02-17-2014, 03:05 PM | #1 |
Drives: A Gift From My Wife Join Date: Apr 2009
Location: Powder Springs, GA
Posts: 1,557
|
Over Spray Removal
I have some over spray on some of the plastic pieces in the trunk.
What dp you guys suggest I use to remove it? -Funk
__________________
2012 Convert 2SS/RS SW/IO LS3 - Build #1081
07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession. |
02-17-2014, 07:10 PM | #2 |
|
You can try clay. Might not work that well on the textured plastic but it might.
Also a very steady hand and a razor blade has been known to work on plastic. Sent from my HTC One using Tapatalk 2
__________________
[B]
|
02-17-2014, 08:11 PM | #3 |
Drives: A Gift From My Wife Join Date: Apr 2009
Location: Powder Springs, GA
Posts: 1,557
|
I will try the clay.
Razor blade on textured plastic is not a good idea. -Funk
__________________
2012 Convert 2SS/RS SW/IO LS3 - Build #1081
07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession. |
02-17-2014, 08:18 PM | #4 | |
|
Quote:
Sent from my HTC One using Tapatalk 2
__________________
[B]
|
|
02-17-2014, 08:50 PM | #5 |
"Detailing Devil Dog"
Drives: 2001 Corvette Coupe Join Date: Jan 2010
Location: Louisville, KY
Posts: 2,730
|
I agree. I have never had an issue removing overspray with nothing more than clay.
__________________
"Marines - Making the other guy die for his country for over 200 years."
|
02-17-2014, 09:54 PM | #6 |
Drives: A Gift From My Wife Join Date: Apr 2009
Location: Powder Springs, GA
Posts: 1,557
|
[QUOTE=CamaroDreams07;7429522]It is when you use the corner to flick the paint off. Not to scrape.[/QUO]
This is more than just flicking a bit of paint off. Thanks JM, I will let you know how it goes. -Funk
__________________
2012 Convert 2SS/RS SW/IO LS3 - Build #1081
07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession. |
|
|
|
|