11-17-2012, 01:28 PM | #1 |
Drives: Camaro 2SS RS Victory Red Join Date: Mar 2012
Location: Hurley NY
Posts: 52
|
Installing a catch can on a V6
I have a catch can to install on my 2012 Camaro V6. My question is this how do I remove the hose that goes between the PCV valve and the valve cover without destroying the fittings? Any help would be appreciated.
|
11-17-2012, 03:11 PM | #2 |
Don't Sleep on My V6
|
If your talking about the elbow that is on the passenger side rear...you can just cut that hard plastic hose with some cutters. Just leave about 1-2 inch to be able to hook the hose up to.
__________________
|
11-22-2012, 07:42 PM | #3 |
Drives: 2011 2LT RS Join Date: Apr 2010
Location: Kansas
Posts: 331
|
I took a razor blade to mine and cut the plastic free from the fitting.
__________________
|
11-23-2012, 02:56 PM | #4 |
NEcamaro5
|
There is a small push clip at the base of the hose. It's part of the hose
|
11-23-2012, 07:24 PM | #5 |
|
I was told by JDP motorsports to just cut the hose in the middle,that way you have plenty of hose to work with.That is what i did,and it was a good thing i did cause i had to take mine off,im selling my car.
|
|
|
|
|