06-05-2015, 01:36 AM | #1 |
Optimus Prime
Drives: Camaro ZLS [COTW 09/22/14] Join Date: Dec 2012
Location: CYBERTRON
Posts: 2,315
|
Anybody know how to install tow hook on the ZL1 bumper?
I got it from ZL1 addons, but I just wanted to see if anyone can give me some tips on installing it. I want to put it on like asap lol
I'm trying to figure out where the little plate withe the little screw goes
__________________
|
06-05-2015, 11:36 PM | #2 |
|
The small plate with the bolt and nut goes on the large plate where the partial drill hole is. It will hold the large plate in place. It took me a little while to figure out had to study the directions for a while and test fit on car. Did mine last summer don't remember a lot of details but, you'll see it as you study directions more.
Hope this helps. |
06-05-2015, 11:40 PM | #3 | |
Optimus Prime
Drives: Camaro ZLS [COTW 09/22/14] Join Date: Dec 2012
Location: CYBERTRON
Posts: 2,315
|
Quote:
__________________
|
|
06-05-2015, 11:47 PM | #4 |
|
I don't remember exactly but, the only hole from the outside thru the number will be for the large nut. I do remember pulling the front tire off and drilling in there. Sorry I don't have my directions anymore. I know the guy who sells these said we can call him anytime for questions.
|
06-05-2015, 11:49 PM | #5 |
Optimus Prime
Drives: Camaro ZLS [COTW 09/22/14] Join Date: Dec 2012
Location: CYBERTRON
Posts: 2,315
|
Ok you think you can send me a pm so i can call him or if you can? I want to install it this Sunday. Btw how do you pop off the little plastic round piece when you put it on to cover the whole without scratches?
__________________
|
06-05-2015, 11:52 PM | #6 |
|
Let me check and see if I have any info. As far as removing the plug, that's the hard part, I use a small piece of plastic and then my fingers. I'll brb.
|
06-05-2015, 11:56 PM | #7 |
Optimus Prime
Drives: Camaro ZLS [COTW 09/22/14] Join Date: Dec 2012
Location: CYBERTRON
Posts: 2,315
|
Ok
__________________
|
06-06-2015, 12:07 AM | #8 |
|
I found this picture..
|
06-06-2015, 12:08 AM | #9 |
|
Sent PM
|
06-06-2015, 12:10 AM | #10 |
Optimus Prime
Drives: Camaro ZLS [COTW 09/22/14] Join Date: Dec 2012
Location: CYBERTRON
Posts: 2,315
|
Ok awesome, I have that picture too.. so I have to drill a whole in the front of that safety brace and a small one in the back of it to put that small screw and plate right?
__________________
|
06-06-2015, 12:14 AM | #11 |
|
Yea, that small bolt will put pressure on the large plate and hold it against the front wall of the bumper.
|
07-13-2016, 09:16 PM | #12 |
I've purchased these tow hooks recently, have studied the "directions", and initially I am not impressed.
|
|
07-21-2016, 02:29 PM | #13 |
Drives: 2014 CRT ZL1 Join Date: Jun 2013
Location: Central NJ
Posts: 712
|
Too Import Tuner 2000.
__________________
ZL1 Camaro - Worlds Largest Sports Car
Road King - Not Garage Queen |
08-06-2016, 03:25 PM | #14 |
I installed the front tow hook today. It took a leap of faith to drill thru the front fascia and subframe.
Added two pictures to my album. One with the tow hook installed, one with it removed |
|
|
|
|
|