QTP Electric Exhaust Cutouts Pictures and Videos!!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Quick Time · 08-19-2009, 04:02 PM

We had a 2010 Camaro SS come in to our warehouse to for some product development and before it left we put some of our Oval Low Profile Electric Exhaust Cutouts on. The Camaro is so quiet with the factory system in place that you question if the car is running or not. With our cutouts on there is no question. Flip the switch and all hell is unleashed.

Our new oval low profile electronically controlled exhaust cutouts. A new low profile electric cutout designed for any car or truck that has limited ground clearance. With the Quick Time Electric Cutout you can have the best of both worlds! Quiet for the street and wide open for the strip. Go from stealth quiet to wide open power and experience the gains even if your already enjoying an aftermarket exhaust system. You control the volume, you control the power. Open your exhaust with the flip of a switch. Run it closed, run it all the way open or any position in between.
• -Fits 2 1/4" to 3" Round Exhaust Pipe.
• -Low Profile Design
• -CNC 6061 Aircraft Aluminum Body
• -Stainless Steel Butterfly Plate and Shaft
• -6061 Aircraft Aluminum Motor Plate
• -High Torque DC Gear Driven Motor (1 1/2 Ft lbs TQ)
• -Custom Illuminated Toggle Switch or Optional Controller
• -Weather Proof Connector w/gold plated contacts
• -Made In the USA

Gained 18hp and 17tq at 5500rpm.

Now for the videos!!!

We also have another video on our website that has a little music and shows how it was installed but its not on youtube. They bounced the video because of the music for some reason.
Its here on street fire.
http://videos.streetfire.net/video/2...ric_700654.htm

Also have all the oval cutout videos on our oval page.
http://www.quicktimeperformance.com/OVAL/index.php

This is a standard part number that also fits GTOs, Charger, Challenger and any car that has limited clearance.

Part number:
QTEC66-Dual Oval Electric Cutouts
11338-Oval Turn Downs
10200-Optional Electric Cutout Controller

Any muffler shop can weld them on the car. The wiring is very easy.

You should see these on many high end cars like The Nickey Camaros and other super cars.

These are in stock and ship out with in 24-48hrs. No wait time.

Any questions feel free to give us a call at 201-444-0998 or email us at sales@quicktimeperformance.com

blackZbandit · 08-19-2009, 05:18 PM

niiiiiice

Deeboe · 08-19-2009, 05:55 PM

sounds mean nice price too.

GOINGSOLO2 · 08-19-2009, 05:58 PM

I actually heard and saw this car in person after an automotive meet at OBI in Long Island, NY. One of our fellow car club members has both a Solstice and a Camaro, and one of his Camaro buddies came to meet us at a diner for breakfast. This car sounds mean. The cutouts looked great and sounded fantastic. The owner was telling us about dropping his car off at your shop and having this done, and he was very pleased with the results. The controller looked very simple to use, and the difference between the OEM sound and that with the cutouts open is dramatic. The flexibility between quiet and loud is a very nice feature to have, especially if you use the Camaro as a daily driver. Very nice product and I was impressed with the sound...and a little jealous.

Quick Time · 08-21-2009, 11:32 AM

Quote:

Originally Posted by GOINGSOLO2

I actually heard and saw this car in person after an automotive meet at OBI in Long Island, NY. One of our fellow car club members has both a Solstice and a Camaro, and one of his Camaro buddies came to meet us at a diner for breakfast. This car sounds mean. The cutouts looked great and sounded fantastic. The owner was telling us about dropping his car off at your shop and having this done, and he was very pleased with the results. The controller looked very simple to use, and the difference between the OEM sound and that with the cutouts open is dramatic. The flexibility between quiet and loud is a very nice feature to have, especially if you use the Camaro as a daily driver. Very nice product and I was impressed with the sound...and a little jealous.

The difference is night and day. I will have Joe post his impressions of the cutouts.

Santos · 08-21-2009, 11:37 AM

why is yours so much cheaper than noweeds, i have had qtp before on another car it was a great system

destroyer4 · 08-21-2009, 12:22 PM

Hey Guys, This is my car that QTP worked on. It is amazing. The looks I get with the car alone are amazing. Then as soon as I hit the switch, it takes it to another level. There are a few people here on the site that have seen and heard my car and they said the same. I at first was not going to do this to my stock exhaust, I was going to wait until after their exhaust was complete and then do it all, but as soon as I heard their Shop Vette, there was no way in hell I was not going to have them put these on. I do not have headers or aftermarket exhaust. This is the stock exhaust with just the cutouts.
Only one word can describe:

WOW

zebra · 08-21-2009, 12:25 PM

where is the switch? any pics?

EDIT: never mind. dang slow interwebz! :bangdesk:

*CamaroSpike23* · 08-21-2009, 03:35 PM

Quote:

Originally Posted by Santos

why is yours so much cheaper than noweeds, i have had qtp before on another car it was a great system

because they are different setups.

QTP system are exhaust cutouts
the Noweeds system is an exhaust diverter

the Noweeds system fully blocks off the back end of the exhaust and only allows the flow to go out at the valve opening.

the QTP system doesnt block off the rest of the exhaust, just opens up and allows it to exit earlier

philthy · 08-21-2009, 03:46 PM

I have QTP's on my 69 Chevelle...they work great and are alot better than laying on your back in a asphalt parking lot trying to undo hot wing nuts on a manual cutout! Not to mention they are real handy when a cop rolls up on you.

navyflyer72 · 08-21-2009, 07:46 PM

This is a must! Awesome sound!

Killer Bee · 08-21-2009, 10:31 PM

Okay, would somebody who is savvy on exhausts please tell me why I don't want to buy these? This seems like an awesome solution with a stock exhaust versus upgrading the whole exhaust especially if the HP claims are true. I'm serious, why does this sound too good to be true?

Also, what would it realistically cost to have a good muffler shop install this?

cmyzfly · 08-22-2009, 12:13 AM

I have them on my car and they are great.

BOBSS · 08-22-2009, 12:41 AM

don't think, just do
do yourself a favor, get headers too
it's your duty as an American
There are fabricators that need your dollars
Join in the celebration of the last days of gasoline

08-19-2009, 04:02 PM	#1
Quick Time Keep It Loud! Drives: 2016 Camaro SS Join Date: Jul 2009 Location: Hawthorne, NJ Posts: 72	QTP Electric Exhaust Cutouts Pictures and Videos!!! We had a 2010 Camaro SS come in to our warehouse to for some product development and before it left we put some of our Oval Low Profile Electric Exhaust Cutouts on. The Camaro is so quiet with the factory system in place that you question if the car is running or not. With our cutouts on there is no question. Flip the switch and all hell is unleashed. Our new oval low profile electronically controlled exhaust cutouts. A new low profile electric cutout designed for any car or truck that has limited ground clearance. With the Quick Time Electric Cutout you can have the best of both worlds! Quiet for the street and wide open for the strip. Go from stealth quiet to wide open power and experience the gains even if your already enjoying an aftermarket exhaust system. You control the volume, you control the power. Open your exhaust with the flip of a switch. Run it closed, run it all the way open or any position in between. • -Fits 2 1/4" to 3" Round Exhaust Pipe. • -Low Profile Design • -CNC 6061 Aircraft Aluminum Body • -Stainless Steel Butterfly Plate and Shaft • -6061 Aircraft Aluminum Motor Plate • -High Torque DC Gear Driven Motor (1 1/2 Ft lbs TQ) • -Custom Illuminated Toggle Switch or Optional Controller • -Weather Proof Connector w/gold plated contacts • -Made In the USA Gained 18hp and 17tq at 5500rpm. Now for the videos!!! We also have another video on our website that has a little music and shows how it was installed but its not on youtube. They bounced the video because of the music for some reason. Its here on street fire. http://videos.streetfire.net/video/2...ric_700654.htm Also have all the oval cutout videos on our oval page. http://www.quicktimeperformance.com/OVAL/index.php This is a standard part number that also fits GTOs, Charger, Challenger and any car that has limited clearance. Part number: QTEC66-Dual Oval Electric Cutouts 11338-Oval Turn Downs 10200-Optional Electric Cutout Controller Any muffler shop can weld them on the car. The wiring is very easy. You should see these on many high end cars like The Nickey Camaros and other super cars. These are in stock and ship out with in 24-48hrs. No wait time. Any questions feel free to give us a call at 201-444-0998 or email us at sales@quicktimeperformance.com __________________ Quick Time Performance Last edited by Quick Time; 02-22-2011 at 09:30 AM.

08-19-2009, 05:18 PM	#2
blackZbandit Drives: BLACK ON BLACK 2012 CAMARO SS Join Date: Feb 2008 Location: LOS ANGELES, CA Posts: 743 View My Garage	niiiiiice __________________ BLACK CAR + FLAT BLACK STRIPES + BLACK WHEELS = BLK PW3R!! **Thanks to Silver Streak for the pic I used to make this sig**

08-19-2009, 05:55 PM	#3
Deeboe Bowtie, FOR LIFE!!!! Drives: Camaro 2SS/RS SW/IOM Interrior Join Date: Jul 2009 Location: Where ever Uncle Sam Places me... Posts: 512	sounds mean nice price too. __________________ 2SS/RS Summit White M6 Current: 2011 SW 2SS/RS M6 Fast!!! 70 Chevelle SS (sold) Still kicking myself! 2010 CGM SS/RS A6 (RIP) one pissed SS right there!!!!

08-21-2009, 11:37 AM	#6
Santos Santos Drives: 1SS Blk 6M ECS 1500 Join Date: Jul 2007 Location: Virginia Beach, Virginia Posts: 606 View My Garage	why is yours so much cheaper than noweeds, i have had qtp before on another car it was a great system __________________

08-21-2009, 12:22 PM	#7
destroyer4 Drives: 2010 Camaro SS, 2006 PT Conv. Join Date: Oct 2008 Location: Baldwin NY Posts: 351	Hey Guys, This is my car that QTP worked on. It is amazing. The looks I get with the car alone are amazing. Then as soon as I hit the switch, it takes it to another level. There are a few people here on the site that have seen and heard my car and they said the same. I at first was not going to do this to my stock exhaust, I was going to wait until after their exhaust was complete and then do it all, but as soon as I heard their Shop Vette, there was no way in hell I was not going to have them put these on. I do not have headers or aftermarket exhaust. This is the stock exhaust with just the cutouts. Only one word can describe: WOW __________________ Cyber Gray/Black/Black Stripes,2SS/RS,Auto 1100, Preliminary order accepted 10/16/09 3800, Order produced 6/22 Vin:2G1FK1EJ9A9120942 6000, Delivered to the customer 7/7/09

08-19-2009, 05:58 PM	#4
GOINGSOLO2 Drives: All Models Join Date: Aug 2009 Location: NY Posts: 1,475	I actually heard and saw this car in person after an automotive meet at OBI in Long Island, NY. One of our fellow car club members has both a Solstice and a Camaro, and one of his Camaro buddies came to meet us at a diner for breakfast. This car sounds mean. The cutouts looked great and sounded fantastic. The owner was telling us about dropping his car off at your shop and having this done, and he was very pleased with the results. The controller looked very simple to use, and the difference between the OEM sound and that with the cutouts open is dramatic. The flexibility between quiet and loud is a very nice feature to have, especially if you use the Camaro as a daily driver. Very nice product and I was impressed with the sound...and a little jealous.

08-21-2009, 12:25 PM	#8
zebra just can't seem to leave Drives: your mom wild!! Join Date: Oct 2008 Location: cold & windy Posts: 10,625 View My Garage	where is the switch? any pics? EDIT: never mind. dang slow interwebz! :bangdesk: __________________ Eve ('00 FRC): hot-air intake Rowan ('09 H3): 5spd mom-mobile Penny ('99 Sierra): 5.3 / HD 5spd... gone but not forgotten Samson ('18 HD): compounded 408

08-21-2009, 03:46 PM	#10
philthy Drives: 1971 Monte Carlo/2010 Camaro 2LT Join Date: Sep 2007 Location: Macomb Township, MI Posts: 821 View My Garage	I have QTP's on my 69 Chevelle...they work great and are alot better than laying on your back in a asphalt parking lot trying to undo hot wing nuts on a manual cutout! Not to mention they are real handy when a cop rolls up on you. __________________ 2024 Camaro SS convertible 2010 Camaro 2LT 2019 Cadillac CTS 1971 Monte Carlo

08-21-2009, 07:46 PM	#11
navyflyer72 Drives: 2010 2SS/RS 6spd, BLK/CYB GRY Join Date: May 2009 Location: MD Posts: 456 View My Garage	This is a must! Awesome sound! __________________ The Zac Hartwell & Ryan Dunn Tribute Camaro Project and Tour Benefiting the Wounded Warrior Project & Garth Brooks Teammates for Kids

08-21-2009, 10:31 PM	#12
Killer Bee Drives: 2SS/RS, IOM/IOM Interior, SR Join Date: Jul 2009 Location: Tucson, Arizona Posts: 94	Okay, would somebody who is savvy on exhausts please tell me why I don't want to buy these? This seems like an awesome solution with a stock exhaust versus upgrading the whole exhaust especially if the HP claims are true. I'm serious, why does this sound too good to be true? Also, what would it realistically cost to have a good muffler shop install this? __________________ Killer Bee 2SS/RS, IOM/IOM, LS3, Sunroof, Carbon Fiber Hood & Rear Spoiler, Ram Air, Electric Cutouts & Megan Fox in the Passenger Seat 9/10/09: Delivered!

08-22-2009, 12:13 AM	#13
cmyzfly Drives: 2010 Camaro 1SS Join Date: Jun 2009 Location: Bartlett, TN Posts: 86	I have them on my car and they are great.

08-22-2009, 12:41 AM	#14
BOBSS Outlaw Drives: 2010SS Join Date: Jan 2009 Location: Mooresville NC Posts: 299	don't think, just do do yourself a favor, get headers too it's your duty as an American There are fabricators that need your dollars Join in the celebration of the last days of gasoline