You are browsing camaro5 
 |
|
09-21-2014, 09:55 PM
|
#1 |
 
Drives: 2ssrs Join Date: Jul 2014
Location: Orange County
Posts: 145
|
Stainless Power LT w/ HF Cats???
Has anyone used these or are using these and how good I'd the quality and power? I know they are made oversees I understanf that but want to know from actual experiences.
__________________
2010 Camaro 2SS/RS*
*SLP TVS 2300 SuperCharger* *SLP Engine Covers & SLP Boost Gauge Kit* *3.6 Jannetty Pulley*CAI Intake* *Elite CatchCan*VMax Throttle Body* *Stainless Power LT w/HF Cats*ID 85's* *Eibach Pro Kit* *VIS Racing Terminator CF Hood & Trunk*Eibach Pro Kit*  |
|
|
|
09-22-2014, 05:35 AM
|
#2 |
         
Drives: 2011 2SS/RS, '22 Silverado Z71 Join Date: Sep 2010
Location: The First State
Posts: 3,115
|
I've had mine on now for a few months.......I didn't see any issues with quality, but note I did have mine ceramic coated inside and out. As far as power.......I have the LT's with Hi Flows, CAI intake with ADM scope, Magnaflow resonated X pipe, muffler delete, and custom tune and made 375 rwhp and 390 tq with my L99 which for those mods I didn't think was too bad.....considering it was a hot and humid day with 87 octane fuel.
No fitment issues either.
__________________
 Last edited by SILVERHAWK; 09-22-2014 at 11:51 AM. |
|
|
|
|
09-22-2014, 07:48 AM
|
#3 |
|
My Dream Car
Drives: 2011 SIM LS3 1SS Join Date: Jul 2009
Location: staten island
Posts: 1,534
|
have mine on for almost a year. great sound, quality and fit. Good power
__________________
CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing
|
|
|
|
|
09-22-2014, 08:46 AM
|
#4 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
They are a very good set of headers, especially for the money.
|
|
|
|
|
09-22-2014, 12:23 PM
|
#5 |
 
Drives: 11' RJT 2SS/RS L99 Join Date: Jun 2014
Location: Chicago
Posts: 298
|
I've had mine on for around 4 months with no issues. I was Dyno'd at 366 rwhp. The sound is great and the price makes it even better.
__________________
GPI VVT3 Cam
Circle D 3800 Single Disc Stall 1LE 3.91s Stainless Power Headers w/cats Fluidampr 25% UDP Cold Air Inductions Intake Bo White Ported Throttle Body ADM Trans Cooler Some BMR Goodies |
|
|
|
|
09-22-2014, 12:40 PM
|
#6 |
Drives: 2012 45th Anniversary 2SS LS3 Join Date: Feb 2012
Location: Charlotte, NC
Posts: 2,812
|
They are awesome! Sound incredible and put me at 420 rwhp after tune.
__________________
 |
|
|
|
|
09-22-2014, 12:54 PM
|
#7 |
Drives: 73 VETTE ,, 05 2500hd diesel,14 1LE Join Date: Feb 2014
Location: The Left lane PHOENIX AZ
Posts: 2,626
|
I have had mine since May and they are without a doubt the biggest bang for the buck in longtubes. They look and work great make within 2 or 3 hp of any other 1 7/8 long tube on the market . They fit perfectly without any modifications what so ever. yes they are made in China ,and that is unfortunate . Yes they only have a 2 year warrantee ,but they look to be built right and should last much longer .SW had to reduce labor costs and go with a 2 year warrantee to hit that price point . In the end I am well satisfied with the headers and feel like I got more then my moneys worth .
__________________
OLD GUY FLYING FAST AND LOW
|
|
|
|
|
09-22-2014, 01:30 PM
|
#8 |
|
Drives: 2012 Black 2SS/RS M6 Join Date: Mar 2012
Location: Stamford, Connecticut
Posts: 672
|
i have it check my sig for current setup, it's awesome
__________________
Pfadt Race Engineering 1.25" Lowering Springs| Pfadt Spec Performance Street Alignment|ZL1 Front Bumper Conversion|ZL1 20x9 Rims|Pirelli P Zero All Season Plus 275/40R20Y Square Setup||Footwell Lighting|G2 Gold Painted Brake Calipers
Stainless Power Long Tube Headers|Cold Air Inductions Cold Air Intake|VMAX CNC Spiral Ported Throttle Body|Stainless Works Retro Chambered Catback| Vitesse Throttle Controller --Jannetty Racing Enterprises Dyno Tuned|408 RWHP |
|
|
|
|
09-22-2014, 02:59 PM
|
#9 |
 
|
I use them on my car which is at 445rwhp. no problems. great bang for the buck. going FI this week and no plan to change the long tubes.
|
|
|
|
|
09-22-2014, 06:39 PM
|
#10 |
Drives: 2011RedJewel, FI Join Date: Dec 2011
Location: San Antonio,TX
Posts: 816
|
Yup, supercharged here with that set up and they still look great after a year and a half!
|
|
|
|
|
09-23-2014, 12:17 PM
|
#11 |
|
Account Suspended
Drives: 2012 ZL1 & 2010 2SS/RS Join Date: Jul 2009
Location: Maryland
Posts: 3,378
|
They are the "value headers" we recommend. Been selling at a good volume for us. If you have questions, feel free to give us a call!
|
|
|
|
|
09-23-2014, 08:51 PM
|
#12 |
Drives: 2010 ss/rs Join Date: Jun 2013
Location: kansas city missouri
Posts: 247
|
very happy with mine
__________________
rotofab cai
ported throttle body sp headers with cats loud mouth axle back no mufflers tuned by steve williams 6l80etuning.com bmr split springs cam motion custom camshaft btr 660 spring kit maggie 2300 id850 injectors livernois fuel pump |
|
|
|
|
09-24-2014, 08:20 AM
|
#13 |
 
Drives: 2016 1SS Join Date: Apr 2012
Location: Houston, TX
Posts: 3,817
|
The Stainless Power are a great header for the Price. We have installed these on numerous of Camaros over the last several years. Some Camaros Making 700 to the Tires, Supercharged. If you are looking at a Cam and Supercharger Build I recommend not using the high flow cats and going with the Off Road Pipes. These are definitely the "Best Bang for the Buck" Header. When you receive the headers they will come with bolts, O2 Extensions for the Front O2s and Silicone. We do not use the silicone. Instead we reuse the Factory Exhaust Manifold Gasket. It holds up well and can be reused.
  
__________________
 |
|
|
|
|
09-24-2014, 08:43 AM
|
#14 |
|
Lethal installed a set several months ago for me and dyno was 383 rwhp. Very happy with everything about them.
__________________
 |
|
|
|
|
|
|
|
 |
|
|
