Tires and rims for strip - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jdarc1 · 10-27-2014, 02:09 PM

2011 Camaro SS lowered.

Im looking for tires and rims for when I go to the track only.
I currently run P Zero 20 inch for the street but am looking for a wheel and tire setup that I can drive to the track. I want to change the tires and then drive to the track and remove when I get home later.
Does anyone know which rim will fit if I go to an 18 and which tire is best.
I was looking at MT's but not sure. Im more concerned about the rim fitting over the Brembo in the back.

Thanks

Rcfiddy1 · 10-27-2014, 02:45 PM

Weld makes them, or 17in vette rims with offset, all depends on money.
These are vette rims with MT Drag Radials. You will run into clearance issues being lowered and might need to swap out LCA to BMRs. I am lowered right now and still able to use the vette rims but had to tie back ebrake cable.

Welds

Scott 78 · 10-30-2014, 07:24 PM

What can you tell me about those Weld wheels? Those are sexy.

10-27-2014, 02:09 PM	#1
jdarc1 Drives: 2011 Camaro SS Join Date: Jul 2013 Location: Florham Park NJ Posts: 44 View My Garage	Tires and rims for strip 2011 Camaro SS lowered. Im looking for tires and rims for when I go to the track only. I currently run P Zero 20 inch for the street but am looking for a wheel and tire setup that I can drive to the track. I want to change the tires and then drive to the track and remove when I get home later. Does anyone know which rim will fit if I go to an 18 and which tire is best. I was looking at MT's but not sure. Im more concerned about the rim fitting over the Brembo in the back. Thanks __________________

10-27-2014, 02:45 PM	#2
Rcfiddy1 Sold car... Drives: 2010 Rally Yellow 2SS/RS #37115 Join Date: Oct 2009 Location: Manalapan, New Jersey Posts: 2,019 View My Garage	Weld makes them, or 17in vette rims with offset, all depends on money. These are vette rims with MT Drag Radials. You will run into clearance issues being lowered and might need to swap out LCA to BMRs. I am lowered right now and still able to use the vette rims but had to tie back ebrake cable. Welds __________________ Build Thread ECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust. Last edited by Rcfiddy1; 10-27-2014 at 03:00 PM.

10-30-2014, 07:24 PM	#3
Scott 78 Drives: 2014 SIM SS 6M Join Date: Feb 2012 Location: Beloit WI Posts: 301 View My Garage	What can you tell me about those Weld wheels? Those are sexy.