04-22-2010, 03:28 AM | #29 |
U.S. ARMY Aviation Mech
Drives: 2010 Black 2SS/RS 6 Speed Join Date: Apr 2010
Location: VA
Posts: 353
|
hey taylor I sent you a message on facebook, I love those rims and tires. how much do they run? and what kind of tire is that with the red beed around the rim
__________________
2SS/RS W/White Hood strip, 6sM. To do before I Die. Dream car-check, ...
|
09-24-2010, 07:12 PM | #30 |
El Maligno....
Drives: 2ss/rs,'10-E350, E46 328i Join Date: Jun 2009
Location: New York
Posts: 263
|
how about these?
__________________
|
09-24-2010, 07:26 PM | #31 |
Drives: 2011 Camaro 1SS Join Date: Jul 2010
Location: North Jersey
Posts: 296
|
Here you go brother.
http://www.m3post.com/forums/showthread.php?t=360188 VMR V710. VERY affordable wheels. Ask the vendors on m3post if they make 20s. EDIT: VMR only makes them in 19s. Be warned though, these are affordable for a reason (they're heavy). I couldn't find any weights for the 19s, but the 18s weigh 24 and 26 lbs (front and rear), so I would guess that the 19s weigh at least 26 and 28, which is still lighter than stock, but you are running wheels 1 inch smaller in diameter. |
09-24-2010, 11:02 PM | #32 |
El Maligno....
Drives: 2ss/rs,'10-E350, E46 328i Join Date: Jun 2009
Location: New York
Posts: 263
|
http://www.velocitymotoring.com/ when i had the csl reps on my e46 from them i Never had a issue with these wheels before not even when i had the Miro m6's on my car can't beat the price, but i never had thought on putting these wheels on my ss before....
__________________
|
09-25-2010, 12:24 PM | #33 |
Apprehensive Optimist
Drives: '10 SS/RS SIM Join Date: Sep 2008
Location: JAX
Posts: 1,383
|
There's plenty of 'patterns' that are close...but I haven't seen any with Camaro fitament...
And I will not put heavier wheels on the car...
__________________
Car is for sale --->http://www.camaro5.com/forums/showthread.php?t=158486
Current Summary: Engine:Phase One-(All work by Vengeance Racing): Custom Cam, AR Headers, ported throttle body, ported intake, custom tune, dual valve springs, hardened push rods, under drive pulley, thermostat, Vararam CAI, C5R timing chain, Melling oil pump catch can, breather, MagnaFlow Sport Axle Back Suspension: Pfadt Sport Sway Bars, Pfadt drop springs Other: MGW Shifter, Custom Paint my build journal ---->http://camaro5.com/forums/showthread.php?t=30057 |
09-25-2010, 01:59 PM | #34 |
El Maligno....
Drives: 2ss/rs,'10-E350, E46 328i Join Date: Jun 2009
Location: New York
Posts: 263
|
I agree..... but 24-26 pounds are the average on these wheels or less..... I you want something lighter these are not the wheels you want...LOL by. Looking at the pic posted on that m3 they look miro's earlier CSL's reps ( even on the original CSL m3 the wheels are made same or similar alloy 24 + pounds
)....some reps like miro or vmr are light compare to original oem wheels......which are lighter by not more than a pound.... bbs made the earlier m3 mesh wheels different not the same as the above pic ...
__________________
|
09-25-2010, 02:30 PM | #35 |
QATAR 2022
Drives: black cts-V coupe a6 Join Date: Apr 2010
Location: doha-qatar ( middle east )
Posts: 983
|
|
09-25-2010, 02:42 PM | #36 |
Check these out. They are the TSW Nurburgring wheels. They are lighter and better priced than the Forgestar wheels. They are also in stock and ready to ship.
|
|
09-25-2010, 09:36 PM | #37 |
Drives: 05 C6 Join Date: Nov 2009
Location: Las Cruces, NM
Posts: 140
|
|
09-26-2010, 02:31 AM | #38 | |
Apprehensive Optimist
Drives: '10 SS/RS SIM Join Date: Sep 2008
Location: JAX
Posts: 1,383
|
Quote:
__________________
Car is for sale --->http://www.camaro5.com/forums/showthread.php?t=158486
Current Summary: Engine:Phase One-(All work by Vengeance Racing): Custom Cam, AR Headers, ported throttle body, ported intake, custom tune, dual valve springs, hardened push rods, under drive pulley, thermostat, Vararam CAI, C5R timing chain, Melling oil pump catch can, breather, MagnaFlow Sport Axle Back Suspension: Pfadt Sport Sway Bars, Pfadt drop springs Other: MGW Shifter, Custom Paint my build journal ---->http://camaro5.com/forums/showthread.php?t=30057 |
|
09-26-2010, 02:32 AM | #39 |
Apprehensive Optimist
Drives: '10 SS/RS SIM Join Date: Sep 2008
Location: JAX
Posts: 1,383
|
Those don't have the concave look that I want...I've looked at them but they look 'flat'.... :(
__________________
Car is for sale --->http://www.camaro5.com/forums/showthread.php?t=158486
Current Summary: Engine:Phase One-(All work by Vengeance Racing): Custom Cam, AR Headers, ported throttle body, ported intake, custom tune, dual valve springs, hardened push rods, under drive pulley, thermostat, Vararam CAI, C5R timing chain, Melling oil pump catch can, breather, MagnaFlow Sport Axle Back Suspension: Pfadt Sport Sway Bars, Pfadt drop springs Other: MGW Shifter, Custom Paint my build journal ---->http://camaro5.com/forums/showthread.php?t=30057 |
09-26-2010, 02:48 AM | #40 | |
El Maligno....
Drives: 2ss/rs,'10-E350, E46 328i Join Date: Jun 2009
Location: New York
Posts: 263
|
Quote:
wow!!! the car on the pic isn't a competition package or ''zcp package''.. you could tell right away only by looking at the rotors...lol If you want to order OEM wheels. here are the part numbers; CSL 36112282650 - 81/2JX19 ET:44 $611.01 36112282999 - 91/2JX19 ET:27 $520.00 ZCP 36112282895 - 8JX19 ET:47 $469.95 36112282999 - 91/2JX19 ET:27 $520.00 or
__________________
Last edited by Den4176; 09-26-2010 at 02:59 AM. |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Looking for replicas/similar wheels - Please Help! | MiamiCane | Wheels and Tires Talk Sponsored by The Tire Rack | 3 | 03-27-2010 07:20 PM |
VIP Forged Wheels For Sale | EVS Motors Inc. | Wheels / Tires | 45 | 01-19-2010 05:13 PM |
Wheels! Your Camaro needs forged wheels. | Nine Ball | Wheels / Tires | 42 | 12-21-2009 10:51 AM |
Anyone in FL replace their wheels? | FunkyELF | USA - Southeast | 1 | 07-29-2009 05:44 PM |