02-21-2009, 10:24 PM | #1 |
Drives: 2010 2SS RS Camaro Join Date: Dec 2008
Location: St. Louis, MO
Posts: 233
|
Molded Splash Guards
Has any one see a picture of the Camaro with molded splash guards? I noticed is is an option... I am not sure the cost. All of the cars I have purchased over the years off of the lot have had splash guards. They have always looked good so I assume they would look good on the Camaro as well. Has anyone requested this on their orders? I don't remember being asked if I wanted them.
|
02-21-2009, 10:27 PM | #2 | |
Drives: 2010 Camaro Join Date: Jun 2008
Location: Houston
Posts: 872
|
Quote:
|
|
02-21-2009, 10:29 PM | #3 |
Drives: ... Join Date: Oct 2008
Location: ...
Posts: 1,721
|
I haven't seen any yet myself. I'm not sure what they would look like.
|
02-21-2009, 10:32 PM | #4 |
2010 SIM Beige RS 6M
Drives: SIM RS 6M 66 Corvair Silverado LTZ Join Date: Oct 2008
Location: Kamloops,British Columbia
Posts: 4,677
|
They are listed as an over the counter item.
__________________
CAMARO.. 2010 The Heart Beat is back in CHEVROLET
Now let's put it back in America |
02-21-2009, 11:35 PM | #5 |
just can't seem to leave
|
the only place i've seen them is in the accessory display case at the shows
__________________
Eve ('00 FRC): hot-air intake
Rowan ('09 H3): 5spd mom-mobile Penny ('99 Sierra): 5.3 / HD 5spd... gone but not forgotten Samson ('18 HD): compounded 408 |
02-22-2009, 03:03 AM | #6 |
~ Love or Lust ~
Drives: R6P 1SS/RS BLK/L99 Join Date: Oct 2008
Location: With My CynAgain
Posts: 25,198
|
I don't think any of us have seen 'em on a Camaro yet, but am confident they will look very nice. They are one of the extras that I do believe I'll add to my SS when they become available.
__________________
~ Then conquer we must, when our cause it is just, And this be our motto, "In God is our trust." And the Star Spangled Banner in triumph shall wave O'er the land of the free and the home of the brave ~ Francis Scott Key ~
|
02-22-2009, 07:46 PM | #7 |
Drives: 2010 2SS RS Camaro Join Date: Dec 2008
Location: St. Louis, MO
Posts: 233
|
I assume the molded splash guards will look like this:
http://images.google.com/imgres?imgu...%3D1%26hl%3Den |
02-22-2009, 07:51 PM | #8 | |||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
Quote:
All their stuff is FREEEEEEEEEEEEEEEE!!!!!!!!!!!!!!
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
|||
02-22-2009, 10:25 PM | #9 |
Mechanical Engineer
Drives: 2012 IBM Camaro 2SS/RS A6 Join Date: Oct 2008
Location: Maryland
Posts: 226
|
After my experience with my Prelude, I don't think I could go the route of splash guards again. The ones on the Prelude are molded rubber that follow the contours of the fenders. What nobody tells you is that over time, since these are in direct contact with the paint of the car, any flash left over from the molding process can leave an imprint in the paint, and, in my case, remove it down to the primer as the flash slowly etches its way down. At this point I can never take them off without repainting four fenders.
Just be advised that this could be a potential future problem, and make sure to scope out how they are going to be attached to the Camaro. Depending on how GM has engineered it, it may not be an issue at all, but just giving my $0.02 .
__________________
Current Vehicle: 2012 Chevrolet Camaro SS
Past Vehicle: 2001 Honda Prelude SS LEFT HAND DRIVE |
06-10-2009, 04:45 PM | #10 |
I ordered a set, but I have not seen them on a Camaro yet. Anyone else?
Update: Just got notified they are on back order Last edited by rickerda; 06-10-2009 at 07:29 PM. |
|
06-10-2009, 04:50 PM | #11 |
Drives: 2017 ZL1, A10, White, sunroof, nav Join Date: Apr 2009
Location: Garner, NC
Posts: 720
|
There was (or is) a pic on here somewhere of, I think, an IOM that the guy had them put on and said the GM emblem had to be moved or something.....they looked preety good in the pic....I think he called them "quarter panel flares" or something like that......
|
06-10-2009, 04:55 PM | #12 | |
Then you're gonna love me
Drives: 2010 Black Camaro Tumbler RS Join Date: Dec 2007
Location: NW Gotham, IL
Posts: 1,599
|
Quote:
I'm getting them on my Black Camaro but can't post pics until I get my car. :( Found edog's and another Camaro. http://www.camaro5.com/forums/showth...quarter+flares http://www.camaro5.com/forums/showth...quarter+flares
__________________
Own- "Does it come in Black?" Exterior/ Grey Interior 2LT/RS Automatic
_____________________________________ The Batman would only drive a 2010 Camaro and buy from Camaro Scotty. 'Nuff said. Anyone that knows of a place that is making the Concept Shifter for the new Camaro. (Auto specifically) Please let me know. Order# NDTMVP Ordered 10/23/08. 2000 on 5/21/09... It begins..... 4B00 on 6/26/09... In transit to the Cave 5000 on 7/6/09 it waits for my arrival! 1000000 on 7/10/09 The Tumbler is in the Cave! Last edited by GothamCamaro; 06-10-2009 at 05:07 PM. |
|
06-10-2009, 05:12 PM | #13 |
OH CANADA!
Drives: 2011 RAM 1500 LARAMIE Join Date: Mar 2009
Location: Edmonton, AB, CAN
Posts: 3,930
|
This thread has pics of one with it installed on the front
http://www.camaro5.com/forums/showth...=splash+guards also founds this pic on google..
__________________
Had to trade in the Camaro for a truck :(, but hopefully I can join the Camaro family again one day |
06-10-2009, 05:17 PM | #14 |
Thank you Oshawa/St.Cats!
Drives: was 2010 2LT RS 2G1FC1EV4A9103434 Join Date: May 2009
Location: NW NJ
Posts: 3,481
|
I ordered via GM Parts Direct http://www.gmpartsdirect.com - the list price is $199, their price $144.87 though shipping was steep at ~ #30 - still cheaper than OTC plus local tax. They're on national backorder per an email I got this morning - I assume due to GM restructuring.
__________________
#3434 Born 4-15-2009, Delivered 5-22-2009 BBOMG 2/3/4 - Traded-in 8/31/2019:
|
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Contoured Splash Guards? | blazzin1 | Cosmetics and Lighting Modification Discussions | 13 | 01-14-2009 05:37 AM |