Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Roto-Fab
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis


Reply
 
Thread Tools
Old 02-03-2010, 02:12 PM   #43
01pewterz28
#TeamBeckyD
 
01pewterz28's Avatar
 
Drives: 2017 HBM 2SS Convertible A8
Join Date: Aug 2008
Location: Apopka, FL
Posts: 10,496
Quote:
Originally Posted by tjd24 View Post
So in planning this upgrade I've considered ordering the OE Brembo Calipers new - here's the list of parts I think I need and would appreciate some help confirming I'm not missing anything:

92233189 Driver side front disc brake caliper, without pads, bracket, pins and clips.
92233188 Passenger side front disc brake caliper, without pads, bracket, pins and clips.
92233177 Driver side rear disc brake caliper, without pads and*bracket.
92233176 Passenger side rear disc brake caliper, without pads and bracket.
89047711 Front disc brake pad pin kit; includes 2 pins and one retainer.* 2 kits per vehicle - Charlie at Stillen indicated the pads don't come with the pins or retainer.
89047728 Rear disc brake pad pin kit; includes 2 pins and one retainer.* 2 kits per vehicle. - Charlie at Stillen indicated the pads don't come with the pins or retainer.
Plus
Stillen Slotted/drilled Rotors - front & rear - direct from Stillen
Goodridge G-Stop Braklines - ordered via Stillen
Hawk Performance Ceramic Pads - Front & rear - ordered via Stillen

Anything I'm missing? I'm having ECS here in NJ do the install so I don't want to have them tell me I'm missing any parts required. Thanks...
Looks like everything you listed is all you need they can use the factory bolts you should be good to go. When they go to install the rear rotors they will need to trim the backing plate (to replace it is a PITA).

Sean
__________________
#TeamBeckyD
**FIFTY HBM 2SS VERT**
01pewterz28 is offline   Reply With Quote
Old 02-03-2010, 04:37 PM   #44
viper1cobra
Member Club Elite #131
 
viper1cobra's Avatar
 
Drives: 2017 50th Anniversary H50 2SS
Join Date: May 2009
Location: Far West TEXAS
Posts: 1,729
Quote:
Originally Posted by tjd24 View Post
So in planning this upgrade I've considered ordering the OE Brembo Calipers new - here's the list of parts I think I need and would appreciate some help confirming I'm not missing anything:

92233189 Driver side front disc brake caliper, without pads, bracket, pins and clips.
92233188 Passenger side front disc brake caliper, without pads, bracket, pins and clips.
92233177 Driver side rear disc brake caliper, without pads and*bracket.
92233176 Passenger side rear disc brake caliper, without pads and bracket.
89047711 Front disc brake pad pin kit; includes 2 pins and one retainer.* 2 kits per vehicle - Charlie at Stillen indicated the pads don't come with the pins or retainer.
89047728 Rear disc brake pad pin kit; includes 2 pins and one retainer.* 2 kits per vehicle. - Charlie at Stillen indicated the pads don't come with the pins or retainer.
Plus
Stillen Slotted/drilled Rotors - front & rear - direct from Stillen
Goodridge G-Stop Braklines - ordered via Stillen
Hawk Performance Ceramic Pads - Front & rear - ordered via Stillen

Anything I'm missing? I'm having ECS here in NJ do the install so I don't want to have them tell me I'm missing any parts required. Thanks...
How much are you being charged for all of these parts? Is is more than Fesler, if so what are you getting in the transaction that is not offered by Fesler?

__________________
viper1cobra is offline   Reply With Quote
Old 02-03-2010, 05:20 PM   #45
camarowa

 
camarowa's Avatar
 
Drives: 2013 SVT Raptor, sold 2010 Camaro
Join Date: Jul 2009
Location: PNW....almost canada
Posts: 1,907
I ordered the rotors, calipers, lines and pads from fesler for $500 plus shipping. Had everything installed yesterday and the mechanic told me everything looked brand new. They were used but probably less than 100 miles according to him. I think tally for all the items above is going to be quite a bit higher. Good luck getting a hold of the goodridge brake lines, I waited a month, they are still at least 3 weeks out, so i gave up and cancelled the order. Did the install with the original v8 lines and I am loving the difference.
__________________
- Pfadt Suspension Package; Springs & Sways
- Brembo Brake Upgrade (Yellow); Courtesy Fesler Built
- Custom Magnaflow Exhaust
- Blacked-Out Bowties & RS Emblems, Front bowtie delete
- Full Dynamat Extreme Trunk Coverage
- Tinted side markers
- Interior DSV Customs Leather Upgrades
- Airaid CAI V2
- Forgestar F14 Gunmetal 20x9, 20x11
- Doug Thorley Shorties
camarowa is offline   Reply With Quote
Old 02-03-2010, 06:04 PM   #46
viper1cobra
Member Club Elite #131
 
viper1cobra's Avatar
 
Drives: 2017 50th Anniversary H50 2SS
Join Date: May 2009
Location: Far West TEXAS
Posts: 1,729
Quote:
Originally Posted by camarowa View Post
I ordered the rotors, calipers, lines and pads from fesler for $500 plus shipping. Had everything installed yesterday and the mechanic told me everything looked brand new. They were used but probably less than 100 miles according to him. I think tally for all the items above is going to be quite a bit higher. Good luck getting a hold of the goodridge brake lines, I waited a month, they are still at least 3 weeks out, so i gave up and cancelled the order. Did the install with the original v8 lines and I am loving the difference.
Thanks for the info. I am on a waiting list at Fesler for the Brembos. I don't know how long it will take to be able to get the parts. I am just looking at other options until i hear from Fesler.

__________________
viper1cobra is offline   Reply With Quote
Old 02-03-2010, 06:38 PM   #47
xshortd
 
xshortd's Avatar
 
Drives: 2010 Camaro 2LT Rally Yellow
Join Date: Jan 2010
Location: New Jersey
Posts: 287
does ne one know if the brembo brake set will fit regular Camaro 2LT without the RS package 19in wheels
xshortd is offline   Reply With Quote
Old 02-03-2010, 06:40 PM   #48
Tecca
.
 
Tecca's Avatar
 
Drives: ...
Join Date: Apr 2009
Location: Colorado
Posts: 1,380
Its been a long time since I have posted but this is something I cannot pass up as I believe it is a good mod to do.

I couldn't get through to Chris at Fessler either, which in turn worked out better I believe. As I found http://www.thepowdercoater.com Talk with Mike he is one of the best guys to do business with very prompt with his emails as well. Anyway he gave me a good deal and he picked up all four brakes for me already. Plus he has a massive selection of powder coating colors including RJT aka Montery Red for you Corvette guys. For those who plan on doing this mod and going to put on a different rotor, pads and line I would not go with Fessler as you will be better off buying the items seperatly and Mike will give you a great deal.

Also for those who do not want to trim the back brake plate you can get these two items as well.

92227529 Driver side rear brake backing plate.
92227530 Passenger side rear brake backing plate.

Thanks to pewterz for getting this going and showing who easy and cheap it is.
Tecca is offline   Reply With Quote
Old 02-03-2010, 06:57 PM   #49
viper1cobra
Member Club Elite #131
 
viper1cobra's Avatar
 
Drives: 2017 50th Anniversary H50 2SS
Join Date: May 2009
Location: Far West TEXAS
Posts: 1,729
Thanks for the info. I really want to try to get this upgrade done prior to C5Fest in April. I will look into this as another option.
__________________
viper1cobra is offline   Reply With Quote
Old 02-03-2010, 07:01 PM   #50
Orange5thGen

 
Orange5thGen's Avatar
 
Drives: 2011 Convert
Join Date: Oct 2009
Location: San Jose, CA
Posts: 2,052
Send a message via Yahoo to Orange5thGen
The brakes will fit, BUT you will need new wheels! The RS package wheels will work or any other set with the same fitment.

My set I bought from Hennesy Motorsport is coming out of the paint shop this week. They will not fit on my current 20" tire and wheel set without spacers and I am not doing that.


Quote:
Originally Posted by xshortd View Post
does ne one know if the brembo brake set will fit regular Camaro 2LT without the RS package 19in wheels
__________________
Come see me at www.chicago5thgen.com TEAM LLT, , 2011 Covertible 1LT RS, JDM Color Shift Halo's, Showstopper Camaro Bowtie Led Mirrors, Side Markers and Engine Cover, Pace Setter Catback Exhaust, BK Coilover Kit, 21" Full Crome GM wheels, Tinted windows, I WIN BEARS Plate. Full amber ABL dash and door update with IOM interior panels.
Orange5thGen is offline   Reply With Quote
Old 02-03-2010, 07:30 PM   #51
viper1cobra
Member Club Elite #131
 
viper1cobra's Avatar
 
Drives: 2017 50th Anniversary H50 2SS
Join Date: May 2009
Location: Far West TEXAS
Posts: 1,729
Quote:
Originally Posted by Orange5thGen View Post
The brakes will fit, BUT you will need new wheels! The RS package wheels will work or any other set with the same fitment.

My set I bought from Hennesy Motorsport is coming out of the paint shop this week. They will not fit on my current 20" tire and wheel set without spacers and I am not doing that.
Your Mirrors look very nice. I thought about getting them, but there are other mods like this that I want done first.
__________________
viper1cobra is offline   Reply With Quote
Old 02-03-2010, 07:30 PM   #52
xshortd
 
xshortd's Avatar
 
Drives: 2010 Camaro 2LT Rally Yellow
Join Date: Jan 2010
Location: New Jersey
Posts: 287
Quote:
Originally Posted by Orange5thGen View Post
The brakes will fit, BUT you will need new wheels! The RS package wheels will work or any other set with the same fitment.

My set I bought from Hennesy Motorsport is coming out of the paint shop this week. They will not fit on my current 20" tire and wheel set without spacers and I am not doing that.
Thanks for the info man!
xshortd is offline   Reply With Quote
Old 02-03-2010, 07:35 PM   #53
Orange5thGen

 
Orange5thGen's Avatar
 
Drives: 2011 Convert
Join Date: Oct 2009
Location: San Jose, CA
Posts: 2,052
Send a message via Yahoo to Orange5thGen
Thanks.... My mirrors rock now, Thanks To Showstopper.......
__________________
Come see me at www.chicago5thgen.com TEAM LLT, , 2011 Covertible 1LT RS, JDM Color Shift Halo's, Showstopper Camaro Bowtie Led Mirrors, Side Markers and Engine Cover, Pace Setter Catback Exhaust, BK Coilover Kit, 21" Full Crome GM wheels, Tinted windows, I WIN BEARS Plate. Full amber ABL dash and door update with IOM interior panels.
Orange5thGen is offline   Reply With Quote
Old 02-03-2010, 09:39 PM   #54
tjd24
Thank you Oshawa/St.Cats!
 
tjd24's Avatar
 
Drives: was 2010 2LT RS 2G1FC1EV4A9103434
Join Date: May 2009
Location: NW NJ
Posts: 3,481
Quote:
Originally Posted by viper1cobra View Post
How much are you being charged for all of these parts? Is is more than Fesler, if so what are you getting in the transaction that is not offered by Fesler?

I'll pm you - here'll I'll say the new OE Brembo Calipers with pins and retainer were about $120 more - so its the trade-off of new versus slightly used. I decided I'd rather go new. You can ask Charlie at Stillen for his quote on the rotors, pads and brakelines.
__________________
#3434 Born 4-15-2009, Delivered 5-22-2009 BBOMG 2/3/4 - Traded-in 8/31/2019:
tjd24 is offline   Reply With Quote
Old 02-03-2010, 09:50 PM   #55
tjd24
Thank you Oshawa/St.Cats!
 
tjd24's Avatar
 
Drives: was 2010 2LT RS 2G1FC1EV4A9103434
Join Date: May 2009
Location: NW NJ
Posts: 3,481
Quote:
Originally Posted by Teccboxx View Post
Also for those who do not want to trim the back brake plate you can get these two items as well.

92227529 Driver side rear brake backing plate.
92227530 Passenger side rear brake backing plate.
Thanks Teccboxx - I didn't think to ask about the plate - they're a bit pricey so I think I'll go with the plate haircut...
__________________
#3434 Born 4-15-2009, Delivered 5-22-2009 BBOMG 2/3/4 - Traded-in 8/31/2019:
tjd24 is offline   Reply With Quote
Old 02-03-2010, 10:15 PM   #56
01pewterz28
#TeamBeckyD
 
01pewterz28's Avatar
 
Drives: 2017 HBM 2SS Convertible A8
Join Date: Aug 2008
Location: Apopka, FL
Posts: 10,496
Quote:
Originally Posted by tjd24 View Post
Thanks Teccboxx - I didn't think to ask about the plate - they're a bit pricey so I think I'll go with the plate haircut...
I can tell you if you plan to replace the plate you can expect to add another 1-2 hours removing the rear suspension, ect.. to get it off and then replacing stuff IMHO it was not worth it I fabed up a nice piece of .095 bent aluminum I can tack weld in place of the 5/8" I had to remove if I wanted to but I do not see a need for it.

For those who are purchasing the Brembo package from Fesler all of the sets Chris had in stock had under 50 miles on them pretty much from the plant to the truck to the rail car and then driven from the dealership to the Fesler shop and then they removed them.

Sean
__________________
#TeamBeckyD
**FIFTY HBM 2SS VERT**
01pewterz28 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Drum brakes hard to beat KILLER74Z28 General Automotive + Other Cars Discussion 17 02-16-2012 12:40 PM
Brembo Brakes ChevyBoiSS Wheels and Tires Talk Sponsored by The Tire Rack 15 02-03-2009 07:23 PM
What's written on the brembo brakes FUTURE TOP DOG OWNER 5th Gen Camaro SS LS LT General Discussions 19 09-19-2008 08:11 PM
Brembo brakes question topgun1 Wheels and Tires Talk Sponsored by The Tire Rack 20 09-04-2008 10:34 AM
EWB Electronic Wedge Brakes KILLER74Z28 General Automotive + Other Cars Discussion 10 11-13-2006 12:12 AM


All times are GMT -5. The time now is 08:10 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.