111.25 Performance Mods: CAI Intake, MRT V2, SLP Underdrive Pulley, DRs, Skinnies, Rear seat delete |
02-03-2014, 02:49 PM | #8 |
Drives: 2010 Camaro V6 turbo Join Date: Feb 2012
Location: Florida
Posts: 302
|
I just bought the invos :/
|
02-03-2014, 02:51 PM | #9 |
Drives: 2014 Red Hot 2SS/RS A6 Camaro Join Date: Oct 2013
Location: Metairie, LA
Posts: 5,373
|
Just play around with it. Start at 1500
__________________
Current Camaro: 2014 2SS
Performance Mods: BBK Headers, Borla S type axle back, tune, TSP Stage 1 cam, Vararam Intake, DR's 11.77 @ 119.21 Former Camaro: 2013 2LS BONE STOCK: 13.953@100.77 With Bolt-Ons: 13.646@101.60 With 75 shot and Bolt-Ons: 12.587@111.25 Performance Mods: CAI Intake, MRT V2, SLP Underdrive Pulley, DRs, Skinnies, Rear seat delete |
02-04-2014, 10:18 AM | #10 |
Drives: 2010 Camaro 2SS Join Date: Jun 2013
Location: Colorado
Posts: 59
|
1500 really?
At auto-x I've found 3k to be my sweet spot. My typical operation is to release (fairly hard) which causes some slip (less than a second worth), then right before the tires re-grab floor it (Not enough to cause a second slip usually at that point). Been my best launching method so far though I haven't played around with it much lately. Mind you I'm just an NA V6, though I just have Hankook V12s on the rear (275-40-20?)
__________________
PIN IT TO WIN IT!
|
02-04-2014, 10:34 AM | #11 | |
Drives: 2014 Red Hot 2SS/RS A6 Camaro Join Date: Oct 2013
Location: Metairie, LA
Posts: 5,373
|
Quote:
__________________
Current Camaro: 2014 2SS
Performance Mods: BBK Headers, Borla S type axle back, tune, TSP Stage 1 cam, Vararam Intake, DR's 11.77 @ 119.21 Former Camaro: 2013 2LS BONE STOCK: 13.953@100.77 With Bolt-Ons: 13.646@101.60 With 75 shot and Bolt-Ons: 12.587@111.25 Performance Mods: CAI Intake, MRT V2, SLP Underdrive Pulley, DRs, Skinnies, Rear seat delete |
|
02-04-2014, 02:56 PM | #12 |
Drives: 2010 Camaro 2LT RS Join Date: Nov 2013
Location: Arkansas
Posts: 17
|
I have a v6 with a manual and I'm still trying to get a feel for what rpm to launch at. Initially when I first started going to the track with my car, I was launching at 3-4K. Told a friend of mine what I was launching at and he didn't believe me, thought I was crazy. The spin isn't TO bad as long as the temps are warm and lots of cars running on the track. However we had TNT a couple of weeks ago, and I spun horribly bad all day long. Temps were in the 50s and not alot of traffic on the track that day. So I've been doing some reading on here and I see alot of drivers are launching at 1-2K. Tried this on the street last night and my car seemed to bog really really bad. IDK but I sure would like to find the sweet spot for my car before bracket racing starts this spring.
|
02-04-2014, 02:58 PM | #13 | |
Drives: 2014 Red Hot 2SS/RS A6 Camaro Join Date: Oct 2013
Location: Metairie, LA
Posts: 5,373
|
Quote:
__________________
Current Camaro: 2014 2SS
Performance Mods: BBK Headers, Borla S type axle back, tune, TSP Stage 1 cam, Vararam Intake, DR's 11.77 @ 119.21 Former Camaro: 2013 2LS BONE STOCK: 13.953@100.77 With Bolt-Ons: 13.646@101.60 With 75 shot and Bolt-Ons: 12.587@111.25 Performance Mods: CAI Intake, MRT V2, SLP Underdrive Pulley, DRs, Skinnies, Rear seat delete |
|
02-04-2014, 03:09 PM | #14 |
Drives: 2010 Camaro 2LT RS Join Date: Nov 2013
Location: Arkansas
Posts: 17
|
|
|
|
|
|